The LHC Discovery Potential of a Leptophilic Higgs

In this work, we examine a two-Higgs-doublet extension of the Standard Model in which one Higgs doublet is responsible for giving mass to both up- and down-type quarks, while a separate doublet is responsible for giving mass to leptons. We examine both the theoretical and experimental constraints on the model and show that large regions of parameter space are allowed by these constraints in which the effective couplings between the lightest neutral Higgs scalar and the Standard-Model leptons are substantially enhanced. We investigate the collider phenomenology of such a "leptophilic" two-Higgs-doublet model and show that in cases where the low-energy spectrum contains only one light, CP-even scalar, a variety of collider processes essentially irrelevant for the discovery of a Standard Model Higgs boson (specifically those in which the Higgs boson decays directly into a charged-lepton pair) can contribute significantly to the discovery potential of a light-to-intermediate-mass (m_h < 140 GeV) Higgs boson at the LHC.Comment: 25 pages, LaVTeX, 11 figures, 1 tabl

Modification of vortex structures in fishways by cylinder adjunction

The improvement of devices that allow the upstream migration of fishes through engineering constructions or natural obstructions in rivers is now a real priority to maintain the biodiversity. Vertical slot fishways are commonly used and are very effective in ensuring unhindered passage of the species of large size fishes [1]. The flows within these hydraulic structures are turbulent [2] and present unsteady vortex dynamic in relation to the geometric parameters of the pools (slopes, flow discharges and pool widths). The modes of locomotion of the fish depend to the species and are the object of several recent studies [3]. The fishes use the fluid motion generated inside the pools to the propulsion and to move easily upstream in the fishway. Nerveless the species with small sizes have some difficulties to upstream migrate because the kinematic energy and the velocity are too large for them. An experimental study is undertaken to characterize the turbulent flow for various configurations of vertical slot fishways and to determine how their characteristics might be modified in order to facilitate the passage of small species. Particle Image Velocimetry is achieved to analyze the effects of vertical cylinders within the pools on the dimensions of recirculation zones and the turbulence intensity. Mean velocity and fluctuation measurements inside a pool with and without cylinder are compared. The unsteady behaviours and the vortex flapping are examined

Influence des paramètres géométriques sur l’écoulement turbulent dans une passe à poissons à fentes verticales

Les passes à fentes verticales sont des structures hydrauliques permettant aux poissons de franchir des obstacles lors de leur migration vers l’amont des cours d’eau. Une étude expérimentale a été entreprise sur un modèle réduit pour caractériser les écoulements turbulents dans différentes configurations de passes à fentes verticales. Ce travail doit permettre de déterminer par la suite de quelle manière ces dispositifs peuvent être modifiés afin de faciliter le passage des petites espèces qui, aujourd’hui, ont des difficultés à franchir les bassins. Les caractéristiques de l’écoulement moyen et de la turbulence ont été étudiées par PIV et ADV pour plusieurs pentes de canal, plusieurs débits d’écoulement et largeurs de bassins. Les mesures ont permis de mettre en évidence l’influence des différents paramètres géométriques et hydrauliques sur la structure même des écoulements turbulents

An experimental study of turbulent flow in vertical slot fishways

The vertical slot fishways are hydraulic structures that allow the upstream migration of fishes through engineering constructions or natural obstructions in rivers. This type of pool fish pass is generally very effective in ensuring passage of the target species, particularly diadromous species. However, visual observations have shown that certain small species may be trapped in the large recirculation zones and seem to have difficulty in rapidly passing through very large pools. An experimental study was undertaken to characterize the turbulent flow for various configurations of vertical slot fishways and to determine how their characteristics might be modified in order to facilitate the passage of small species. The characteristics of mean flow and turbulence were studied by PIV and visualizations for several different slopes, flow discharges and pool widths. The results showed that the flow pattern always takes one of two topology models depending on the ratio length/width of the pool. In order to study the extent to which the dimensions of recirculation zones can be reduced, the effect of the insertion of vertical cylinders within the pools was visualized

Determining the CP parity of Higgs bosons at the LHC in the τ\tau to 1-prong decay channels

We propose a method for determining the CP nature of a neutral Higgs boson or spin-zero resonance $\phi$ at the CERN Large Hadron Collider (LHC) in its $\phi\to\tau^{-}\tau^{+}$ decay channel. The method can be applied to any 1-prong $\tau$-decay mode, which comprise the majority of the $\tau$-lepton decays. The proposed observables allow to discriminate between pure scalar and pseudoscalar Higgs-boson states and/or between a CP-conserving and CP-violating Higgs sector. We show for the decays $\tau\to\pi\nu_{\tau}$ that the method maintains its discriminating power when measurement uncertainties are taken into account. The method will be applicable also at a future linear $e^{+}e^{-}$ collider.Comment: Latex, 15 pages, 6 figure

Energy Linearity and Resolution of the ATLAS Electromagnetic Barrel Calorimeter in an Electron Test-Beam

A module of the ATLAS electromagnetic barrel liquid argon calorimeter was exposed to the CERN electron test-beam at the H8 beam line upgraded for precision momentum measurement. The available energies of the electron beam ranged from 10 to 245 GeV. The electron beam impinged at one point corresponding to a pseudo-rapidity of eta=0.687 and an azimuthal angle of phi=0.28 in the ATLAS coordinate system. A detailed study of several effects biasing the electron energy measurement allowed an energy reconstruction procedure to be developed that ensures a good linearity and a good resolution. Use is made of detailed Monte Carlo simulations based on Geant which describe the longitudinal and transverse shower profiles as well as the energy distributions. For electron energies between 15 GeV and 180 GeV the deviation of the measured incident electron energy over the beam energy is within 0.1%. The systematic uncertainty of the measurement is about 0.1% at low energies and negligible at high energies. The energy resolution is found to be about 10% sqrt(E) for the sampling term and about 0.2% for the local constant term

2004 ATLAS Combined Testbeam : Computation and Validation of the Electronic Calibration Constants for the Electromagnetic Calorimeter

From July to November 2004, a full slice of the ATLAS barrel detector was studied in testbeam. A complete electromagnetic barrel module was used, read by the final electronics and operated by ATLAS TDAQ software. This note describes in details the electronic calibration procedure and the cell energy reconstruction: each step of the procedure and its associated software is explicitly described. The general calibration procedure is very similar to the one applied in previous barrel and endcap standalone testbeams. Emphasis is put on tools developed in the context of the combined testbeam which can be used for commissioning and operation of the calorimeters in ATLAS. Many validation studies were performed on each calibration constant. Previously unobserved effects such as the FEB temperature dependence of some constants were observed. Overall, the calibration performances are at the expected level

Search for squarks and gluinos with the ATLAS detector in final states with jets and missing transverse momentum using √s=8 TeV proton-proton collision data

A search for squarks and gluinos in final states containing high-p T jets, missing transverse momentum and no electrons or muons is presented. The data were recorded in 2012 by the ATLAS experiment in s√=8 TeV proton-proton collisions at the Large Hadron Collider, with a total integrated luminosity of 20.3 fb−1. Results are interpreted in a variety of simplified and specific supersymmetry-breaking models assuming that R-parity is conserved and that the lightest neutralino is the lightest supersymmetric particle. An exclusion limit at the 95% confidence level on the mass of the gluino is set at 1330 GeV for a simplified model incorporating only a gluino and the lightest neutralino. For a simplified model involving the strong production of first- and second-generation squarks, squark masses below 850 GeV (440 GeV) are excluded for a massless lightest neutralino, assuming mass degenerate (single light-flavour) squarks. In mSUGRA/CMSSM models with tan β = 30, A 0 = −2m 0 and μ > 0, squarks and gluinos of equal mass are excluded for masses below 1700 GeV. Additional limits are set for non-universal Higgs mass models with gaugino mediation and for simplified models involving the pair production of gluinos, each decaying to a top squark and a top quark, with the top squark decaying to a charm quark and a neutralino. These limits extend the region of supersymmetric parameter space excluded by previous searches with the ATLAS detector

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results