Briquette Combustion Characteristics of Cerbera Manghas Leaves with Rejected Pineapple as Binding Agent as a Sustainable Fuel

Litter from fallen leaves of the Cerbera manghas plant is commonly found throughout Indonesia. Various studies have shown that briquettes formed from the falling leaves of Cerbera manghas may be able to reduce waste and be used as a new energy source. However, previous studies employed tapioca as a binding agent for briquettes, which is an edible starch, and their use as a binder competes with the availability of food resources. Alternatively, rejected pineapple would be used as a binding agent to remedy the problem since it is not edible and reduces unused waste. The briquette was subsequently researched to determine the optimal production parameters as well as its potential as a sustainable fuel. The 95% to 5% ratio of biomass to briquette is used to achieve a high calorific value of 4338.79 kcal/kg while maintaining the structure of the briquette in check. The usage of this briquette is supported by both the calorific value test and ultimate analyses. According to the research on the four combustion characteristics (ignition time, burning temperature, combustion rate, and burning time), the composition that gives the best briquette is obtained by using a particle size of 60 mesh and compressed by the hydraulic pressure of 2 MPa

Sustainable product development of biomass briquette from Samanea saman leaf waste with rejected papaya as the binding agent in Indonesia

The depletion of solid fuels in the world triggers the requirement for the existence of an alternative fuel product as a substitute. In several studies, briquettes have become one of the alternatives used to deal with this problem. However, the selection of briquette material that considers its impact on economic, social, and environmental aspects has not been widely carried out. To solve this problem, the selection of raw materials for briquettes must be determined using the concept of sustainable product development (SPD). SPD is a concept that can be used to determine a new product by considering various aspects, including economic, environmental, and social aspects. Briquette fuel that is derived from leaf waste and rejected fruit as a binding agent can be an alternative to renewable solid fuels since the raw materials come from wastes that have no selling value. The methodology used in this research is by conducting a survey at five markets in Surabaya and proceeding with interviews with the local government official. Pugh Matrix Concept Selection (PMCS) method is used to determine the suitable raw materials and to analyze the sustainability of the product development. Through PMCS, the results show that the best material for briquette production based on economic, social, and environmental aspects is a mixture of Samanea saman leaf waste with a 12.83 rating value and rejected papaya as the binding agent with a 10.44 rating value. Briquette with a mixture of 95% Samanea saman leaf waste and 5% rejected papaya is produced with a mesh size of 60 or 250 μm and a compression pressure of 2 MPa and is identified to have a heating value of 4025.87 Kcal/Kg

Who\u27s accessing emergency food services?

Introduction: Last year, Chittenden Emergency Food Shelf provided 1,260,517 pounds of food to over 11,000 people each month via groceries, hot meals and home delivery, supplying an average of almost 40% of food for families. CEFS seeks to improve their services and offerings by better understanding the demographics, food preference, and needs of the clients they serve. Our goal was to collect demographic and utilization data to identify areas where CEFS could enhance services and improve client access to healthful food.https://scholarworks.uvm.edu/comphp_gallery/1208/thumbnail.jp

Are we ready to track climate-driven shifts in marine species across international boundaries? - A global survey of scientific bottom trawl data

Marine biota are redistributing at a rapid pace in response to climate change and shifting seascapes. While changes in fish populations and community structure threaten the sustainability of fisheries, our capacity to adapt by tracking and projecting marine species remains a challenge due to data discontinuities in biological observations, lack of data availability, and mismatch between data and real species distributions. To assess the extent of this challenge, we review the global status and accessibility of ongoing scientific bottom trawl surveys. In total, we gathered metadata for 283,925 samples from 95 surveys conducted regularly from 2001 to 2019. We identified that 59% of the metadata collected are not publicly available, highlighting that the availability of data is the most important challenge to assess species redistributions under global climate change. Given that the primary purpose of surveys is to provide independent data to inform stock assessment of commercially important populations, we further highlight that single surveys do not cover the full range of the main commercial demersal fish species. An average of 18 surveys is needed to cover at least 50% of species ranges, demonstrating the importance of combining multiple surveys to evaluate species range shifts. We assess the potential for combining surveys to track transboundary species redistributions and show that differences in sampling schemes and inconsistency in sampling can be overcome with spatio-temporal modeling to follow species density redistributions. In light of our global assessment, we establish a framework for improving the management and conservation of transboundary and migrating marine demersal species. We provide directions to improve data availability and encourage countries to share survey data, to assess species vulnerabilities, and to support management adaptation in a time of climate-driven ocean changes.En prensa6,86

Evaluation of a quality improvement intervention to reduce anastomotic leak following right colectomy (EAGLE): pragmatic, batched stepped-wedge, cluster-randomized trial in 64 countries

Background Anastomotic leak affects 8 per cent of patients after right colectomy with a 10-fold increased risk of postoperative death. The EAGLE study aimed to develop and test whether an international, standardized quality improvement intervention could reduce anastomotic leaks. Methods The internationally intended protocol, iteratively co-developed by a multistage Delphi process, comprised an online educational module introducing risk stratification, an intraoperative checklist, and harmonized surgical techniques. Clusters (hospital teams) were randomized to one of three arms with varied sequences of intervention/data collection by a derived stepped-wedge batch design (at least 18 hospital teams per batch). Patients were blinded to the study allocation. Low- and middle-income country enrolment was encouraged. The primary outcome (assessed by intention to treat) was anastomotic leak rate, and subgroup analyses by module completion (at least 80 per cent of surgeons, high engagement; less than 50 per cent, low engagement) were preplanned. Results A total 355 hospital teams registered, with 332 from 64 countries (39.2 per cent low and middle income) included in the final analysis. The online modules were completed by half of the surgeons (2143 of 4411). The primary analysis included 3039 of the 3268 patients recruited (206 patients had no anastomosis and 23 were lost to follow-up), with anastomotic leaks arising before and after the intervention in 10.1 and 9.6 per cent respectively (adjusted OR 0.87, 95 per cent c.i. 0.59 to 1.30; P = 0.498). The proportion of surgeons completing the educational modules was an influence: the leak rate decreased from 12.2 per cent (61 of 500) before intervention to 5.1 per cent (24 of 473) after intervention in high-engagement centres (adjusted OR 0.36, 0.20 to 0.64; P < 0.001), but this was not observed in low-engagement hospitals (8.3 per cent (59 of 714) and 13.8 per cent (61 of 443) respectively; adjusted OR 2.09, 1.31 to 3.31). Conclusion Completion of globally available digital training by engaged teams can alter anastomotic leak rates. Registration number: NCT04270721 (http://www.clinicaltrials.gov)