Optimizing size and distribution of voids in phenolic resins through the choice of catalyst types

Phenolics are widely used for over a century in different industries due to their chemical resistance and thermomechanical properties. However, the presence of voids in phenolic resins has negative effects on the mechanical properties and a conventional approach is to avoid these by utilizing very long cure cycles. Our alternative approach investigates the tailoring of void size and distribution to achieve a better balance between processing time and mechanical properties. Therefore, we produced phenolic resin with a void‐free microstructure by a long cure cycle as a reference. To alter the void size and distributions, we utilized different catalysts and a short cure cycle to obtain phenolic resins and test their flexural properties with respect to the reference. We investigated the fracture surfaces of all materials by SEM, FTIR and compared results to finite element modeling that confirmed the effects of different void size and distributions on the mechanical properties

Characterization of host tolerance to Striga hermonthica

One of the most promising control options against the parasitic weed Striga hermonthica is the use of crop varieties that combine resistance with high levels of tolerance. The aim of this study was to clarify the relation between Striga infestation level, Striga infection level and relative yield loss of sorghum and to use this insight for exploring the options for a proper screening procedure for tolerance. In three pot experiments, conducted in Mali (2003) and The Netherlands (2003, 2004), four sorghum genotypes were exposed to a range of Striga infestation levels, ranging from 0.0625 to 16 seeds cm−3. Observations included regular Striga emergence counts and sorghum grain yield at maturity. There were significant genotype, infestation and genotype × infestation effects on sorghum yield. The relation between infestation level and infection level was density dependent. Furthermore, the relation between Striga infection level and relative yield loss was non-linear, though for the most resistant genotype Framida only the linear part of the relation was obtained, as even at high infestation levels only moderate infection levels were achieved. The results suggest that for resistant genotypes, tolerance can best be quantified as a reduced relative yield loss per aboveground Striga plant, whereas for less resistant genotypes the maximum relative yield loss can best be used. Whether both expressions of tolerance are interrelated could not be resolved. Complications of screening for tolerance under field conditions are discussed

Low-Voltage SEM of Natural Plant Fibers: Microstructure Properties (Surface and Cross-Section) and their Link to the Tensile Properties

In this study, the microstructure of different natural plant fibers (flax, jute, ramie, and sisal fibers) were characterized by using low-voltage Scanning Electron Microscopy (LV-SEM). The LV-SEM observations indicated that jute and sisal fibers exhibit less variation in terms of the fiber cross-sectional area, internal lumen shape and size, and cell wall thickness in comparison to flax and ramie fibers. We find that this is also reflected in the tensile properties of the fibers. The tensile properties of single ramie fibers and their fracture behavior was investigated in detail. The stress-strain behavior showed two distinctive regimes. For linear curves, the tensile strength varies from 648-1086 MPa whereas nonlinear curves result in much lower values (177-452) MPa. This variation was linked to differences in the microstructure of the fibers. The LV-SEM of the tensile fracture surfaces of ramie fibers revealed details on the cell wall structure and its fracture behavior under tensile load. Moreover, the SEM images confirm that the collapse of the primary cell wall generally leads to a non-linear stress-strain curve for single ramie fibers

Search for a W' boson decaying to a bottom quark and a top quark in pp collisions at sqrt(s) = 7 TeV

Results are presented from a search for a W' boson using a dataset corresponding to 5.0 inverse femtobarns of integrated luminosity collected during 2011 by the CMS experiment at the LHC in pp collisions at sqrt(s)=7 TeV. The W' boson is modeled as a heavy W boson, but different scenarios for the couplings to fermions are considered, involving both left-handed and right-handed chiral projections of the fermions, as well as an arbitrary mixture of the two. The search is performed in the decay channel W' to t b, leading to a final state signature with a single lepton (e, mu), missing transverse energy, and jets, at least one of which is tagged as a b-jet. A W' boson that couples to fermions with the same coupling constant as the W, but to the right-handed rather than left-handed chiral projections, is excluded for masses below 1.85 TeV at the 95% confidence level. For the first time using LHC data, constraints on the W' gauge coupling for a set of left- and right-handed coupling combinations have been placed. These results represent a significant improvement over previously published limits.Comment: Submitted to Physics Letters B. Replaced with version publishe

Search for the standard model Higgs boson decaying into two photons in pp collisions at sqrt(s)=7 TeV

A search for a Higgs boson decaying into two photons is described. The analysis is performed using a dataset recorded by the CMS experiment at the LHC from pp collisions at a centre-of-mass energy of 7 TeV, which corresponds to an integrated luminosity of 4.8 inverse femtobarns. Limits are set on the cross section of the standard model Higgs boson decaying to two photons. The expected exclusion limit at 95% confidence level is between 1.4 and 2.4 times the standard model cross section in the mass range between 110 and 150 GeV. The analysis of the data excludes, at 95% confidence level, the standard model Higgs boson decaying into two photons in the mass range 128 to 132 GeV. The largest excess of events above the expected standard model background is observed for a Higgs boson mass hypothesis of 124 GeV with a local significance of 3.1 sigma. The global significance of observing an excess with a local significance greater than 3.1 sigma anywhere in the search range 110-150 GeV is estimated to be 1.8 sigma. More data are required to ascertain the origin of this excess.Comment: Submitted to Physics Letters

Measurement of the Lambda(b) cross section and the anti-Lambda(b) to Lambda(b) ratio with Lambda(b) to J/Psi Lambda decays in pp collisions at sqrt(s) = 7 TeV

The Lambda(b) differential production cross section and the cross section ratio anti-Lambda(b)/Lambda(b) are measured as functions of transverse momentum pt(Lambda(b)) and rapidity abs(y(Lambda(b))) in pp collisions at sqrt(s) = 7 TeV using data collected by the CMS experiment at the LHC. The measurements are based on Lambda(b) decays reconstructed in the exclusive final state J/Psi Lambda, with the subsequent decays J/Psi to an opposite-sign muon pair and Lambda to proton pion, using a data sample corresponding to an integrated luminosity of 1.9 inverse femtobarns. The product of the cross section times the branching ratio for Lambda(b) to J/Psi Lambda versus pt(Lambda(b)) falls faster than that of b mesons. The measured value of the cross section times the branching ratio for pt(Lambda(b)) > 10 GeV and abs(y(Lambda(b))) < 2.0 is 1.06 +/- 0.06 +/- 0.12 nb, and the integrated cross section ratio for anti-Lambda(b)/Lambda(b) is 1.02 +/- 0.07 +/- 0.09, where the uncertainties are statistical and systematic, respectively.Comment: Submitted to Physics Letters

Search for new physics in events with opposite-sign leptons, jets, and missing transverse energy in pp collisions at sqrt(s) = 7 TeV

A search is presented for physics beyond the standard model (BSM) in final states with a pair of opposite-sign isolated leptons accompanied by jets and missing transverse energy. The search uses LHC data recorded at a center-of-mass energy sqrt(s) = 7 TeV with the CMS detector, corresponding to an integrated luminosity of approximately 5 inverse femtobarns. Two complementary search strategies are employed. The first probes models with a specific dilepton production mechanism that leads to a characteristic kinematic edge in the dilepton mass distribution. The second strategy probes models of dilepton production with heavy, colored objects that decay to final states including invisible particles, leading to very large hadronic activity and missing transverse energy. No evidence for an event yield in excess of the standard model expectations is found. Upper limits on the BSM contributions to the signal regions are deduced from the results, which are used to exclude a region of the parameter space of the constrained minimal supersymmetric extension of the standard model. Additional information related to detector efficiencies and response is provided to allow testing specific models of BSM physics not considered in this paper.Comment: Replaced with published version. Added journal reference and DO

Measurement of isolated photon production in pp and PbPb collisions at sqrt(sNN) = 2.76 TeV

Isolated photon production is measured in proton-proton and lead-lead collisions at nucleon-nucleon centre-of-mass energies of 2.76 TeV in the pseudorapidity range |eta|<1.44 and transverse energies ET between 20 and 80 GeV with the CMS detector at the LHC. The measured ET spectra are found to be in good agreement with next-to-leading-order perturbative QCD predictions. The ratio of PbPb to pp isolated photon ET-differential yields, scaled by the number of incoherent nucleon-nucleon collisions, is consistent with unity for all PbPb reaction centralities.Comment: Submitted to Physics Letters

Measurement of the mass difference between top quark and antiquark in pp collisions at root s=8 TeV

Peer reviewe

Search for the associated production of the Higgs boson with a top-quark pair

A search for the standard model Higgs boson produced in association with a top-quark pair t t ¯ H (tt¯H) is presented, using data samples corresponding to integrated luminosities of up to 5.1 fb &#8722;1 and 19.7 fb &#8722;1 collected in pp collisions at center-of-mass energies of 7 TeV and 8 TeV respectively. The search is based on the following signatures of the Higgs boson decay: H &#8594; hadrons, H &#8594; photons, and H &#8594; leptons. The results are characterized by an observed t t ¯ H tt¯H signal strength relative to the standard model cross section, &#956; = &#963;/&#963; SM ,under the assumption that the Higgs boson decays as expected in the standard model. The best fit value is &#956; = 2.8 ± 1.0 for a Higgs boson mass of 125.6 GeV