The LHCb Outer Tracker Front End Electronics

This note provides an overview of the front-end electronics used to readout the drift-times of the LHCb Outer Tracker straw tube chambers. The main functional components of the readout are the ASDBLR ASIC for amplification and signal digitization, the OTIS ASIC for the time measurement and for the L0 buffering, and the GOL ASIC to serialize the digital data for the optical data transmission. The L1 buffer board used to receive the data which is sent via the optical link is a common LHCb development and is not described here. This note supersedes an earlier document [1]

OT FE-Box Test Procedures

The OT FE readout requirements is the precise (~0.5 ns) and efficient drift time measurement at an occupancy of ~4% to ensure single hit resolution. The acquired achievement of such performance on an assembled FE-Box is verify through a final test performed using a special FE-Tester. In this note the test procedures are described

Children’s perceptions of dissimilarity in parenting styles are associated with internalizing and externalizing behavior

The purpose of this study was to examine the relationship between children’s perception of dissimilarity in parenting styles, and internalizing and externalizing problems in children. Children from the general population (n = 658) reported on the level of emotional warmth, rejection, and overprotection of both parents by filling out the child version of the Egna Minnen Beträffande Uppfostran (EMBU-C) and mothers completed the child behavior checklist (CBCL). Intraclass correlations were computed as measures of dissimilarity between parenting styles of mothers and fathers. Children’s perceived dissimilarity in parental emotional warmth is associated with internalizing and externalizing problems (β = 0.092, p < 0.05; β = 0.091, p < 0.05). Perceived dissimilarity between parents’ overprotection is associated with externalizing problems (β = 0.097, p < 0.05). Perceived dissimilarity between parenting styles is associated with externalizing and internalizing problems, over and above the effects of the level of the parenting styles. The results highlight the negative consequences of perceived dissimilarity between parents. To conclude, children have more internalizing and externalizing problems when they perceive their parents as more dissimilar in parenting styles

Performance of the LHCb outer tracker

The LHCb Outer Tracker is a gaseous detector covering an area of 5 × 6 m2 with 12 double layers of straw tubes. The detector with its services are described together with the commissioning and calibration procedures. Based on data of the first LHC running period from 2010 to 2012, the performance of the readout electronics and the single hit resolution and efficiency are presented. The efficiency to detect a hit in the central half of the straw is estimated to be 99.2%, and the position resolution is determined to be approximately 200 μm. The Outer Tracker received a dose in the hottest region corresponding to 0.12 C/cm, and no signs of gain deterioration or other ageing effects are observed

Deep sea tests of a prototype of the KM3NeT digital optical module

The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deepwaters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same (40)Kdecay and the localisation of bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions

Detection potential of the KM3NeT detector for high-energy neutrinos from the Fermi bubbles

A recent analysis of the Fermi Large Area Telescope data provided evidence for a high-intensity emission of high-energy gamma rays with a E 2 spectrum from two large areas, spanning 50 above and below the Galactic centre (the ‘‘Fermi bubbles’’). A hadronic mechanism was proposed for this gamma-ray emission making the Fermi bubbles promising source candidates of high-energy neutrino emission. In this work Monte Carlo simulations regarding the detectability of high-energy neutrinos from the Fermi bubbles with the future multi-km3 neutrino telescope KM3NeT in the Mediterranean Sea are presented. Under the hypothesis that the gamma-ray emission is completely due to hadronic processes, the results indicate that neutrinos from the bubbles could be discovered in about one year of operation, for a neutrino spectrum with a cutoff at 100 TeV and a detector with about 6 km3 of instrumented volume. The effect of a possible lower cutoff is also considered.Published7–141.8. Osservazioni di geofisica ambientaleJCR Journalrestricte

Expansion cone for the 3-inch PMTs of the KM3NeT optical modules

[EN] Detection of high-energy neutrinos from distant astrophysical sources will open a new window on the Universe. The detection principle exploits the measurement of Cherenkov light emitted by charged particles resulting from neutrino interactions in the matter containing the telescope. A novel multi-PMT digital optical module (DOM) was developed to contain 31 3-inch photomultiplier tubes (PMTs). In order to maximize the detector sensitivity, each PMT will be surrounded by an expansion cone which collects photons that would otherwise miss the photocathode. Results for various angles of incidence with respect to the PMT surface indicate an increase in collection efficiency by 30% on average for angles up to 45 degrees with respect to the perpendicular. Ray-tracing calculations could reproduce the measurements, allowing to estimate an increase in the overall photocathode sensitivity, integrated over all angles of incidence, by 27% (for a single PMT). Prototype DOMs, being built by the KM3NeT consortium, will be equipped with these expansion cones.This work is supported through the EU, FP6 Contract no. 011937, FP7 grant agreement no. 212252, and the Dutch Ministry of Education, Culture and Science.Adrián Martínez, S.; Ageron, M.; Aguilar, JA.; Aharonian, F.; Aiello, S.; Albert, A.; Alexandri, M.... (2013). Expansion cone for the 3-inch PMTs of the KM3NeT optical modules. Journal of Instrumentation. 8(3):1-19. https://doi.org/10.1088/1748-0221/8/03/T03006S1198

A photonic readout and data acquisition system for deep-sea neutrino telescopes

In the context of the KM3NeT Design Study and building on the experience with the data acquisition system of the ANTARES telescope, an alternative readout and DAQ architecture has been developed for deep-sea neutrino telescopes. The system relies on sensor technology using photonic readout and a 10 Gb/s optical network for data acquisition and communication. Compared to ANTARES, more functionality has been migrated to the shore, thus allowing for timely deployment of the telescope components and easy access to the system during the long lifetime of neutrino telescopes. Also the reconfiguration of the DAQ system is located on shore. Timing calibration is an integral part of the network architecture providing an event timing integrity with less than 1 ns. Although developed for use in the deep-sea, the concept of the system can be used in other applications, e.g. in the LHC experiments