QTL mapping of soybean cyst nematode race 9: a generalized linear modeling approach

The Female Index (FI) is a relative measure of host suitability of a soybean line for a particular nematode population and often shows a non-normal distribution. Moreover, most quantitative trait loci (QTL) mapping methods assume that the phenotype follows a normal distribution such as composite interval mapping (CIM). Therefore, a generalized linear modeling (GLM) approach was employed to map QTL for resistance to race 9 of the soybean cyst nematode (SCN) using a total of 83 simple sequence repeat markers (SSR). Two GLM models were tested: model 1, where the FI was treated as a continuous variable, assuming a Gamma distribution with a logarithmic link function; and model 2, where the FI was treated as a categorical trait in a five-item hierarchy, assuming a multinomial distribution with a cumulative logit link function. The FI data of 108 recombinant inbred lines (RIL) confirmed the non-normal distribution for race 9 of the SCN (Shapiro-Wilk?s w=0.86, P<0.0001, skewness=1.52 and kurtosis=2.93). Eight RIL were confirmed to be resistant (FI≤10), and 23 to be highly susceptible (FI≥100). Both GLM models identified one QTL for SCN on the molecular linkage group G, between the markers Satt275 and Satt038 at 48.4 centiMorgans (P=0.017 and 0.033, for models 1 and 2, respectively). Additionally, these results were also compared with the CIM and Bayesian interval mapping (BIM) methods, assuming experimental data with a non-normal response, to determine the robustness and statistical power of these two methods for mapping QTLs. The results make clear that generalized linear modeling approach can be used as an efficient method to map QTLs in a continuous trait with a non-Gaussian distribution. CIM and BIM were robust enough for a reliable mapping of QTLs underlying nonnormally distributed data.Fil: Arriagada, Osvin. Universidad de Talca; ChileFil: Ferreira, Marcia F. S.. Universidade Federal Do Espirito Santo; BrasilFil: Cervigni, Gerardo Domingo Lucio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Rosario. Centro de Estudios Fotosintéticos y Bioquímicos (i); ArgentinaFil: Schuster, Ivan. Central Cooperative for Agricultural Research; BrasilFil: Scapim, Carlos A.. Universidade Estadual de Maringá; BrasilFil: Mora, Freddy. Universidad de Talca; Chil

Optimisation of UV irradiation as a binding site conserving method for crosslinking collagen-based scaffolds.

Short wavelength (λ = 254 nm) UV irradiation was evaluated over a range of intensities (0.06 to 0.96 J/cm(2)) as a means of cross-linking collagen- and gelatin-based scaffolds, to tailor their material characteristics whilst retaining biological functionality. Zero-link carbodiimide treatments are commonly applied to collagen-based materials, forming cross-links from carboxylate anions (for example the acidic E of GFOGER) that are an essential part of integrin binding sites on collagen. Cross-linking these amino acids therefore disrupts the bioactivity of collagen. In contrast, UV irradiation forms bonds from less important aromatic tyrosine and phenylalanine residues. We therefore hypothesised that UV cross-linking would not compromise collagen cell reactivity. Here, highly porous (~99 %) isotropic, collagen-based scaffolds were produced via ice-templating. A series of scaffolds (pore diameters ranging from 130-260 μm) with ascending stability in water was made from gelatin, two different sources of collagen I, or blends of these materials. Glucose, known to aid UV crosslinking of collagen, was added to some lower-stability formulations. These scaffolds were exposed to different doses of UV irradiation, and the scaffold morphology, dissolution stability in water, resistance to compression and cell reactivity was assessed. Stabilisation in aqueous media varied with both the nature of the collagen-based material employed and the UV intensity. Scaffolds made from the most stable materials showed the greatest stability after irradiation, although the levels of cross-linking in all cases were relatively low. Scaffolds made from pure collagen from the two different sources showed different optimum levels of irradiation, suggesting altered balance between stabilisation from cross-linking and destabilisation from denaturation. The introduction of glucose into the scaffold enhanced the efficacy of UV cross-linking. Finally, as hypothesized, cell attachment, spreading and proliferation on collagen materials were unaffected by UV cross-linking. UV irradiation may therefore be used to provide relatively low level cross-linking of collagen without loss of biological functionality.The authors would like to thank the British Heart Foundation (Grants NH/11/1/28922 and RG/15/4/31268), The Welcome Trust (Grant 094470/Z/10/Z), the ERC Advanced Grant 320598 3D-E and EPSRC Doctoral Training Account for providing financial support for this project. D. V. Bax is funded by the Peoples Programme of the EU 7th Framework Programme (RAE no: PIIF-GA-2013-624904) and also supported by an EPSRC IKC Proof of Concept Award.This is the final version of the article. It was first available from Springer via http://dx.doi.org/10.1007/s10856-015-5627-

Living Dangerously with Low-Energy Supersymmetry

We stress that the lack of direct evidence for supersymmetry forces the soft mass parameters to lie very close to the critical line separating the broken and unbroken phases of the electroweak gauge symmetry. We argue that the level of criticality, or fine-tuning, that is needed to escape the present collider bounds can be quantitatively accounted for by assuming that the overall scale of the soft terms is an environmental quantity. Under fairly general assumptions, vacuum-selection considerations force a little hierarchy in the ratio between m_Z^2 and the supersymmetric particle square masses, with a most probable value equal to a one-loop factor.Comment: 37 pages, 5 figure

Topological reversibility and causality in feed-forward networks

Systems whose organization displays causal asymmetry constraints, from evolutionary trees to river basins or transport networks, can be often described in terms of directed paths (causal flows) on a discrete state space. Such a set of paths defines a feed-forward, acyclic network. A key problem associated with these systems involves characterizing their intrinsic degree of path reversibility: given an end node in the graph, what is the uncertainty of recovering the process backwards until the origin? Here we propose a novel concept, \textit{topological reversibility}, which rigorously weigths such uncertainty in path dependency quantified as the minimum amount of information required to successfully revert a causal path. Within the proposed framework we also analytically characterize limit cases for both topologically reversible and maximally entropic structures. The relevance of these measures within the context of evolutionary dynamics is highlighted.Comment: 9 pages, 3 figure

The INT Search for Metal-Poor Stars. Spectroscopic Observations and Classification via Artificial Neural Networks

With the dual aims of enlarging the list of extremely metal-poor stars identified in the Galaxy, and boosting the numbers of moderately metal-deficient stars in directions that sample the rotational properties of the thick disk, we have used the 2.5m Isaac Newton Telescope and the Intermediate Dispersion Spectrograph to carry out a survey of brighter (primarily northern hemisphere) metal-poor candidates selected from the HK objective-prism/interference-filter survey of Beers and collaborators. Over the course of only three observing runs (15 nights) we have obtained medium-resolution (resolving power ~ 2000) spectra for 1203 objects (V ~ 11-15). Spectral absorption-line indices and radial velocities have been measured for all of the candidates. Metallicities, quantified by [Fe/H], and intrinsic (B-V)o colors have been estimated for 731 stars with effective temperatures cooler than roughly 6500 K, making use of artificial neural networks (ANNs), trained with spectral indices. We show that this method performs as well as a previously explored Ca II K calibration technique, yet it presents some practical advantages. Among the candidates in our sample, we identify 195 stars with [Fe/H] <= -1.0, 67 stars with [Fe/H] <= -2.0, and 12 new stars with [Fe/H] <= -3.0. Although the EFECTIVE YIELD of metal-poor stars in our sample is not as large as previous HK survey follow-up programs, the rate of discovery per unit of telescope time is quite high.Comment: 27 pages (including 13 figures) + 6 tables (20 pages); uses aastex, lscape and graphicx; to appear in A

Selecting the correct cellular model for assessing of the biological response of collagen-based biomaterials.

UNLABELLED: Accurate evaluation of the biological performance of biomaterials requires the correct assessment of their native-like cell ligation properties. However, cell attachment studies often overlook the details of the substrate-cell binding mechanisms, be they integrin-mediated or non-specific, and ignore the class- and species-specificities of the cell adhesion receptor involved. In this work we have used different collagen (Col) substrates (fibrillar collagens I, II and III and network-forming Col IV), containing different affinity cell-recognition motifs, to establish the influence of the receptor identity and species-specificity on collagen-cell interactive properties. Receptor expression was varied by using cells of different origin, or transfecting collagen-binding integrins into integrin-null cells. These include mouse C2C12 myoblasts transfected with human α1, α2, α10 or α11; human fibrosarcoma HT1080 cells which constitutively express only human α2β1, and rat glioma Rugli cells, with only rat α1β1. Using these lines, the nature of integrin binding sites was studied in order to delineate the bioactivity of different collagen substrates. Integrin ligation was studied on collagen coatings alongside synthetic (GFOGER/GLOGEN) and Toolkit (Col II-28/Col III-7) triple-helical peptides to evaluate (1) their affinity towards different integrins and (2) to confirm the activity of the inserted integrin in the transfected cells. Thin films of dermal and tendon Col I were used to evaluate the influence of the carbodiimide (EDC)-based treatment on the cellular response on Col of different origin. The results showed that the binding properties of transfected C2C12 cells to collagens depend on the identity of inserted integrin. Similar ligation characteristics were observed using α1+ and α10+ cells, but these were distinct from the similar binding features of α2+ and α11+ cells. Recombinant human and rat-α1 I domain binding to collagens and peptides correlated with the cell adhesion results, showing receptor class- and species-specificities. The understanding of the physiologically relevant cell anchorage characteristics of bio-constructs may assist in the selection of (1) the optimum collagen source for cellular supports and (2) the correct cellular model for their biological assessment. This, in turn, may allow reliable prediction of the biological performance of bio-scaffolds in vivo for specific TE applications. STATEMENT OF SIGNIFICANCE: Integrins play a vital role in cellular responses to environmental cues during early-stage cell-substrate interaction. We describe physiologically relevant cell anchorage to collagen substrates that present different affinity cell-recognition motifs, to provide experimental tools to assist in understanding integrin binding. Using different cell types and recombinant integrin α1-I-domains, we found that cellular response was highly dependent on collagen type, origin and EDC-crosslinking status, as well as on the integrin class and species of origin. This comprehensive study establishes selectivity amongst the four collagen-binding integrins and species-specific properties that together may influence choice of cell type and receptor in different experimental settings. This work offers key guidance in selecting of the correct cellular model for the biological testing of collagen-based biomaterials

Risk behaviors of 15–21 year olds in Mexico lead to a high prevalence of sexually transmitted infections: results of a survey in disadvantaged urban areas

BACKGROUND: Due to the fact that adolescents are more likely to participate in high-risk behaviors, this sector of the population is particularly vulnerable to contracting sexually transmitted infections (STIs) and resultant health problems. METHODS: A survey was carried out among adolescents from poor homes in 204 small-urban areas of Mexico. Information was collected in relation to risk behaviors and socio-economic environment. A sub-group of the participants also provided blood and urine samples which were analyzed to detect sexually transmitted infections. RESULTS: The presence of Chlamydia was detected in nearly 8% of participants who had stated that they were sexually active (18%) and approximately 12% were positive for herpes type 2-specific antibodies. For both, a greater proportion of girls resulted positive compared to boys. The presence of these biological outcomes of sexual risk behavior was associated with other risk behaviors (smoking), but not with self-reported indicators of protected sex (reported use of condom during most recent sexual activity). CONCLUSION: The results presented in this study show a startlingly high prevalence of HSV-2 among sexually active Mexican adolescents in poor urban areas, suggesting that this group has participated to a great extent in risky sexual practices. The relationships between socioeconomic environment and adolescent risk behavior need to be better understood if we are to design preventive interventions that modify the determinants of risk behaviors

A multi-decade record of high quality fCO2 data in version 3 of the Surface Ocean CO2 Atlas (SOCAT)

The Surface Ocean CO2 Atlas (SOCAT) is a synthesis of quality-controlled fCO2 (fugacity of carbon dioxide) values for the global surface oceans and coastal seas with regular updates. Version 3 of SOCAT has 14.7 million fCO2 values from 3646 data sets covering the years 1957 to 2014. This latest version has an additional 4.6 million fCO2 values relative to version 2 and extends the record from 2011 to 2014. Version 3 also significantly increases the data availability for 2005 to 2013. SOCAT has an average of approximately 1.2 million surface water fCO2 values per year for the years 2006 to 2012. Quality and documentation of the data has improved. A new feature is the data set quality control (QC) flag of E for data from alternative sensors and platforms. The accuracy of surface water fCO2 has been defined for all data set QC flags. Automated range checking has been carried out for all data sets during their upload into SOCAT. The upgrade of the interactive Data Set Viewer (previously known as the Cruise Data Viewer) allows better interrogation of the SOCAT data collection and rapid creation of high-quality figures for scientific presentations. Automated data upload has been launched for version 4 and will enable more frequent SOCAT releases in the future. High-profile scientific applications of SOCAT include quantification of the ocean sink for atmospheric carbon dioxide and its long-term variation, detection of ocean acidification, as well as evaluation of coupled-climate and ocean-only biogeochemical models. Users of SOCAT data products are urged to acknowledge the contribution of data providers, as stated in the SOCAT Fair Data Use Statement. This ESSD (Earth System Science Data) “living data” publication documents the methods and data sets used for the assembly of this new version of the SOCAT data collection and compares these with those used for earlier versions of the data collection (Pfeil et al., 2013; Sabine et al., 2013; Bakker et al., 2014). Individual data set files, included in the synthesis product, can be downloaded here: doi:10.1594/PANGAEA.849770. The gridded products are available here: doi:10.3334/CDIAC/OTG.SOCAT_V3_GRID

The Fourteenth Data Release of the Sloan Digital Sky Survey: First Spectroscopic Data from the extended Baryon Oscillation Spectroscopic Survey and from the second phase of the Apache Point Observatory Galactic Evolution Experiment

The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) has been in operation since July 2014. This paper describes the second data release from this phase, and the fourteenth from SDSS overall (making this, Data Release Fourteen or DR14). This release makes public data taken by SDSS-IV in its first two years of operation (July 2014-2016). Like all previous SDSS releases, DR14 is cumulative, including the most recent reductions and calibrations of all data taken by SDSS since the first phase began operations in 2000. New in DR14 is the first public release of data from the extended Baryon Oscillation Spectroscopic Survey (eBOSS); the first data from the second phase of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE-2), including stellar parameter estimates from an innovative data driven machine learning algorithm known as "The Cannon"; and almost twice as many data cubes from the Mapping Nearby Galaxies at APO (MaNGA) survey as were in the previous release (N = 2812 in total). This paper describes the location and format of the publicly available data from SDSS-IV surveys. We provide references to the important technical papers describing how these data have been taken (both targeting and observation details) and processed for scientific use. The SDSS website (www.sdss.org) has been updated for this release, and provides links to data downloads, as well as tutorials and examples of data use. SDSS-IV is planning to continue to collect astronomical data until 2020, and will be followed by SDSS-V.Comment: SDSS-IV collaboration alphabetical author data release paper. DR14 happened on 31st July 2017. 19 pages, 5 figures. Accepted by ApJS on 28th Nov 2017 (this is the "post-print" and "post-proofs" version; minor corrections only from v1, and most of errors found in proofs corrected

Diastereoselective Synthesis of C60/Steroid Conjugates

The design and synthesis of fullerene–steroid hybrids by using Prato’s protocol has afforded new fullerene derivatives endowed with epiandrosterone, an important naturally occurring steroid hormone. Since the formation of the pyrrolidine ring resulting from the 1,3-dipolar cyloaddition reaction takes place with generation of a new stereogenic center on the C2 of the five-membered ring, the reaction proceeds with formation of a diastereomeric mixture [compounds 6 and 7 in 70:30 ratio, 8 and 9 in 26:74 ratio (HPLC)] in which the formation of the major diasteroisomers 6 and 9 is consistent with an electrophilic attack of [60]fullerene on the Re face of the azomethine ylide directed by the steroidic unit. The chiroptical properties of these conjugates reveal typical Cotton effects in CD spectra that have been used to assign the absolute configuration of the new fulleropyrrolidines. The electrochemical study of the new compounds reveals the presence of four quasi-reversible reduction waves which are cathodically shifted in comparison with the parent C60, thus ascertaining the proposed structures.Financial support by the Ministerio de Ciencia e Innovación (MINECO) of Spain (CTQ2011-24652, CTQ2011-27253, PIB2010JP-00196, and CSD2007-00010 projects) and CAM (Madrisolar-2) is acknowledged; A.R. thanks UCM for financial support; M.S. is indebted to Programa del Grupo Santander 2012