Measurement of nuclear modification factors of gamma(1S)), gamma(2S), and gamma(3S) mesons in PbPb collisions at root s(NN)=5.02 TeV

The cross sections for ϒ(1S), ϒ(2S), and ϒ(3S) production in lead-lead (PbPb) and proton-proton (pp) collisions at √sNN = 5.02 TeV have been measured using the CMS detector at the LHC. The nuclear modification factors, RAA, derived from the PbPb-to-pp ratio of yields for each state, are studied as functions of meson rapidity and transverse momentum, as well as PbPb collision centrality. The yields of all three states are found to be significantly suppressed, and compatible with a sequential ordering of the suppression, RAA(ϒ(1S)) > RAA(ϒ(2S)) > RAA(ϒ(3S)). The suppression of ϒ(1S) is larger than that seen at √sNN = 2.76 TeV, although the two are compatible within uncertainties. The upper limit on the RAA of ϒ(3S) integrated over pT, rapidity and centrality is 0.096 at 95% confidence level, which is the strongest suppression observed for a quarkonium state in heavy ion collisions to date. © 2019 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). Funded by SCOAP3.Peer reviewe

Electroweak production of two jets in association with a Z boson in proton-proton collisions root s =13 TeV

A measurement of the electroweak (EW) production of two jets in association with a Z boson in proton-proton collisions at root s = 13 TeV is presented, based on data recorded in 2016 by the CMS experiment at the LHC corresponding to an integrated luminosity of 35.9 fb(-1). The measurement is performed in the lljj final state with l including electrons and muons, and the jets j corresponding to the quarks produced in the hard interaction. The measured cross section in a kinematic region defined by invariant masses m(ll) > 50 GeV, m(jj) > 120 GeV, and transverse momenta P-Tj > 25 GeV is sigma(EW) (lljj) = 534 +/- 20 (stat) fb (syst) fb, in agreement with leading-order standard model predictions. The final state is also used to perform a search for anomalous trilinear gauge couplings. No evidence is found and limits on anomalous trilinear gauge couplings associated with dimension-six operators are given in the framework of an effective field theory. The corresponding 95% confidence level intervals are -2.6 <cwww/Lambda(2) <2.6 TeV-2 and -8.4 <cw/Lambda(2) <10.1 TeV-2. The additional jet activity of events in a signal-enriched region is also studied, and the measurements are in agreement with predictions.Peer reviewe

Bose-Einstein correlations of charged hadrons in proton-proton collisions at s\sqrt s = 13 TeV

Bose-Einstein correlations of charged hadrons are measured over a broad multiplicity range, from a few particles up to about 250 reconstructed charged hadrons in proton-proton collisions at $\sqrt{s}$ = 13 TeV. The results are based on data collected using the CMS detector at the LHC during runs with a special low-pileup configuration. Three analysis techniques with different degrees of dependence on simulations are used to remove the non-Bose-Einstein background from the correlation functions. All three methods give consistent results. The measured lengths of homogeneity are studied as functions of particle multiplicity as well as average pair transverse momentum and mass. The results are compared with data from both CMS and ATLAS at $\sqrt{s}$ = 7 TeV, as well as with theoretical predictions.[graphic not available: see fulltext]Bose-Einstein correlations of charged hadrons are measured over a broad multiplicity range, from a few particles up to about 250 reconstructed charged hadrons in proton-proton collisions at $\sqrt{s} =$ 13 TeV. The results are based on data collected using the CMS detector at the LHC during runs with a special low-pileup configuration. Three analysis techniques with different degrees of dependence on simulations are used to remove the non-Bose-Einstein background from the correlation functions. All three methods give consistent results. The measured lengths of homogeneity are studied as functions of particle multiplicity as well as average pair transverse momentum and mass. The results are compared with data from both CMS and ATLAS at $\sqrt{s} =$ 7 TeV, as well as with theoretical predictions

Search for an L-mu - L-tau gauge boson using Z -> 4 mu events in proton-proton collisions at root s=13 TeV

A search for a narrow Z' gauge boson with a mass between 5 and 70 GeV resulting from an L-mu - L-tau U (1) local gauge symmetry is reported. Theories that predict such a particle have been proposed as an explanation of various experimental discrepancies, including the lack of a dark matter signal in direct-detection experiments, tension in the measurement of the anomalous magnetic moment of the muon, and reports of possible lepton flavor universality violation in B meson decays. A data sample of proton-proton collisions at a center-of-mass energy of 13 TeV is used, corresponding to an integrated luminosity of 77.3 fb(-1) recorded in 2016 and 2017 by the CMS detector at the LHC. Events containing four muons with an invariant mass near the standard model Z boson mass are analyzed, and the selection is further optimized to be sensitive to the events that may contain Z -> Z'mu mu -> 4 mu decays. The event yields are consistent with the standard model predictions. Upper limits of 10(-8)-10(-7) at 95% confidence level are set on the product of branching fractions B(Z -> Z'mu mu)B(Z' -> mu mu), depending on the Z' mass, which excludes a Z' boson coupling strength to muons above 0.004-0.3. These are the first dedicated limits on L-mu - L-tau models at the LHC and result in a significant increase in the excluded model parameter space. The results of this search may also be used to constrain the coupling strength of any light Z' gauge boson to muons. (C) 2019 The Author(s). Published by Elsevier B.V.Peer reviewe

Azimuthal separation in nearly back-to-back jet topologies in inclusive 2-and 3-jet events in pp collisions at root s=13TeV

A measurement for inclusive 2- and 3-jet events of the azimuthal correlation between the two jets with the largest transverse momenta, Delta phi(12), is presented. The measurement considers events where the two leading jets are nearly collinear ("back-to-back") in the transverse plane and is performed for several ranges of the leading jet transverse momentum. Proton-proton collision data collected with the CMS experiment at a center-of-mass energy of 13 TeV and corresponding to an integrated luminosity of 35.9 fb(-1) are used. Predictions based on calculations using matrix elements at leading-order and next-to-leading-order accuracy in perturbative quantum chromodynamics supplemented with leading-log parton showers and hadronization are generally in agreement with themeasurements. Discrepancies between the measurement and theoretical predictions are as large as 15%, mainly in the region 177 degrees <Delta phi(12) <180 degrees. The 2- and 3-jet measurements are not simultaneously described by any of models.Peer reviewe

Studies of Beauty Suppression via Nonprompt D-0 Mesons in Pb-Pb Collisions at root s(NN)=5.02 TeV

The transverse momentum spectra of D-0 mesons from b hadron decays are measured at midrapidity (vertical bar y vertical bar D-0 yield is found to be suppressed in the measured p(T) range from 2 to 100 GeV/c as compared to pp collisions. The suppression is weaker than that of prompt D-0 mesons and charged hadrons for p(T) around 10 GeV/c. While theoretical calculations incorporating partonic energy loss in the quark-gluon plasma can successfully describe the measured B -> D-0 suppression at higher p(T), the data show an indication of larger suppression than the model predictions in the range of 2 <p(T) <5 GeV/c.Peer reviewe

Observation of the χb1(3P)\chi_{b1}(3P) and χb2(3P)\chi_{b2}(3P) and measurement of their masses

The $\chi_{b1}(3P)$ and $\chi_{b2}(3P)$ states are observed through their $\gamma(3S)_\gamma$ decays, using an event sample of proton-proton collisions collected by the CMS experiment at the CERN LHC. The data were collected at a center-of-mass energy of 13 TeV and correspond to an integrated luminosity of $80.0  fb^{−1}$. The$\gamma(3S)$ mesons are identified through their dimuon decay channel, while the low-energy photons are detected after converting to $e^+e ^−$ pairs in the silicon tracker, leading to a $\chi_{b1}(3P)$ mass resolution of 2.2 MeV. This is the first time that the J=1 and 2 states are well resolved and their masses individually measured: $10513.42±0.41(stat)±0.18(syst)  MeV$ and $10524.02±0.57(stat)±0.18(syst)  MeV$; they are determined with respect to the world-average value of the $\gamma(3S)$ mass, which has an uncertainty of 0.5 MeV. The mass splitting is measured to be $10.60±0.64(stat)±0.17(syst)  MeV$

Discrete cosine transform implementation in VHDL

Several different hardware structures for Fast Fourier Transform (FFT) are discussed in this thesis. VHDL was used in providing a simulation. Various costs and performance comparisons of different FFT structures are revealed. The FFT system leads to a design of Discrete Cosine Transform (DCT). VHDL allows the hierarchical description of a system in structural and behavioral description. In the structural description, a component is described in terms of an interconnection of more primitive components. However, in the behavioral domain, a component is described by defining its inputoutput response in terms of a procedure. In this thesis, the lowest hierarchy level is chip-level. In modeling of the floating point unit AMD29325 behavior, several basic functions or procedures are involved. A number of AMD29325 chips were used in the different structures of the FFT butterfly. The full pipeline structure of the FFT butterfly, controller, and address sequence generator are simulated in VHDL. Finally, two methods of implementation of the DCT system are discussed.http://archive.org/details/discretecosinetr1094527602Captain, Republic of China (Taiwan) ArmyApproved for public release; distribution is unlimited

Effect of Carbon Ash Content on the Thermal and Combustion Properties of Waste Wood Particle / Recycled Polypropylene Composites

This study effect of carbon ash content on the thermal stability and combustion behavior of waste wood particle / recycled polypropylene composites was investigated using TGA, DTG, LOI and cone calorimeter. The TGA shows that, as carbon ash content increases, the thermal stability of composites increases, while the residual weight significantly increases, with the residual weight rate of waste wood particle / recycled polypropylene composites increases from 13.97% to 41.02% at 800 ℃ According to cone calorimeter results, in the 50 kW/M2 thermal flow, when carbon ash adding to 70%, peak heat release rate and total heat release quantity, decreases by 68% and 52%, respectively. The LOI of waste wood particle / recycled polypropylene composites improves by about 34%, Conforming UL-94 flammability standard, V-0 rating. The residual weight rate increases by 202.8%, which the significant role of carbon ash in flame retardant