Room temperature near-ultraviolet emission from In-rich InGaN/GaN multiple quantum wells

We grew In-rich InGaNGaN multiple quantum wells (MQWs) using growth interruption (GI) by metalorganic chemical vapor deposition. The quality of overgrown InGaNGaN QW layers in MQWs was largely affected by the crystalline quality and interfacial abruptness of the underlying QW layer. Introduction of 10 s GI was very effective in improving the crystalline quality and interfacial abruptness of InGaN QW layers, and we grew a ten periods of 1-nm -thick In-rich InGaNGaN MQW with 10 s GI and obtained a strong near-ultraviolet (UV) emission (~390 nm) at room temperature. We believe that use of less than 1-nm -thick In-rich InGaN MQW can be a candidate for near-UV source, which might replace the conventional low-indium content (<10%), thicker InGaN QW layer.open313

A hybrid algorithm for a vehicle routing problem with realistic constraints

Proliferation of multi-national corporations and extremely competitive business environments have led to an unprecedented demand for third-party logistics services. However, recent studies on the vehicle routing problem (VRP) have considered only simple constraints. They also do not scale well to real-world problems that are encountered in the logistics industry. In this paper, we introduce a novel vehicle routing problem with time window and pallet loading constraints; this problem accounts for the actual needs of businesses in the logistics industry such as the delivery of consumer goods and agricultural products. To solve this new VRP, we propose a hybrid approach by combining Tabu search and the artificial bee colony algorithm. A new benchmark data set is generated to verify the performance of the proposed algorithm because the proposed VRP has never been reported in the literature. Experiments are performed for a data set of Solomon's 56 vehicle routing problem with time windows. Our approach is superior to a number of other heuristic algorithms in a comparison on Solomon's VRPTW instances. © 2017 Elsevier Inc

Calcium-fortified beverage supplementation on body composition in postmenopausal women

BACKGROUND: We investigated the effects of a calcium-fortified beverage supplemented over 12 months on body composition in postmenopausal women (n = 37, age = 48–75 y). METHODS: Body composition (total-body percent fat, %Fat(TB); abdominal percent fat, %Fat(AB)) was measured with dual energy x-ray absorptiometry. After baseline assessments, subjects were randomly assigned to a free-living control group (CTL) or the supplement group (1,125 mg Ca(++)/d, CAL). Dietary intake was assessed with 3-day diet records taken at baseline and 12 months (POST). Physical activity was measured using the Yale Physical Activity Survey. RESULTS: At 12 months, the dietary calcium to protein ratio in the CAL group (32.3 ± 15.6 mg/g) was greater than the CTL group (15.2 ± 7.5 mg/g). There were no differences from baseline to POST between groups for changes in body weight (CAL = 0.1 ± 3.0 kg; CTL = 0.0 ± 2.9 kg), %Fat(TB )(CAL = 0.0 ± 2.4%; CTL = 0.5 ± 5.4%), %Fat(AB )(CAL = -0.4 ± 8.7%; CTL = 0.6 ± 8.7%), or fat mass (CAL = 1.3 ± 2.6 kg; CTL = 1.3 ± 2.7 kg). CONCLUSION: These results indicate that increasing the calcium to protein ratio over two-fold by consuming a calcium-fortified beverage for 12 months did not decrease body weight, body fat, or abdominal fat composition in postmenopausal women

Anti-Allergic Cromones Inhibit Histamine and Eicosanoid Release from Activated Human and Murine Mast Cells by Releasing Annexin A1

PMCID: PMC3601088This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited

The effect of starting point placement technique on thoracic transverse process strength: an ex vivo biomechanical study

<p>Abstract</p> <p>Background</p> <p>The use of thoracic pedicle screws in spinal deformity, trauma, and tumor reconstruction is becoming more common. Unsuccessful screw placement may require salvage techniques utilizing transverse process hooks. The effect of different starting point placement techniques on the strength of the transverse process has not previously been reported. The purpose of this paper is to determine the biomechanical properties of the thoracic transverse process following various pedicle screw starting point placement techniques.</p> <p>Methods</p> <p>Forty-seven fresh-frozen human cadaveric thoracic vertebrae from T2 to T9 were disarticulated and matched by bone mineral density (BMD) and transverse process (TP) cross-sectional area. Specimens were randomized to one of four groups: A, control, and three others based on thoracic pedicle screw placement technique; B, straightforward; C, funnel; and D, in-out-in. Initial cortical bone removal for pedicle screw placement was made using a burr at the location on the transverse process or transverse process-laminar junction as published in the original description of each technique. The transverse process was tested measuring load-to-failure simulating a hook in compression mode. Analysis of covariance and Pearson correlation coefficients were used to examine the data.</p> <p>Results</p> <p>Technique was a significant predictor of load-to-failure (<it>P </it>= 0.0007). The least squares mean (LS mean) load-to-failure of group A (control) was 377 N, group B (straightforward) 355 N, group C (funnel) 229 N, and group D (in-out-in) 301 N. Significant differences were noted between groups A and C, A and D, B and C, and C and D. BMD (0.925 g/cm²[range, 0.624-1.301 g/cm²]) was also a significant predictor of load-to-failure, for all specimens grouped together (<it>P </it>< 0.0001) and for each technique (<it>P <</it>0.05). Level and side tested were not found to significantly correlate with load-to-failure.</p> <p>Conclusions</p> <p>The residual coronal plane compressive strength of the thoracic transverse process is dependent upon the screw starting point placement technique. The funnel technique significantly weakens transverse processes as compared to the straightforward technique, which does not significantly weaken the transverse process. It is also dependent upon bone mineral density, and low failure loads even in some control specimens suggest limited usefulness of the transverse process for axial compression loading in the osteoporotic thoracic spine.</p

Qualitative and Quantitative Detection of Chlamydophila pneumoniae DNA in Cerebrospinal Fluid from Multiple Sclerosis Patients and Controls

A standardized molecular test for the detection of Chlamydophila pneumoniae DNA in cerebrospinal fluid (CSF) would assist the further assessment of the association of C. pneumoniae with multiple sclerosis (MS). We developed and validated a qualitative colorimetric microtiter plate-based PCR assay (PCR-EIA) and a real-time quantitative PCR assay (TaqMan) for detection of C. pneumoniae DNA in CSF specimens from MS patients and controls. Compared to a touchdown nested-PCR assay, the sensitivity, specificity, and concordance of the PCR-EIA assay were 88.5%, 93.2%, and 90.5%, respectively, on a total of 137 CSF specimens. PCR-EIA presented a significantly higher sensitivity in MS patients (p = 0.008) and a higher specificity in other neurological diseases (p = 0.018). Test reproducibility of the PCR-EIA assay was statistically related to the volumes of extract DNA included in the test (p = 0.033); a high volume, which was equivalent to 100 µl of CSF per reaction, yielded a concordance of 96.8% between two medical technologists running the test at different times. The TaqMan quantitative PCR assay detected 26 of 63 (41.3%) of positive CSF specimens that tested positive by both PCR-EIA and nested-PCR qualitative assays. None of the CSF specimens that were negative by the two qualitative PCR methods were detected by the TaqMan quantitative PCR. The PCR-EIA assay detected a minimum of 25 copies/ml C. pneumoniae DNA in plasmid-spiked CSF, which was at least 10 times more sensitive than TaqMan. These data indicated that the PCR-EIA assay possessed a sensitivity that was equal to the nested-PCR procedures for the detection of C. pneumoniae DNA in CSF. The TaqMan system may not be sensitive enough for diagnostic purposes due to the low C. pneumoniae copies existing in the majority of CSF specimens from MS patients

Predictors of esophageal varices in patients with HBV-related cirrhosis: a retrospective study

<p>Abstract</p> <p>Background</p> <p>All patients with liver cirrhosis are recommended to undergo an evaluation of esophageal varices (EV) to assess their risk of bleeding. Predicting the presence of EV through non-invasive means may reduce a large number of unnecessary endoscopies. This study was designed to develop a predictive model for varices in patients with Hepatitis B virus-related cirrhosis.</p> <p>Methods</p> <p>The retrospective analysis was performed in 146 patients with Hepatitis B virus-related cirrhosis. The data were assessed by univariate analysis and a multivariate logistic regression analysis. In addition, the receiver operating characteristic curves were also applied to calculate and compare the accuracy of the model and other single parameters for the diagnosis of esophageal varices.</p> <p>Results</p> <p>We found the prevalence of EV in patients with Hepatitis B virus-related cirrhosis to be 74.7%. In addition, platelet count, spleen width, portal vein diameter and platelet count/spleen width ratio were significantly associated with the presence of esophageal varices on univariate analysis. A multivariate analysis revealed that only the spleen width and portal vein diameter were independent risk factors. The area under the receiver operating characteristic curve of regression function (RF) model, which was composed of the spleen width and portal vein diameter, was higher than that of the platelet count. With a cut-off value of 0.3631, the RF model had an excellent sensitivity of 87.2% and an acceptable specificity of 59.5% with an overall accuracy of 80.1%.</p> <p>Conclusion</p> <p>Our data suggest that portal vein diameter and spleen width rather than platelet count may predict the presence of varices in patients with Hepatitis B virus-related cirrhosis, and that the RF model may help physicians to identify patients who would most likely benefit from screenings for EV.</p

The role of mutations in core protein of hepatitis B virus in liver fibrosis

The core protein of hepatitis B virus encompasses B- and T-cell immunodominant epitopes and subdivided into two domains: the N-terminal and the functional C-terminal consisted phosphorylation sites. Mutations of the core gene may change the conformation of the core protein or cause alteration of important epitopes in the host immune response. In this study twenty nine men (mean age 40 ± 9 years old) with chronic hepatitis B were recruited for direct sequencing of the core gene. Serum ALT and HBV DNA level were measured at the time of liver biopsy. The effects of core protein mutations on patients' characteristics and subsequently mutations in B cell, T helper and cytotoxic T lymphocyte (CTL) epitopes and also C-terminal domain of core protein on the activity of liver disease was evaluated. Liver fibrosis was significantly increased in patients with core protein mutation (1.0 ± 0.8 vs 1.9 ± 1.4 for mean stage of fibrosis P = 0.05). Mutations in CTL epitopes and in phosphorylation sites of C-terminal domain of core protein also were associated with higher liver fibrosis (P = 0.003 and P = 0.04; Fisher's exact test for both). Patients with mutation in C-terminal domain had higher serum ALT (62 ± 17 vs 36 ± 12 IU/l, p = 0.02). Patients with mutations in B cell and T helper epitopes did not show significant difference in the clinical features. Our data suggests that core protein mutations in CTL epitopes and C-terminal domain accompanied with higher stage of liver fibrosis may be due to alterations in the function of core protein