Pd/Ni Synergestic Activity for Hydrogen Oxidation Reaction in Alkaline Conditions

Abstract The investigation of hydrogen oxidation reaction (HOR) in alkaline conditions has been the subject of a wide interest in the past few years with the rise of alkaline membrane fuel cells (AMFCs). In particular, the quest for the lowest content of platinum group metals (PGMs) in the HOR catalyst is ongoing. In this article, we propose the use of a nanoscale Pd layer partially covering a Ni film to provide the most efficient use of the PGM in the HOR catalyst. The Pd/Ni electrodes were prepared by spontaneous and electrolytic deposition of Pd onto smooth polycrystalline Ni surfaces with different surface compositions. The electrodes were characterized by cyclic voltammetry and atomic force microscopy. Electrocatalytic activity in HOR of the Pd/Ni electrodes was measured in alkaline solution by rotating disc electrode method. In the manuscript, we demonstrate that a Pd coverage as low as 1.5% vs. Ni coverage is sufficient to provide a high current density compared to pure Ni. The current density linearly increases with the Pd coverage up to a Pd coverage of 17%; upon further increase in the Pd coverage, the current density reaches a plateau, i.e. the diffusion limit for the HOR process. The comparison with Pd supported on carbon shows the clear benefit for the bimetallic catalyst

Directed deposition of nickel nanoparticles using self-assembled organic template

Self-assembled organic monolayers are useful templates for nanofabrication. Ordered layer of long alkyl-chain molecules can direct the wet chemical deposition of metallic coatings on different substrates. Ordered structures of fatty acids and their motions on the phenyloctane/HOPG interface are observed by scanning tunneling microscopy (STM). Modification of self-assembled fatty acid patterns due to hydroxamic acid presence is also in the focus of the research. Fatty acid layer formation, the structure of the formed thin film on solid/liquid interface, and simultaneous nickel colloidal deposition have been investigated

Photo-Crosslinkable Colloids: From Fluid Structure and Dynamics of Spheres to Suspensions of Ellipsoids

Recently-developed photo-crosslinkable PMMA (polymethylmethacrylate) colloidal spheres are a highly promising system for fundamental studies in colloidal physics and may have a wide range of future technological applications. We synthesize these colloids and characterize their size distribution. Their swelling in a density- and index- matching organic solvent system is demonstrated and we employ dynamic light scattering (DLS), as also the recently-developed confocal differential dynamic microscopy (ConDDM), to characterize the structure and the dynamics of a fluid bulk suspension of such colloids at different particle densities, detecting significant particle charging effects. We stretch these photo-crosslinkable spheres into ellipsoids. The fact that the ellipsoids are cross-linked allows them to be fluorescently stained, permitting a dense suspension of ellipsoids, a simple model of fluid matter, to be imaged by direct confocal microscopy

Zigzag-shaped nickel nanowires via organometallic template-free route

In this manuscript, the formation of nickel nanowires (average size: several tens to hundreds of μm long and 1.0-1.5 μm wide) at low temperature is found to be driven by dewetting of liquid organometallic precursors during spin coating process and by self-assembly of Ni clusters. Elaboration of metallic thin films by low temperature deposition technique makes the preparation process compatible with most of the substrates. The use of iron and cobalt precursor shows that the process could be extended to other metallic systems. In this work, AFM and SEM are used to follow the assembly of Ni clusters into straight or zigzag lines. The formation of zigzag structure is specific to the Ni precursor at appropriate preparation parameters. This template free process allows a control of anisotropic structures with homogeneous sizes and angles on standard Si/SiO2 surface

Hadron Energy Reconstruction for the ATLAS Calorimetry in the Framework of the Non-parametrical Method

This paper discusses hadron energy reconstruction for the ATLAS barrel prototype combined calorimeter (consisting of a lead-liquid argon electromagnetic part and an iron-scintillator hadronic part) in the framework of the non-parametrical method. The non-parametrical method utilizes only the known $e/h$ ratios and the electron calibration constants and does not require the determination of any parameters by a minimization technique. Thus, this technique lends itself to an easy use in a first level trigger. The reconstructed mean values of the hadron energies are within $\pm 1$ of the true values and the fractional energy resolution is $[(58\pm3)/\sqrt{E}+(2.5\pm0.3)$. The value of the $e/h$ ratio obtained for the electromagnetic compartment of the combined calorimeter is $1.74\pm0.04$ and agrees with the prediction that $e/h > 1.7$ for this electromagnetic calorimeter. Results of a study of the longitudinal hadronic shower development are also presented. The data have been taken in the H8 beam line of the CERN SPS using pions of energies from 10 to 300 GeV.Comment: 33 pages, 13 figures, Will be published in NIM

Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS

The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured

Measurement of the production of a W boson in association with a charm quark in pp collisions at √s = 7 TeV with the ATLAS detector

The production of a W boson in association with a single charm quark is studied using 4.6 fb−1 of pp collision data at s√ = 7 TeV collected with the ATLAS detector at the Large Hadron Collider. In events in which a W boson decays to an electron or muon, the charm quark is tagged either by its semileptonic decay to a muon or by the presence of a charmed meson. The integrated and differential cross sections as a function of the pseudorapidity of the lepton from the W-boson decay are measured. Results are compared to the predictions of next-to-leading-order QCD calculations obtained from various parton distribution function parameterisations. The ratio of the strange-to-down sea-quark distributions is determined to be 0.96+0.26−0.30 at Q 2 = 1.9 GeV2, which supports the hypothesis of an SU(3)-symmetric composition of the light-quark sea. Additionally, the cross-section ratio σ(W + +c¯¯)/σ(W − + c) is compared to the predictions obtained using parton distribution function parameterisations with different assumptions about the s−s¯¯¯ quark asymmetry

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

Search for a CP-odd Higgs boson decaying to Zh in pp collisions at √s=8TeV with the ATLAS detector

A search for a heavy, CP-odd Higgs boson, A, decaying into a Zboson and a 125GeV Higgs boson, h, with the ATLAS detector at the LHC is presented. The search uses proton–proton collision data at a centre-of-mass energy of 8TeV corresponding to an integrated luminosity of 20.3fb−1. Decays of CP-even hbosons to ττor bbpairs with the Zboson decaying to electron or muon pairs are considered, as well as h →bbdecays with the Zboson decaying to neutrinos. No evidence for the production of an Aboson in these channels is found and the 95% confidence level upper limits derived for σ(gg→A) ×BR(A →Zh) ×BR(h →f¯f)are 0.098–0.013pb for f=τand 0.57–0.014pb for f=bin a range of mA=220–1000GeV. The results are combined and interpreted in the context of two-Higgs-doublet models. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons