The Ecology of Bioeroding Sponges on Caribbean Coral Reefs

Sponges contribute to large number of functions in coral reef ecosystems. Among these, bioerosion is perhaps one of the most widely studied, largely due to the important contribution of excavating sponges to the carbonate budget on coral reefs (up to 95 % of the total internal bioerosion). Despite our current knowledge, much of the literature is centred on individual-based observations, and little is known about their ecological role and interactions with other reef taxa in complex coral reef systems. The aim of this thesis was to quantify the ecological interactions of bioeroding sponges with major reef taxa by scaling up individual observations to population and ecosystem-based approaches. A cosmopolitan, abundant and highly competitive bioeroding sponge from Glover’s Atoll, Belize (Cliona tenuis) was used as model species. Monitoring of C. tenuis populations throughout 2009 indicated a trade-off between reproduction and growth, with the highest growth rates (31.4 ± 5.6 mm.y–1) occurring in summer, and a peak in reproductive output during winter. Populations typically show strong left-skewed size frequency distributions, mostly represented by juvenile-size individuals (46%), suggesting that regulating mechanisms (e.g. competition and predation) may be acting in constraining the transition of juveniles to adult sizes. Long-term in situ manipulations showed no effect of predation, yet competition with macroalgae significantly reduced the size of the sponge by 38% ± 11% (SE). While C. tenuis exhibit high growth and recruitment rates that could theoretically result in rapid population growth, the likelihood of sponges forming an alternative stable state as reefs sustain greater levels of disturbance is unclear. An analytical modelling approach of the interplay between macroalgae, coral and sponge was used to explore the likelihood of alternate stable states. The results show that irrespective of successful sponge invasion, inclusion of this third antagonist (in the interplay between coral and macroalgae) can qualitatively affect the likelihood of alternative stable state. The model exhibits emergent properties suggestive of intransitivity between the three competing taxa. Despite the potential of C. tenuis to benefit from disturbance, there are few cases in the literature reporting increases in bioeroding sponge abundance followed disturbance. Therefore, regulating mechanisms such as competition with other taxa, recruitment limitation or mortality are expected to exert demographic control on the populations of bioeroding sponges when space limitation is relaxed due to coral mortality. To determine processes regulating sponge populations, an individual-based spatial modelling approach was used to simulate the population dynamics of C. tenuis in a dynamic ecosystem environment. Using an orthogonal hypothesis testing approach, it was found that competition, and to a lesser extend partial mortality of the sponge tissue, largely regulate the population structure of C. tenuis. While reductions in coral cover may temporarily favour the rapid colonization by sponges, the competitive superiority of macroalgae may steal the opportunity from the opportunists.Fondo Nacional de Ciencia, Tecnología e Innovación (FONACIT

Aplicaciones electroquímicas al tratamiento de aguas residuales

El presente libro tiene como finalidad compilar numerosas investigaciones en el campo de la tecnología electroquímica y sus aplicaciones ambientales, contando con la colaboración de un gran número de investigadores tanto nacionales como extranjeros, proponiendo con ello una visión amplia dentro de la aplicación de la electroquímica. Los temas que integran esta obra se escogieron cuidadosamente considerando desde los principios básicos de la electroquímica aplicada al tratamiento de aguas residuales hasta los parámetros a considerar durante el diseño, operación y evaluación de dichos sistemas, sin dejar de lado las aplicaciones utilizadas en la actualidad en la industria, la docencia y la investigación. Este libro reúne diversas temáticas por lo que puede considerarse como un compendio de aquellos elementos que el lector requiere para poder tener una visión amplia de las aplicaciones de la electroquímica en el campo del tratamiento de agua residual.En el Capítulo 1 se presenta una primera impresión de los Fundamentes de la Electroquímica Ambiental, en donde los autores explican cómo esta disciplina es una nueva área de la ciencia en donde se emplean conocimientos de Electroquímica, Ingeniería Química y Ciencia de Materiales, así como las aplicaciones específicas para la remediación ambiental. En el Capítulo 2 los autores ofrecen una descripción de los principales parámetros fisicoquímicos y biológicos que se emplean para definir a la calidad del agua. Este capítulo describe en función de qué características físicas, químicas y biológicas se puede evaluar a un agua residual así como también la aplicación de estas características como variables de control de un proceso de tratamiento y también como el empleo de ellas para limitar las concentraciones máximas permisibles de descarga de aguas residuales. El Capítulo 3 se refiere a uno de los procesos más empleados en el tratamiento de agua: la coagulación-floculación. Se aborda desde una óptica teórica hasta la descripción de un ejemplo de aplicación en la industria. Resulta importante incluir este capítulo ya que uno de los métodos más prometedores en la electroquímica ambiental es la electrocoagulación, la cual se narra en el Capítulo 6. Las bases de las celdas de laboratorio y reactores industriales electroquímicos se relatan en el Capítulo 4. En particular, se refieren las implicaciones que tienen las principales características físicas y de diseño de celdas de laboratorio y reactores electroquímicos industriales que permiten obtener transformaciones eficientes gracias a un correcto control del potencial de electrodo en estos sistemas. La implementación de procesos electroquímicos para su aplicación a nivel industrial, requiere del diseño eficiente del dispositivo central: el reactor electroquímico. Por lo que, en el Capítulo 5 se presentan los elementos de análisis de reactores electroquímicos para su diseño y caracterización. El Capítulo 7 describe bajo qué circunstancias se puede llevar a cabo el proceso de electroflotación. Los autores muestran cómo este proceso está influenciado por el pH de la solución acuosa, la densidad de corriente y el tipo de electrodos que se emplean. El lector encontrará en el Capítulo 8 las bases teóricas de uno de los procesos que involucra la química de la reacción de Fenton, así como las aplicaciones ambientales para el tratamiento de soluciones sintéticas y reales con diferentes contaminantes refractarios, tales como plaguicidas, colorantes, productos de cuidado personal, fármacos y residuos químicos industriales. En el Capítulo 9 se presentan algunos conceptos fundamentales sobre la Electrooxidación, también conocida como oxidación electroquímica, la cual está enfocada a realizar la oxidación de contaminantes presentes en aguas residuales sobre la superficie de electrodos. La tecnología para la electrogeneración de peróxido de hidrógeno y su empleo en el tratamiento de agua residual se describe en el Capítulo 10. Uno de los metales pesados que tienen un alto grado de toxicidad en el ambiente es el Cr(VI), el cual no puede ser removido por métodos convencionales por lo que una tecnología que puede emplearse en este tratamiento se relata en el Capítulo 11. En el Capítulo 12 se presentan los avances más recientes cuando se emplean los métodos electroquímicos con algún otro tipo de tratamiento, lo que ha resultado en la obtención de sinergias en los procesos, lo que implica una reducción en los costos de operación. Finalmente, en el Capítulo 13, se presenta el tema de usos y aplicaciones de sensores químicos y electroquímicos para la detección de contaminantes en agua y agua residual

Cabbage and fermented vegetables : From death rate heterogeneity in countries to candidates for mitigation strategies of severe COVID-19

Large differences in COVID-19 death rates exist between countries and between regions of the same country. Some very low death rate countries such as Eastern Asia, Central Europe, or the Balkans have a common feature of eating large quantities of fermented foods. Although biases exist when examining ecological studies, fermented vegetables or cabbage have been associated with low death rates in European countries. SARS-CoV-2 binds to its receptor, the angiotensin-converting enzyme 2 (ACE2). As a result of SARS-CoV-2 binding, ACE2 downregulation enhances the angiotensin II receptor type 1 (AT(1)R) axis associated with oxidative stress. This leads to insulin resistance as well as lung and endothelial damage, two severe outcomes of COVID-19. The nuclear factor (erythroid-derived 2)-like 2 (Nrf2) is the most potent antioxidant in humans and can block in particular the AT(1)R axis. Cabbage contains precursors of sulforaphane, the most active natural activator of Nrf2. Fermented vegetables contain many lactobacilli, which are also potent Nrf2 activators. Three examples are: kimchi in Korea, westernized foods, and the slum paradox. It is proposed that fermented cabbage is a proof-of-concept of dietary manipulations that may enhance Nrf2-associated antioxidant effects, helpful in mitigating COVID-19 severity.Peer reviewe

Nrf2-interacting nutrients and COVID-19 : time for research to develop adaptation strategies

There are large between- and within-country variations in COVID-19 death rates. Some very low death rate settings such as Eastern Asia, Central Europe, the Balkans and Africa have a common feature of eating large quantities of fermented foods whose intake is associated with the activation of the Nrf2 (Nuclear factor (erythroid-derived 2)-like 2) anti-oxidant transcription factor. There are many Nrf2-interacting nutrients (berberine, curcumin, epigallocatechin gallate, genistein, quercetin, resveratrol, sulforaphane) that all act similarly to reduce insulin resistance, endothelial damage, lung injury and cytokine storm. They also act on the same mechanisms (mTOR: Mammalian target of rapamycin, PPAR gamma:Peroxisome proliferator-activated receptor, NF kappa B: Nuclear factor kappa B, ERK: Extracellular signal-regulated kinases and eIF2 alpha:Elongation initiation factor 2 alpha). They may as a result be important in mitigating the severity of COVID-19, acting through the endoplasmic reticulum stress or ACE-Angiotensin-II-AT(1)R axis (AT(1)R) pathway. Many Nrf2-interacting nutrients are also interacting with TRPA1 and/or TRPV1. Interestingly, geographical areas with very low COVID-19 mortality are those with the lowest prevalence of obesity (Sub-Saharan Africa and Asia). It is tempting to propose that Nrf2-interacting foods and nutrients can re-balance insulin resistance and have a significant effect on COVID-19 severity. It is therefore possible that the intake of these foods may restore an optimal natural balance for the Nrf2 pathway and may be of interest in the mitigation of COVID-19 severity

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Measurement of nuclear modification factors of gamma(1S)), gamma(2S), and gamma(3S) mesons in PbPb collisions at root s(NN)=5.02 TeV

The cross sections for ϒ(1S), ϒ(2S), and ϒ(3S) production in lead-lead (PbPb) and proton-proton (pp) collisions at √sNN = 5.02 TeV have been measured using the CMS detector at the LHC. The nuclear modification factors, RAA, derived from the PbPb-to-pp ratio of yields for each state, are studied as functions of meson rapidity and transverse momentum, as well as PbPb collision centrality. The yields of all three states are found to be significantly suppressed, and compatible with a sequential ordering of the suppression, RAA(ϒ(1S)) > RAA(ϒ(2S)) > RAA(ϒ(3S)). The suppression of ϒ(1S) is larger than that seen at √sNN = 2.76 TeV, although the two are compatible within uncertainties. The upper limit on the RAA of ϒ(3S) integrated over pT, rapidity and centrality is 0.096 at 95% confidence level, which is the strongest suppression observed for a quarkonium state in heavy ion collisions to date. © 2019 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). Funded by SCOAP3.Peer reviewe

Electroweak production of two jets in association with a Z boson in proton-proton collisions root s =13 TeV

A measurement of the electroweak (EW) production of two jets in association with a Z boson in proton-proton collisions at root s = 13 TeV is presented, based on data recorded in 2016 by the CMS experiment at the LHC corresponding to an integrated luminosity of 35.9 fb(-1). The measurement is performed in the lljj final state with l including electrons and muons, and the jets j corresponding to the quarks produced in the hard interaction. The measured cross section in a kinematic region defined by invariant masses m(ll) > 50 GeV, m(jj) > 120 GeV, and transverse momenta P-Tj > 25 GeV is sigma(EW) (lljj) = 534 +/- 20 (stat) fb (syst) fb, in agreement with leading-order standard model predictions. The final state is also used to perform a search for anomalous trilinear gauge couplings. No evidence is found and limits on anomalous trilinear gauge couplings associated with dimension-six operators are given in the framework of an effective field theory. The corresponding 95% confidence level intervals are -2.6 <cwww/Lambda(2) <2.6 TeV-2 and -8.4 <cw/Lambda(2) <10.1 TeV-2. The additional jet activity of events in a signal-enriched region is also studied, and the measurements are in agreement with predictions.Peer reviewe

Search for Physics beyond the Standard Model in Events with Overlapping Photons and Jets

Results are reported from a search for new particles that decay into a photon and two gluons, in events with jets. Novel jet substructure techniques are developed that allow photons to be identified in an environment densely populated with hadrons. The analyzed proton-proton collision data were collected by the CMS experiment at the LHC, in 2016 at root s = 13 TeV, and correspond to an integrated luminosity of 35.9 fb(-1). The spectra of total transverse hadronic energy of candidate events are examined for deviations from the standard model predictions. No statistically significant excess is observed over the expected background. The first cross section limits on new physics processes resulting in such events are set. The results are interpreted as upper limits on the rate of gluino pair production, utilizing a simplified stealth supersymmetry model. The excluded gluino masses extend up to 1.7 TeV, for a neutralino mass of 200 GeV and exceed previous mass constraints set by analyses targeting events with isolated photons.Peer reviewe

Measurement of the top quark forward-backward production asymmetry and the anomalous chromoelectric and chromomagnetic moments in pp collisions at √s = 13 TeV

Abstract The parton-level top quark (t) forward-backward asymmetry and the anomalous chromoelectric (d̂ t) and chromomagnetic (μ̂ t) moments have been measured using LHC pp collisions at a center-of-mass energy of 13 TeV, collected in the CMS detector in a data sample corresponding to an integrated luminosity of 35.9 fb−1. The linearized variable AFB(1) is used to approximate the asymmetry. Candidate t t ¯ events decaying to a muon or electron and jets in final states with low and high Lorentz boosts are selected and reconstructed using a fit of the kinematic distributions of the decay products to those expected for t t ¯ final states. The values found for the parameters are AFB(1)=0.048−0.087+0.095(stat)−0.029+0.020(syst),μ̂t=−0.024−0.009+0.013(stat)−0.011+0.016(syst), and a limit is placed on the magnitude of | d̂ t| &lt; 0.03 at 95% confidence level. [Figure not available: see fulltext.

An embedding technique to determine ττ backgrounds in proton-proton collision data

An embedding technique is presented to estimate standard model tau tau backgrounds from data with minimal simulation input. In the data, the muons are removed from reconstructed mu mu events and replaced with simulated tau leptons with the same kinematic properties. In this way, a set of hybrid events is obtained that does not rely on simulation except for the decay of the tau leptons. The challenges in describing the underlying event or the production of associated jets in the simulation are avoided. The technique described in this paper was developed for CMS. Its validation and the inherent uncertainties are also discussed. The demonstration of the performance of the technique is based on a sample of proton-proton collisions collected by CMS in 2017 at root s = 13 TeV corresponding to an integrated luminosity of 41.5 fb(-1).Peer reviewe