Electromagnetic energy harvesting using magnetic levitation architectures: a review

Motion-driven electromagnetic energy harvesters have the ability to provide low-cost and customizable electric powering. They are a well-suited technological solution to autonomously supply a broad range of high-sophisticated devices. This paper presents a detailed review focused on major breakthroughs in the scope of electromagnetic energy harvesting using magnetic levitation architectures. A rigorous analysis of twenty-one design configurations was made to compare their geometric and constructive parameters, optimization methodologies and energy harvesting performances. This review also explores the most relevant models (analytical, semi-analytical, empirical and finite element method) already developed to make intelligible the physical phenomena of their transduction mechanisms. The most relevant approaches to model each physical phenomenon of these transduction mechanisms are highlighted in this paper. Very good agreements were found between experimental and simulation tests with deviations lower than 15%. Moreover, the external motion excitations and electric energy harvesting outputs were also comprehensively compared and critically discussed. Electric power densities up to 8 mW/cm^3 (8 kW/m^3) have already been achieved; for resistive loads, the maximum voltage and current were 43.4 V and 150 mA, respectively, for volumes up to 235 cm^3. Results highlight the potential of these harvesters to convert mechanical energy into electric energy both for large-scale and small-scale applications. Moreover, this paper proposes future research directions towards efficiency maximization and minimization of energy production costs.in publicatio

Body composition, strength static and isokinetic, and bone health: comparative study between active adults and amateur soccer players

The Centro de Investigação do Desporto e Actividade Física (Research Unit for the Study of Sport and Physical Activity, uid/dtp/04213/2019) is being funded by Fundação para a Ciência e a Tecnologia. AOW is supported by São Paulo Research Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) process: 2017/27234-2.Objective: To compare tissue composition, total and regional bone mineral content and bone mineral density, static hand grip and knee joint isokinetic strength between amateur soccer players and Control Group. Methods: Cross-sectional study. Air displacement plethysmography was used to estimate body volume and, in turn, density. Body composition, bone mineral content and bone mineral density were assessed for the whole body and at standardized regions using dual energy X-ray absorptiometry. Static grip strength was assessed with an adjustable dynamometer, and peak torque derived from isokinetic strength dynamometer (concentric muscular knee actions at 60°/s). Magnitude of the differences between groups was examined using d-Cohen. Results: Compared to healthy active adults, soccer players showed larger values of whole body bone mineral content (+651g; d=1.60; p<0.01). In addition, differences between groups were large for whole body bone mineral density (d=1.20 to 1.90; p<0.01): lumbar spine, i.e. L1-L4 (+19.4%), upper limbs (+8.6%) and lower limbs (+16.8%). Soccer players attained larger mean values in strength test given by static hand grip protocol (+5.6kg, d=0.99; p<0.01). Conclusion: Soccer adequately regulates body composition and is associated better bone health parameters (bone mineral content and density at whole-body and at particular sites exposed to mechanical loadings).Objetivo: Comparar a composição de tecidos, o conteúdo mineral ósseo e a densidade mineral óssea totais e por regiões do corpo, a força de preensão manual estática, e força isocinética da articulação do joelho, entre um grupo de jogadores de futebol amadores e um Grupo Controle. Métodos: Estudo transversal utilizando pletismografia de ar deslocado para estimar o volume corporal, para subsequente cálculo da densidade corporal. A composição de tecidos, o conteúdo mineral ósseo e a densidade mineral óssea foram avaliados para o corpo todo e regiões padronizadas através da absorciometria de raios-X de dupla energia. A força de preensão manual estática foi avaliada por um dinamômetro ajustável. Os momentos máximos de força das ações musculares concêntricas para os extensores e flexores do joelho foram avaliados pela dinamometria isocinética (60°/s). Foi calculado o valor d-Cohen para apreciar a magnitude do efeito das diferenças entre grupos. Resultados: Os futebolistas apresentaram níveis superiores de conteúdo mineral ósseo em comparação com os adultos ativos do Grupo Controle (+651g; d=1,60; p<0,01) e obtiveram valores superiores de densidade mineral óssea (d: 1,20 a 1,90; p<0,01) para a coluna lombar, L1-L4 (+19,4%), membros superiores (+8,6%) e membros inferiores (+16,8%). Para a força de preensão (estática) a diferença foi moderada (d=0,99; p<0,01) com valores mais elevados apresentados pelo futebolistas (+5,6kg; d=0,99; p<0,01). Conclusão: A prática de futebol promove uma regulação adequada da composição corporal (tecidos magro e gordo) e ganhos na densidade mineral óssea, mais acentuada em partes do corpo com maior exposição aos impactos mecânicos da atividade motora.info:eu-repo/semantics/publishedVersio

Whole-genome sequencing of 1,171 elderly admixed individuals from Brazil

As whole-genome sequencing (WGS) becomes the gold standard tool for studying population genomics and medical applications, data on diverse non-European and admixed individuals are still scarce. Here, we present a high-coverage WGS dataset of 1,171 highly admixed elderly Brazilians from a census-based cohort, providing over 76 million variants, of which ~2 million are absent from large public databases. WGS enables identification of ~2,000 previously undescribed mobile element insertions without previous description, nearly 5 Mb of genomic segments absent from the human genome reference, and over 140 alleles from HLA genes absent from public resources. We reclassify and curate pathogenicity assertions for nearly four hundred variants in genes associated with dominantly-inherited Mendelian disorders and calculate the incidence for selected recessive disorders, demonstrating the clinical usefulness of the present study. Finally, we observe that whole-genome and HLA imputation could be significantly improved compared to available datasets since rare variation represents the largest proportion of input from WGS. These results demonstrate that even smaller sample sizes of underrepresented populations bring relevant data for genomic studies, especially when exploring analyses allowed only by WGS

Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS

The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations

Measurement of the production of a W boson in association with a charm quark in pp collisions at √s = 7 TeV with the ATLAS detector

The production of a W boson in association with a single charm quark is studied using 4.6 fb−1 of pp collision data at s√ = 7 TeV collected with the ATLAS detector at the Large Hadron Collider. In events in which a W boson decays to an electron or muon, the charm quark is tagged either by its semileptonic decay to a muon or by the presence of a charmed meson. The integrated and differential cross sections as a function of the pseudorapidity of the lepton from the W-boson decay are measured. Results are compared to the predictions of next-to-leading-order QCD calculations obtained from various parton distribution function parameterisations. The ratio of the strange-to-down sea-quark distributions is determined to be 0.96+0.26−0.30 at Q 2 = 1.9 GeV2, which supports the hypothesis of an SU(3)-symmetric composition of the light-quark sea. Additionally, the cross-section ratio σ(W + +c¯¯)/σ(W − + c) is compared to the predictions obtained using parton distribution function parameterisations with different assumptions about the s−s¯¯¯ quark asymmetry

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30