Home visit improves knowledge, self-care and adhesion in heart failure: randomized Clinical Trial HELEN-I

OBJECTIVE: To verify the effect of an educative nursing intervention composed of home visits and phone calls on patients' knowledge about the disease, self-care and adhesion to the treatment. METHODS: Randomized clinical trial with patients with recent hospitalization caused by decompensated heart failure. There were two groups: the intervention group, which has received four home visits and four phone calls to reinforce the guidelines during six months of follow up; and the control group, which has received conventional follow up with no visits or phone calls. RESULTS: Two hundred patients were randomized (101 in the intervention group and 99 in the control group). After six months, a significant improvement was observed in self-care and knowledge about the disease in the intervention group (P=0.001 and P<0.001), respectively; the adhesion to the treatment, measured and compared between the groups, was significantly higher in the intervention group (P=0.001). CONCLUSION: the strategy of home visits to patients who were recently hospitalized with decompensated heart failure was effective in improving the outcomes assessed and its implementation deserves to be considered in Brazil aiming at avoiding unplanned hospitalizations. NCT-0121386

Long-term declines in ADLs, IADLs, and mobility among older Medicare beneficiaries

<p>Abstract</p> <p>Background</p> <p>Most prior studies have focused on short-term (≤ 2 years) functional declines. But those studies cannot address aging effects inasmuch as all participants have aged the same amount. Therefore, the authors studied the extent of long-term functional decline in older Medicare beneficiaries who were followed for varying time lengths, and the authors also identified the risk factors associated with those declines.</p> <p>Methods</p> <p>The analytic sample included 5,871 self- or proxy-respondents who had complete baseline and follow-up survey data that could be linked to their Medicare claims for 1993-2007. Functional status was assessed using activities of daily living (ADLs), instrumental ADLs (IADLs), and mobility limitations, with declines defined as the development of two of more new difficulties. Multiple logistic regression analysis was used to focus on the associations involving respondent status, health lifestyle, continuity of care, managed care status, health shocks, and terminal drop.</p> <p>Results</p> <p>The average amount of time between the first and final interviews was 8.0 years. Declines were observed for 36.6% on ADL abilities, 32.3% on IADL abilities, and 30.9% on mobility abilities. Functional decline was more likely to occur when proxy-reports were used, and the effects of baseline function on decline were reduced when proxy-reports were used. Engaging in vigorous physical activity consistently and substantially protected against functional decline, whereas obesity, cigarette smoking, and alcohol consumption were only associated with mobility declines. Post-baseline hospitalizations were the most robust predictors of functional decline, exhibiting a dose-response effect such that the greater the average annual number of hospital episodes, the greater the likelihood of functional status decline. Participants whose final interview preceded their death by one year or less had substantially greater odds of functional status decline.</p> <p>Conclusions</p> <p>Both the additive and interactive (with functional status) effects of respondent status should be taken into consideration whenever proxy-reports are used. Encouraging exercise could broadly reduce the risk of functional decline across all three outcomes, although interventions encouraging weight reduction and smoking cessation would only affect mobility declines. Reducing hospitalization and re-hospitalization rates could also broadly reduce the risk of functional decline across all three outcomes.</p

Requirements Engineering

Requirements Engineering (RE) aims to ensure that systems meet the needs of their stakeholders including users, sponsors, and customers. Often consid- ered as one of the earliest activities in software engineering, it has developed into a set of activities that touch almost every step of the software development process. In this chapter, we reflect on how the need for RE was first recognised and how its foundational concepts were developed. We present the seminal papers on four main activities of the RE process, namely (i) elicitation, (ii) modelling & analysis, (iii) as- surance, and (iv) management & evolution. We also discuss some current research challenges in the area, including security requirements engineering as well as RE for mobile and ubiquitous computing. Finally, we identify some open challenges and research gaps that require further exploration

Recommendations for implementing stereotactic radiotherapy in peripheral stage IA non-small cell lung cancer: report from the Quality Assurance Working Party of the randomised phase III ROSEL study

<p>Abstract</p> <p>Background</p> <p>A phase III multi-centre randomised trial (ROSEL) has been initiated to establish the role of stereotactic radiotherapy in patients with operable stage IA lung cancer. Due to rapid changes in radiotherapy technology and evolving techniques for image-guided delivery, guidelines had to be developed in order to ensure uniformity in implementation of stereotactic radiotherapy in this multi-centre study.</p> <p>Methods/Design</p> <p>A Quality Assurance Working Party was formed by radiation oncologists and clinical physicists from both academic as well as non-academic hospitals that had already implemented stereotactic radiotherapy for lung cancer. A literature survey was conducted and consensus meetings were held in which both the knowledge from the literature and clinical experience were pooled. In addition, a planning study was performed in 26 stage I patients, of which 22 were stage 1A, in order to develop and evaluate the planning guidelines. Plans were optimised according to parameters adopted from RTOG trials using both an algorithm with a simple homogeneity correction (Type A) and a more advanced algorithm (Type B). Dose conformity requirements were then formulated based on these results.</p> <p>Conclusion</p> <p>Based on current literature and expert experience, guidelines were formulated for this phase III study of stereotactic radiotherapy versus surgery. These guidelines can serve to facilitate the design of future multi-centre clinical trials of stereotactic radiotherapy in other patient groups and aid a more uniform implementation of this technique outside clinical trials.</p

Combined measurement of differential and total cross sections in the H → γγ and the H → ZZ* → 4ℓ decay channels at s=13 TeV with the ATLAS detector

A combined measurement of differential and inclusive total cross sections of Higgs boson production is performed using 36.1 fb−1 of 13 TeV proton–proton collision data produced by the LHC and recorded by the ATLAS detector in 2015 and 2016. Cross sections are obtained from measured H→γγ and H→ZZ*(→4ℓ event yields, which are combined taking into account detector efficiencies, resolution, acceptances and branching fractions. The total Higgs boson production cross section is measured to be 57.0−5.9 +6.0 (stat.) −3.3 +4.0 (syst.) pb, in agreement with the Standard Model prediction. Differential cross-section measurements are presented for the Higgs boson transverse momentum distribution, Higgs boson rapidity, number of jets produced together with the Higgs boson, and the transverse momentum of the leading jet. The results from the two decay channels are found to be compatible, and their combination agrees with the Standard Model predictions

Search for High-Mass Resonances Decaying to τν in pp Collisions at √s=13 TeV with the ATLAS Detector

A search for high-mass resonances decaying to τν using proton-proton collisions at √s=13 TeV produced by the Large Hadron Collider is presented. Only τ-lepton decays with hadrons in the final state are considered. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 36.1 fb−1. No statistically significant excess above the standard model expectation is observed; model-independent upper limits are set on the visible τν production cross section. Heavy W′ bosons with masses less than 3.7 TeV in the sequential standard model and masses less than 2.2–3.8 TeV depending on the coupling in the nonuniversal G(221) model are excluded at the 95% credibility level

Measurement of the t¯tZ and t¯tW cross sections in proton-proton collisions at √s=13 TeV with the ATLAS detector

A measurement of the associated production of a top-quark pair (t¯t) with a vector boson (W, Z) in proton-proton collisions at a center-of-mass energy of 13 TeV is presented, using 36.1  fb−1 of integrated luminosity collected by the ATLAS detector at the Large Hadron Collider. Events are selected in channels with two same- or opposite-sign leptons (electrons or muons), three leptons or four leptons, and each channel is further divided into multiple regions to maximize the sensitivity of the measurement. The t¯tZ and t¯tW production cross sections are simultaneously measured using a combined fit to all regions. The best-fit values of the production cross sections are σt¯tZ=0.95±0.08stat±0.10syst pb and σt¯tW=0.87±0.13stat±0.14syst pb in agreement with the Standard Model predictions. The measurement of the t¯tZ cross section is used to set constraints on effective field theory operators which modify the t¯tZ vertex

Performance of missing transverse momentum reconstruction with the ATLAS detector using proton–proton collisions at √s = 13 TeV

The performance of the missing transverse momentum (EmissT) reconstruction with the ATLAS detector is evaluated using data collected in proton–proton collisions at the LHC at a centre-of-mass energy of 13 TeV in 2015. To reconstruct EmissT, fully calibrated electrons, muons, photons, hadronically decaying τ -leptons, and jets reconstructed from calorimeter energy deposits and charged-particle tracks are used. These are combined with the soft hadronic activity measured by reconstructed charged-particle tracks not associated with the hard objects. Possible double counting of contributions from reconstructed charged-particle tracks from the inner detector, energy deposits in the calorimeter, and reconstructed muons from the muon spectrometer is avoided by applying a signal ambiguity resolution procedure which rejects already used signals when combining the various EmissT contributions. The individual terms as well as the overall reconstructed EmissT are evaluated with various performance metrics for scale (linearity), resolution, and sensitivity to the data-taking conditions. The method developed to determine the systematic uncertainties of the EmissT scale and resolution is discussed. Results are shown based on the full 2015 data sample corresponding to an integrated luminosity of 3.2 fb−1

Operation and performance of the ATLAS Tile Calorimeter in Run 1

The Tile Calorimeter is the hadron calorimeter covering the central region of the ATLAS experiment at the Large Hadron Collider. Approximately 10,000 photomultipliers collect light from scintillating tiles acting as the active material sandwiched between slabs of steel absorber. This paper gives an overview of the calorimeter’s performance during the years 2008–2012 using cosmic-ray muon events and proton–proton collision data at centre-of-mass energies of 7 and 8TeV with a total integrated luminosity of nearly 30 fb−1. The signal reconstruction methods, calibration systems as well as the detector operation status are presented. The energy and time calibration methods performed excellently, resulting in good stability of the calorimeter response under varying conditions during the LHC Run 1. Finally, the Tile Calorimeter response to isolated muons and hadrons as well as to jets from proton–proton collisions is presented. The results demonstrate excellent performance in accord with specifications mentioned in the Technical Design Report