884 research outputs found
Adsorption and reaction of CO on (Pd–)Al2O3 and (Pd–)ZrO2: vibrational spectroscopy of carbonate formation
γ-Alumina is widely used as an oxide support in catalysis, and palladium nanoparticles supported by alumina represent one of the most frequently used dispersed metals. The surface sites of the catalysts are often probed via FTIR spectroscopy upon CO adsorption, which may result in the formation of surface carbonate species. We have examined this process in detail utilizing FTIR to monitor carbonate formation on γ-alumina and zirconia upon exposure to isotopically labelled and unlabelled CO and CO2. The same was carried out for well-defined Pd nanoparticles supported on Al2O3 or ZrO2. A water gas shift reaction of CO with surface hydroxyls was detected, which requires surface defect sites and adjacent OH groups. Furthermore, we have studied the effect of Cl synthesis residues, leading to strongly reduced carbonate formation and changes in the OH region (isolated OH groups were partly replaced or were even absent). To corroborate this finding, samples were deliberately poisoned with Cl to an extent comparable to that of synthesis residues, as confirmed by Auger electron spectroscopy. For catalysts prepared from Cl-containing precursors a new CO band at 2164 cm−1 was observed in the carbonyl region, which was ascribed to Pd interacting with Cl. Finally, the FTIR measurements were complemented by quantification of the amount of carbonates formed via chemisorption, which provides a tool to determine the concentration of reactive defect sites on the alumina surface
Zirconium-Titanium Phosphate Acid Catalysts Synthesized by Sol Gel Techniques
Recently a large effort has been put into identifying solid acid materials, particularly sulfated zirconia and other sulfated metal oxides, that can be used to replace environmentally hazardous liquid acids in industrial processes. The authors are studying a group of mixed metal phosphates, some of which have also been sulfated, for their catalytic and morphological characteristics. Zirconium and titanium are the metals used in this study and the catalysts are synthesized from alkoxide starting materials with H{sub 3}PO{sub 4}, H{sub 2}O, and sometimes H{sub 2}SO{sub 4} as gelling agents. The measurement of acidity was achieved by using the isomerization of 2-methyl-2-pentene as a model reaction. The phosphate stabilized the mixed metal sulfates, preventing them from calcining to oxides boosting their initial catalytic activity. The addition of sulfate prevented the formation of the catalytically inactive mixed metal pyrophosphates when calcined at high temperatures (> 773 K)
Conformal sulfated zirconia monolayer catalysts for the one-pot synthesis of ethyl levulinate from glucose
Here we describe a simple route to creating conformal sulphated zirconia monolayers throughout an SBA-15 architecture that confers efficient acid-catalysed one-pot conversion of glucose to ethyl levulinate
Zirconia catalysed acetic acid ketonisation for pre-treatment of biomass fast pyrolysis vapours.
Crude pyrolysis bio-oil contains significant quantities of carboxylic acids which limit its utility as a biofuel. Vapour phase ketonisation of organic acids contained within biomass fast-pyrolysis vapours offers a potential pre-treatment to improve the stability and energy content of resulting bio-oils formed upon condensation. Zirconia is a promising catalyst for such reactions, however little is known regarding the impact of thermal processing on the physicochemical properties of zirconia in the context of their corresponding reactivity for the vapour phase ketonisation of acetic acid. Here we show that calcination progressively transforms amorphous Zr(OH)4 into small tetragonal ZrO2 crystallites at 400 °C, and subsequently larger monoclinic crystallites >600 °C. These phase transitions are accompanied by an increase in the density of Lewis acid sites, and concomitant decrease in their acid strength, attributed to surface dehydroxylation and anion vacancy formation. Weak Lewis acid sites (and/or resulting acid-base pairs) are identified as the active species responsible for acetic acid ketonisation to acetone at 350 °C and 400 °C, with stronger Lewis acid sites favouring competing unselective reactions and carbon laydown. Acetone selectivity is independent of acid strength
Synthesis of Ti(SO4)O solid acid nano-catalyst and its application for biodiesel production from used cooking oil
A novel solid acid nano-catalyst [Ti(SO4)O] was synthesised and used for the simultaneous esterification and transesterification of free fatty acids in used cooking oil (UCO) to produce biodiesel. The synthesised nano-catalyst was fully characterized by different analytical techniques. The XPS results clearly confirmed that the bidentate sulphate coordinated to the Ti4+ metal in the nano-catalyst product. Obtained d-spacing values from the experimental data of XRD peaks and the SAED pattern of produced nano-catalyst agreed well with the d-spacing values from the JCPDS-ICDD card numbers 04-011-4951 for titanium sulphate oxide or titanium oxysulfate crystal structures.This confirms the sulphate groups were within the crystalline structure rather than on the surface of titania nanoparticles, which has not been previously reported. It has been demonstrated 97.1% yield for the fatty acid methyl ester can be achieved usign the synthetised catalyst under a reaction time of 3 h, catalyst to UCO ration of 1.5 wt% and methanol to UCO ratio of 9:1 at 75 °C reaction temperature. The nano-catalyst showed a good catalytic activity for the feedstock containing ≤6 wt% free fatty acid. Furthermore, the catalytic activity and re-usability of the Ti(SO4)O for the esterification/transesterification of UCO were investigated. XRD results confirmed that the amount of View the MathML source species in the solid acid nano-catalyst slowly decreased with re-use after 8 cycles under optimised conditions, which is higher than the reusability of other functionalised titania reported in the literature. Finally, the biodiesel prodcued from this process satisfied the ASTM and European Norm standards
- …