Experimental investigations and variability considerations on 3D interlock textile composites used in low velocity soft impact loading

This study investigates the performance of three-dimensional (3-D) woven interlock composite plates subjected to impact loading. Low velocity (lower than 10 m s 1) impacts with highly deformable rubber impactor are addressed. Response variability is investigated by conducting several impact tests in the same conditions. The effect of mass and velocity on damage tolerance is studied by varying the impact conditions. Force–time, displacement–time and force–displacement curves are first analyzed in such various impact conditions. Secondly, damage mechanisms are highlighted through microscopic observations. The large geometrical deformation of the rubber impactor during impact leads to a loading less localized than for a hard impactor which induces a wide spread damage distribution. Comments on the relations between damage states and mass–velocity conditions are proposed

Investigation of damage mechanisms in 3D interlock textile composites under low velocity soft impact loading

Performances of a three-dimensional (3-D) woven composites subjected to impact loading are investigated in this study. Low velocity (lower than 10 m.s-1) impacts with largely deformable rubber impactors are adressed. Variability issues by performing repeated impact tests in the same conditions and the mass velocity effect on damage tolerance by varying the impact conditions are the main points of interest. Force-time and force-displacement curves and damage mechanisms observed on micrographies are particularly commented.AN

Nonlinear dynamic response and modeling of a bi-stable composite plate for applications to adaptive structures

This paper discusses the formulation and validation of a low order model to capture the dynamics of a bi-stable composite plate, focusing on the dynamics around its stable states. More specifically, the model aims to capture the complex nonlinear subharmonic behavior observed in the dynamic response of the plate. A system identification approach is used to derive simplified equations of motion for the system. Experimental frequency response diagrams are obtained to characterize the observed dynamics in the identification process. Simulations using the identified model are presented showing excellent agreement with the experimentally observed behavior. A theoretical validation of the model is carried out studying the stability of the modes where subharmonic response was observed. Stability boundaries were computed using averaging techniques showing good agreement with experimental results

Static and Dynamic Analysis of Bistable Piezoelectric-Composite Plates for Energy Harvesting

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/97054/1/AIAA2012-1492.pd

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations

Evidence for the Higgs-boson Yukawa coupling to tau leptons with the ATLAS detector

Results of a search for H → τ τ decays are presented, based on the full set of proton-proton collision data recorded by the ATLAS experiment at the LHC during 2011 and 2012. The data correspond to integrated luminosities of 4.5 fb−1 and 20.3 fb−1 at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV respectively. All combinations of leptonic (τ → `νν¯ with ` = e, µ) and hadronic (τ → hadrons ν) tau decays are considered. An excess of events over the expected background from other Standard Model processes is found with an observed (expected) significance of 4.5 (3.4) standard deviations. This excess provides evidence for the direct coupling of the recently discovered Higgs boson to fermions. The measured signal strength, normalised to the Standard Model expectation, of µ = 1.43 +0.43 −0.37 is consistent with the predicted Yukawa coupling strength in the Standard Model

Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS

The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured

Measurement of the top pair production cross section in 8 TeV proton-proton collisions using kinematic information in the lepton plus jets final state with ATLAS

A measurement is presented of the $t\bar{t}$ inclusive production cross-section in $pp$ collisions at a center-of-mass energy of $\sqrt{s}=8$ TeV using data collected by the ATLAS detector at the CERN Large Hadron Collider. The measurement was performed in the lepton+jets final state using a data set corresponding to an integrated luminosity of 20.3 fb$^{-1}$. The cross-section was obtained using a likelihood discriminant fit and $b$-jet identification was used to improve the signal-to-background ratio. The inclusive $t\bar{t}$ production cross-section was measured to be $260\pm 1{\textrm{(stat.)}} ^{+22}_{-23} {\textrm{(syst.)}}\pm 8{\textrm{(lumi.)}}\pm 4{\mathrm{(beam)}}$ pb assuming a top-quark mass of 172.5 GeV, in good agreement with the theoretical prediction of $253^{+13}_{-15}$ pb. The $t\bar{t}\to (e,\mu)+{\mathrm{jets}}$ production cross-section in the fiducial region determined by the detector acceptance is also reported.Comment: Published version, 19 pages plus author list (35 pages total), 3 figures, 2 tables, all figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/TOPQ-2013-06

Search for squarks and gluinos with the ATLAS detector in final states with jets and missing transverse momentum using √s=8 TeV proton-proton collision data

A search for squarks and gluinos in final states containing high-p T jets, missing transverse momentum and no electrons or muons is presented. The data were recorded in 2012 by the ATLAS experiment in s√=8 TeV proton-proton collisions at the Large Hadron Collider, with a total integrated luminosity of 20.3 fb−1. Results are interpreted in a variety of simplified and specific supersymmetry-breaking models assuming that R-parity is conserved and that the lightest neutralino is the lightest supersymmetric particle. An exclusion limit at the 95% confidence level on the mass of the gluino is set at 1330 GeV for a simplified model incorporating only a gluino and the lightest neutralino. For a simplified model involving the strong production of first- and second-generation squarks, squark masses below 850 GeV (440 GeV) are excluded for a massless lightest neutralino, assuming mass degenerate (single light-flavour) squarks. In mSUGRA/CMSSM models with tan β = 30, A 0 = −2m 0 and μ > 0, squarks and gluinos of equal mass are excluded for masses below 1700 GeV. Additional limits are set for non-universal Higgs mass models with gaugino mediation and for simplified models involving the pair production of gluinos, each decaying to a top squark and a top quark, with the top squark decaying to a charm quark and a neutralino. These limits extend the region of supersymmetric parameter space excluded by previous searches with the ATLAS detector