A Comparative Study of Some Cellular Manufacturing Techniques

Cellular manufacturing (CM) is a concept that involves processing of similar parts on dedicated cluster (or cells) of dissimilar machines or manufacturing processes. This paper concentrated on seven cell formation techniques used in Cellular Manufacturing (CM). The techniques were used to develop cells for matrices from various sizes of parts and machines. By randomly rearranging the sequence of the machines in the reference matrices (cited from published journals), 12 new matrices were developed. This paper also concentrated on performing the treatments for bottleneck, exceptional elements or voids using part subcontracting or machine duplication for the developed cells. The performance of each technique was measured using Grouping Measures (GM), where high percentage of GM indicates that the technique has high machine utilization (MU) and low percentage of exceptional elements (EE). Overall, Bond Energy Algorithm (BEA) was found to be the best cell formation technique

Validating the ISO 9000 Construct of Measurement Instrument Through Application of RASCH Model

There are numerous researches conducted on the issues related to ISO 9001 quality management system. Among the issue is the impact of the ISO 9001 quality management system implementation on the performance of the organization. However the findings from the research appeared as inconclusive. Few literature suggest that the inconclusive result may due to the level of ISO 9000 implementation therefore further research is required. Generally the data collected for these types of researches are through mailed questionnaires and analyzed it using SPSS and SEM. In line with that this study also developed questionnaires correspond to a 5 point Likert to assess the implementation of ISO 9000 in the organization. As a result 231 items are identified within five dimensions. The five dimensions are derived from ISO 9001 and ISO 9004 quality management standards requirement and guidelines. Among the dimensions are management responsibility, resource management, product realization, measurement improvement and innovation and organizational performance. The questionnaires are sent to 78 automotive based companies located in the Northern region of Peninsular Malaysia. 19 questionnaires were returned and used as pilot test to validate and calibrate the instrument. The responds from the organization are tabulated and run in WinSteps software for the purpose of validating and calibrating the instrument by implementing the Rasch ‘quality control' and reduction of items. Not all the outfit items are removed from the instruments, Rasch Model did provide room for the researcher to make decision either to remove or not those outfit items. In this study those outfit items need to be corrected in order to ensure that the instrument is reliable and fit to measure the performance of the organization. As a result 68 items are removed from the questionnaires

Thrombosis, major bleeding, and survival in COVID-19 supported by VV- ECMO in the first vs second wave- multicentre observational study in the UK

BACKGROUND: Bleeding and thrombosis are major complications of veno-venous extracorporeal membrane (VV-ECMO). OBJECTIVES: To assess thrombosis, major bleeding (MB) and 180-day in patients supported by VV-ECMO between first (1st March-31st May 2020) and second (1st June 2020-30th June 2021) waves of the COVID-19 pandemic. PATIENTS/METHODS: Observational study of 309 consecutive patients (≥18years) with severe COVID-19 supported by VV-ECMO in four nationally commissioned ECMO centres, UK. RESULTS: Median age was 48 (19-75)years and 70.6% were male. Probabilities of survival, thrombosis, and MB at 180 days in the overall cohort were 62.5% (193/309), 39.8%(123/309) and 30%(93/309). In multivariate analysis, age >55 years (HR 2.29 [1.33-3.93],p=0.003) and elevated creatinine (HR 1.91 [1.19-3.08],p=0.008) were associated with increased mortality. Corrected for duration of VV-ECMO support, arterial thrombosis alone (HR 3.0 [95% CI1.5-5.9], P= 0.002) or circuit thrombosis alone (HR 3.9 [95% 2.4-6.3], P<0.001), but not venous thrombosis, increased mortality. MB during ECMO had 3-fold risk (95% CI 2.6-5.8, P<0.001) of mortality. The first wave cohort had more males (76.7% vs 64%, p=0.014), higher 180-day survival (71.1% vs 53.3% p=0.003), more venous thrombosis alone (46.4% vs 29.2%, p=0.02) and lower circuit thrombosis (9.2% vs 28.1%, p<0.001). The second wave cohort received more steroids (121/150 [80.6%] vs 86/159 [54.1%], p<0.0001) and Tocilizumab (20/150 [13.3%] vs 4/159 [2.5%] p=0.005). CONCLUSIONS: MB and thrombosis are frequent complications in patients on VV-ECMO and significantly increase mortality. Arterial thrombosis alone or circuit thrombosis alone increased mortality whilst venous thrombosis alone had no effect. MB during ECMO support increased mortality 3.9-fold

Role of the Subunits Interactions in the Conformational Transitions in Adult Human Hemoglobin: an Explicit Solvent Molecular Dynamics Study

Hemoglobin exhibits allosteric structural changes upon ligand binding due to the dynamic interactions between the ligand binding sites, the amino acids residues and some other solutes present under physiological conditions. In the present study, the dynamical and quaternary structural changes occurring in two unligated (deoxy-) T structures, and two fully ligated (oxy-) R, R2 structures of adult human hemoglobin were investigated with molecular dynamics. It is shown that, in the sub-microsecond time scale, there is no marked difference in the global dynamics of the amino acids residues in both the oxy- and the deoxy- forms of the individual structures. In addition, the R, R2 are relatively stable and do not present quaternary conformational changes within the time scale of our simulations while the T structure is dynamically more flexible and exhibited the T\rightarrow R quaternary conformational transition, which is propagated by the relative rotation of the residues at the {\alpha}1{\beta}2 and {\alpha}2{\beta}1 interface.Comment: Reprinted (adapted) with permission from J. Phys. Chem. B DOI:10.1021/jp3022908. Copyright (2012) American Chemical Societ

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30

Evidence for the Higgs-boson Yukawa coupling to tau leptons with the ATLAS detector

Results of a search for H → τ τ decays are presented, based on the full set of proton-proton collision data recorded by the ATLAS experiment at the LHC during 2011 and 2012. The data correspond to integrated luminosities of 4.5 fb−1 and 20.3 fb−1 at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV respectively. All combinations of leptonic (τ → `νν¯ with ` = e, µ) and hadronic (τ → hadrons ν) tau decays are considered. An excess of events over the expected background from other Standard Model processes is found with an observed (expected) significance of 4.5 (3.4) standard deviations. This excess provides evidence for the direct coupling of the recently discovered Higgs boson to fermions. The measured signal strength, normalised to the Standard Model expectation, of µ = 1.43 +0.43 −0.37 is consistent with the predicted Yukawa coupling strength in the Standard Model

Search for squarks and gluinos with the ATLAS detector in final states with jets and missing transverse momentum using √s=8 TeV proton-proton collision data

A search for squarks and gluinos in final states containing high-p T jets, missing transverse momentum and no electrons or muons is presented. The data were recorded in 2012 by the ATLAS experiment in s√=8 TeV proton-proton collisions at the Large Hadron Collider, with a total integrated luminosity of 20.3 fb−1. Results are interpreted in a variety of simplified and specific supersymmetry-breaking models assuming that R-parity is conserved and that the lightest neutralino is the lightest supersymmetric particle. An exclusion limit at the 95% confidence level on the mass of the gluino is set at 1330 GeV for a simplified model incorporating only a gluino and the lightest neutralino. For a simplified model involving the strong production of first- and second-generation squarks, squark masses below 850 GeV (440 GeV) are excluded for a massless lightest neutralino, assuming mass degenerate (single light-flavour) squarks. In mSUGRA/CMSSM models with tan β = 30, A 0 = −2m 0 and μ > 0, squarks and gluinos of equal mass are excluded for masses below 1700 GeV. Additional limits are set for non-universal Higgs mass models with gaugino mediation and for simplified models involving the pair production of gluinos, each decaying to a top squark and a top quark, with the top squark decaying to a charm quark and a neutralino. These limits extend the region of supersymmetric parameter space excluded by previous searches with the ATLAS detector

Measurement of the top pair production cross section in 8 TeV proton-proton collisions using kinematic information in the lepton plus jets final state with ATLAS

A measurement is presented of the $t\bar{t}$ inclusive production cross-section in $pp$ collisions at a center-of-mass energy of $\sqrt{s}=8$ TeV using data collected by the ATLAS detector at the CERN Large Hadron Collider. The measurement was performed in the lepton+jets final state using a data set corresponding to an integrated luminosity of 20.3 fb$^{-1}$. The cross-section was obtained using a likelihood discriminant fit and $b$-jet identification was used to improve the signal-to-background ratio. The inclusive $t\bar{t}$ production cross-section was measured to be $260\pm 1{\textrm{(stat.)}} ^{+22}_{-23} {\textrm{(syst.)}}\pm 8{\textrm{(lumi.)}}\pm 4{\mathrm{(beam)}}$ pb assuming a top-quark mass of 172.5 GeV, in good agreement with the theoretical prediction of $253^{+13}_{-15}$ pb. The $t\bar{t}\to (e,\mu)+{\mathrm{jets}}$ production cross-section in the fiducial region determined by the detector acceptance is also reported.Comment: Published version, 19 pages plus author list (35 pages total), 3 figures, 2 tables, all figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/TOPQ-2013-06

Measurement of the charge asymmetry in dileptonic Decays of top quark pairs in pp collisions at √ s = 7 TeV using the ATLAS detector

A measurement of the top-antitop (tt) charge asymmetry is presented using data corresponding to an integrated luminosity of 4.6 fb −1 of LHC pp collisions at a centre- of-mass energy of 7 TeV collected by the ATLAS detector. Events with two charged leptons, at least two jets and large missing transverse momentum are selected. Two observables are studied: A tt/C, based on the reconstructed tt final state. The asymmetries are measured to be A ll/C = 0.024 +/- 0.015 (stat.) +/- 0.009 (syst.) Att/C = 0.021 +/- 0.025 (stat.) +/- 0.017 (syst.) The measured values are in agreement with the Standard Model predictions