Microalgal systems for wastewater treatment: technological trends and challenges towards waste recovery

Wastewater (WW) treatment using microalgae has become a growing trend due the economic and environmental benefits of the process. As microalgae need CO2, nitrogen, and phosphorus to grow, they remove these potential pollutants from wastewaters, making them able to replace energetically expensive treatment steps in conventional WW treatment. Unlike traditional sludge, biomass can be used to produce biofuels, biofertilizers, high value chemicals, and even next-generation growth media for “organically” grown microalgal biomass targeting zero-waste policies and contributing to a more sustainable circular bioeconomy. The main challenge in this technology is the techno-economic feasibility of the system. Alternatives such as the isolation of novel strains, the use of native consortia, and the design of new bioreactors have been studied to overcome this and aid the scale-up of microalgal systems. This review focuses on the treatment of urban, industrial, and agricultural wastewaters by microalgae and their ability to not only remove, but also promote the reuse, of those pollutants. Opportunities and future prospects are discussed, including the upgrading of the produced biomass into valuable compounds, mainly biofuels.This research was funded by the Foundation for Science and Technology (FCT) through UIDB/04326/2020 and the GreenTreat (PTDC/BTA-BTA/31567/2017) and Red CYTED P319RT0025— RENUWAL—Red Iberoamericana para el Tratamiento de Efluentes con Microalgas projects and CRESC-Algarve and the European Regional Development Fund (ERDF) programs via the ALGAVALOR (ALG-01-0247-FEDER-035234) project.info:eu-repo/semantics/publishedVersio

Distribution of black flies (Diptera: Simuliidae) in the State of Espírito Santo, Brazil

Entre os anos de 2004 e 2008 foram realizadas coletas de Simuliidae em várias localidades no Estado do Espírito Santo, Brasil. No total, 66 córregos e rios das doze principais bacias hidrográficas do estado foram amostrados. Dezessete espécies foram coletadas, sendo que nove delas representam ocorrências novas para o estado (Simulium pertinax, S. jujuyense, S. rubrithorax, S. subnigrum, S. travassosi, S. spinibranchium, S. hirtipupa, S. lutzianum e S. anamariae), duplicando o número de espécies conhecidas no estado.We conducted a freshwater survey from 2004 to 2008 in several localities of Espírito Santo, Brazil. In total, 66 streams and rivers were sampled in the 12 hydrographic basins of the state. We collected and identified 17 species of which nine represent new records (Simulium pertinax, S. jujuyense, S. rubrithorax, S. subnigrum, S. travassosi, S. spinibranchium, S. hirtipupa, S. lutzianum e S. anamariae). These findings doubled the number of records of black fly species to the State of Espírito Santo, Brazil

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Timing and severity of inhibitor development in recombinant versus plasma-derived factor VIII concentrates: a SIPPET analysis

Essentials Recombinant factor VIII (rFVIII) was contrasted with plasma-derived FVIII (pdFVIII). In previously untreated patients with hemophilia A, rFVIII led to more inhibitors than pdFVIII. Inhibitors with rFVIII developed earlier, and the peak rate was higher than with pdFVIII. Inhibitors with rFVIII were more severe (higher titre) than with pdFVIII. Summary: Background The development of neutralizing antibodies (inhibitors) against factor VIII (FVIII) is the most severe complication in the early phases of treatment of severe hemophilia A. Recently, a randomized trial, the Survey of Inhibitors in Plasma-Product Exposed Toddlers (SIPPET) demonstrated a 2-fold higher risk of inhibitor development in children treated with recombinant FVIII (rFVIII) products than with plasma-derived FVIII (pdFVIII) during the first 50 exposure days (EDs). Objective/Methods In this post-hoc SIPPET analysis we evaluated the rate of inhibitor incidence over time by every 5 EDs (from 0 to 50 EDs) in patients treated with different classes of FVIII product, made possible by a frequent testing regime. Results The highest rate of inhibitor development occurred in the first 10 EDs, with a large contrast between rFVIII and pdFVIII during the first 5 EDs: hazard ratio 3.14 (95% confidence interval [CI], 1.01\ue2\u80\u939.74) for all inhibitors and 4.19 (95% CI, 1.18\ue2\u80\u9314.8) for high-titer inhibitors. For patients treated with pdFVIII, the peak of inhibitor development occurred later (6\ue2\u80\u9310 EDs) and lasted for a shorter time. Conclusion These results emphasize the high immunologic vulnerability of patients during the earliest exposure to FVIII concentrates, with the strongest response to recombinant FVIII products

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements