Validation of the disease burden morbidity assessment by self-report in a French-speaking population

<p>Abstract</p> <p>Background</p> <p>The Disease Burden Morbidity Assessment (DBMA) is a self-report questionnaire used to estimate the disease burden experienced by patients. The aim of this study was to test and to measure the properties of the French translation of the DBMA (DBMA-Fv).</p> <p>Methods</p> <p>The original version of the DBMA was translated into French (Canadian) and first assessed during cognitive interviews. In the validation study, patients recruited during consecutive consultation periods completed the DBMA-Fv questionnaire while they were in the waiting room of a primary care setting (T1). Participants completed the same questionnaire mailed to their home two weeks later (T2). Concomitant validity of the DBMA-Fv was assessed using the Cumulative Illness Rating Scale (CIRS). Patient medical records were reviewed to verify chronic diseases and past medical history.</p> <p>Results</p> <p>Ninety-seven patients were recruited and 85 (88%) returned the mailed questionnaires; 5 (5.9%) were incomplete. DBMA-Fv scores of the 80 participants with a complete questionnaire at T2 ranged from 0 to 30 (median 5.5, mean 7.7, SD = 7.0). Test-retest reliability of the DBMA-Fv was high (ICC: 0.86, 95% CI: 0.79-0.92). The DBMA-Fv and the CIRS correlated moderately at T1 (r = 0.46, 95% CI: 0.26 - 0.62, <it>p </it>< 0.01) and T2 (r = 0.56, 95% CI: 0.38 - 0.70, <it>p </it>< 0.01). The mean (SD) sensitivity of patient reports of a condition in relation to chart review at T2 was 73.9 (8.4) (range 62.5% to 90%). The overall mean (SD) specificity was 92.2 (6.7) (range 77.6% to 98.6%).</p> <p>Conclusions</p> <p>The DBMA-Fv's properties are similar to its English counterpart as to its median sensitivity and specificity compared to chart reviews. It correlated moderately with an established index of multimorbidity. A high percentage of patients were able to complete the test correctly as a mail questionnaire and it showed high test-retest reliability.</p

How to Blend a Robot within a Group of Zebrafish: Achieving Social Acceptance through Real-time Calibration of a Multi-level Behavioural Model

We have previously shown how to socially integrate a fish robot into a group of zebrafish thanks to biomimetic behavioural models. The models have to be calibrated on experimental data to present correct behavioural features. This calibration is essential to enhance the social integration of the robot into the group. When calibrated, the behavioural model of fish behaviour is implemented to drive a robot with closed-loop control of social interactions into a group of zebrafish. This approach can be useful to form mixed-groups, and study animal individual and collective behaviour by using biomimetic autonomous robots capable of responding to the animals in long-standing experiments. Here, we show a methodology for continuous real-time calibration and refinement of multi-level behavioural model. The real-time calibration, by an evolutionary algorithm, is based on simulation of the model to correspond to the observed fish behaviour in real-time. The calibrated model is updated on the robot and tested during the experiments. This method allows to cope with changes of dynamics in fish behaviour. Moreover, each fish presents individual behavioural differences. Thus, each trial is done with naive fish groups that display behavioural variability. This real-time calibration methodology can optimise the robot behaviours during the experiments. Our implementation of this methodology runs on three different computers that perform individual tracking, data-analysis, multi-objective evolutionary algorithms, simulation of the fish robot and adaptation of the robot behavioural models, all in real-time.Comment: 9 pages, 3 figure

Co-morbidity and visual acuity are risk factors for health-related quality of life decline: five-month follow-up EQ-5D data of visually impaired older patients

<p>Abstract</p> <p>Background</p> <p>Co-morbidity is a common phenomenon in the elderly and is considered to be a major threat to quality of life (QOL). Knowledge of co-existing conditions or patient characteristics that lead to an increased QOL decline is important for individual care, and for public health purposes. In visually impaired older adults, it remains unclear which co-existing conditions or other characteristics influence their health-related QOL. Our aim was to present a risk profile of characteristics and conditions which predict deterioration of QOL in visually impaired older patients.</p> <p>Methods</p> <p>Analyses were performed on data from an observational study among 296 visually impaired older patients from four Dutch hospitals. QOL was measured with the EuroQol-5D (EQ-5D) at baseline and at five-month follow-up. Nine co-existing condition categories (musculoskeletal; diabetes; heart; hypertension; chronic obstructive pulmonary disease (COPD) or asthma; hearing impairment; stroke; cancer; gastrointestinal conditions) and six patient characteristics (age; gender; visual acuity; social status; independent living; rehabilitation type) were tested in a linear regression model to determine the risk profile. The model was corrected for baseline EQ-5D scores. In addition, baseline EQ-5D scores were compared with reference scores from a younger visually impaired population and from elderly in the general population.</p> <p>Results</p> <p>From the 296 patients, 50 (16.9%) were lost to follow-up. Patients who reported diabetes, COPD or asthma, consequences of stroke, musculoskeletal conditions, cancer, gastrointestinal conditions or higher logMAR Visual Acuity values, experienced a lower QOL. After five months, visual acuity, musculoskeletal conditions, COPD/asthma and stroke predicted a decline in QOL (R²= 0.20). At baseline, the visually impaired older patients more often reported moderate or severe problems on most EQ-5D dimensions than the two reference groups.</p> <p>Conclusion</p> <p>In visually impaired older patients, visual acuity, musculoskeletal conditions, COPD/asthma and stroke predicted a relatively rapid decline in health-related QOL. With this risk profile, a specific referral by the ophthalmologist to another sub-specialty may have a beneficial effect on the patient's health-related QOL. A referral by the ophthalmologist or optometrist to a multidisciplinary rehabilitation service seems appropriate for some patients with co-morbidity. The current results need to be confirmed in studies using pre-structured questionnaires to assess co-morbidity.</p

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Search for pair-produced long-lived neutral particles decaying to jets in the ATLAS hadronic calorimeter in ppcollisions at √s=8TeV

The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3fb−1of data collected in proton–proton collisions at √s=8TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeVto 900 GeV, and a long-lived neutral particle mass from 10 GeVto 150 GeV

Viability of Bifidobacterium longum in cheddar cheese curd during manufacture and storage: effect of microencapsulation and point of inoculation

International audienceThe goal of this study was to assess the effect of methods of inoculation on the viability of probiotic bacteria during cheddar cheese manufacture as well as their stability during storage. Bifidobacterium longum ATCC 15708 was freeze-dried and microencapsulated by spray-coating. The effect of inoculation of free whole cell or microencapsulated cells at three points during manufacture (milk before renneting, at cheddaring or at salting) on the viable counts in cheese and whey was investigated. Microencapsulation had no effect on viable counts, chemical parameters (lactose, lactic acid, total nitrogen, nitrogen soluble in TCA, moisture) or sensory properties during manufacturing or storage of the fresh cheeses for 14 days. Inoculation of the bifidobacteria in milk before renneting resulted in higher viable counts in comparison to other points of inoculation. Bifidobacteria added at the salting step, which survived pressing, were subsequently more stable during storage than those inoculated in milk. The stability of B. longum 15708 during storage was greater in the pressed cheeses that in the free curds. The results of this study provides technological data for cheese makers on the optimum point of inoculation as well as the benefit of pressing the curds in order to ensure high levels of probiotics in fresh cheddar cheese