71 research outputs found
Recommended from our members
Performance of Stainless Steel AlSi 304 Wire Reinforced Metal Matrix Composites Made Using Ultrasonic Additive Manufacturing in Bending
Ultrasonic additive manufacturing (UAM) is a solid-state additive and subtractive
manufacturing process that utilizes ultrasonic energy to produce layered metallic parts.
The process is easily extended to create advanced multi-material structures, e.g., metal
matrix composites, functionally graded metallic components, and shape memory alloys.
This research utilizes a three point bending test to compare the elastic modulus in metal
matrix composites (MMC’s) specimens consisting of stainless steel wire reinforcements
with an aluminum matrix to unreinforced test specimens; both specimens are produced by
UAM. In the MMC the volume fraction of wire is relatively low, 0.77%, yet yields an
average increase in modulus of 8.9%.Mechanical Engineerin
Recommended from our members
Examination of Build Height in Ultrasonic Consolidation for Foil Width Specimens Using Supports
Ultrasonic consolidation (UC) is a novel, solid-state, additive manufacturing
fabrication process. It consists of ultrasonic joining of thin metal foils and contour milling
to directly produce functional components in a variety of geometries. The bond between
layers forms when an ultrasonic horn creates a local oscillating stress field at the mating
surfaces. It is commonly theorized that the high frequency vibration under pressure
produces a metallurgical bond without melting the base material. The mechanism behind
the bond is believed to be due to interfacial motion and friction that disrupts surface
contaminants, arguably allowing direct metal to metal contact, and producing sufficient
stress to induce plastic flow and promote the growth of grains across the mating surfaces.
Ignored in this explanation is the role of substrate dimensions on the quality and strength
of the joining process. Researchers have previously examined the effective height
limitations of the build process, i.e., the limiting height to width ratio of one of the
component features being fabricated. This paper extends the experimental work on using
support materials to extend build height on specimens using two different candidate materials, tin bismuth, and a mixture of sugar, corn syrup, and water, referred to as
“candy”. Tin bismuth and candy the represent the extremes of a tradeoff between
convenience and stiffness that a support material must possess.Mechanical Engineerin
Patterns of nucleotide diversity at the regions encompassing the Drosophila insulin-like peptide (dilp) genes: demography vs positive selection in Drosophila melanogaster.
In Drosophila, the insulin-signaling pathway controls some life history traits, such as fertility and lifespan, and it is considered to be the main metabolic pathway involved in establishing adult body size. Several observations concerning variation in body size in the Drosophila genus are suggestive of its adaptive character. Genes encoding proteins in this pathway are, therefore, good candidates to have experienced adaptive changes and to reveal the footprint of positive selection. The Drosophila insulin-like peptides (DILPs) are the ligands that trigger the insulin-signaling cascade. In Drosophila melanogaster, there are several peptides that are structurally similar to the single mammalian insulin peptide. The footprint of recent adaptive changes on nucleotide variation can be unveiled through the analysis of polymorphism and divergence. With this aim, we have surveyed nucleotide sequence variation at the dilp1-7 genes in a natural population of D. melanogaster. The comparison of polymorphism in D. melanogaster and divergence from D. simulans at different functional classes of the dilp genes provided no evidence of adaptive protein evolution after the split of the D. melanogaster and D. simulans lineages. However, our survey of polymorphism at the dilp gene regions of D. melanogaster has provided some evidence for the action of positive selection at or near these genes. The regions encompassing the dilp1-4 genes and the dilp6 gene stand out as likely affected by recent adaptive events
A Comparative Study of the Short Term Cold Resistance Response in Distantly Related Drosophila Species: The Role of regucalcin and Frost
The molecular basis of short term cold resistance (indexed as chill-coma recovery time) has been mostly addressed in D. melanogaster, where candidate genes (Dca (also known as smp-30) and Frost (Fst)) have been identified. Nevertheless, in Drosophila, the ability to tolerate short term exposure to low temperatures evolved several times independently. Therefore, it is unclear whether variation in the same candidate genes is also responsible for short term cold resistance in distantly related Drosophila species. It should be noted that Dca is a candidate gene for cold resistance in the Sophophora subgenus only, since there is no orthologous gene copy in the Drosophila subgenus. Here we show that, in D. americana (Drosophila subgenus), there is a north-south gradient for a variant at the 5′ non-coding region of regucalcin (a Dca-like gene; in D. melanogaster the proteins encoded by the two genes share 71.9% amino acid identities) but in our D. americana F2 association experiment there is no association between this polymorphism and chill-coma recovery times. Moreover, we found no convincing evidence that this gene is up-regulated after cold shock in both D. americana and D. melanogaster. Size variation in the Fst PEST domain (putatively involved in rapid protein degradation) is observed when comparing distantly related Drosophila species, and is associated with short term cold resistance differences in D. americana. Nevertheless, this effect is likely through body size variation. Moreover, we show that, even at two hours after cold shock, when up-regulation of this gene is maximal in D. melanogaster (about 48 fold expression change), in D. americana this gene is only moderately up-regulated (about 3 fold expression change). Our work thus shows that there are important differences regarding the molecular basis of cold resistance in distantly related Drosophila species
Characterization of the clinical and immunologic phenotype and management of 157 individuals with 56 distinct heterozygous NFKB1 mutations
Background: An increasing number of NFKB1 variants are being identified in patients with heterogeneous immunologic phenotypes. Objective: To characterize the clinical and cellular phenotype as well as the management of patients with heterozygous NFKB1 mutations. Methods: In a worldwide collaborative effort, we evaluated 231 individuals harboring 105 distinct heterozygous NFKB1 variants. To provide evidence for pathogenicity, each variant was assessed in silico; in addition, 32 variants were assessed by functional in vitro testing of nuclear factor of kappa light polypeptide gene enhancer in B cells (NF-kappa B) signaling. Results: We classified 56 of the 105 distinct NFKB1 variants in 157 individuals from 68 unrelated families as pathogenic. Incomplete clinical penetrance (70%) and age-dependent severity of NFKB1-related phenotypes were observed. The phenotype included hypogammaglobulinemia (88.9%), reduced switched memory B cells (60.3%), and respiratory (83%) and gastrointestinal (28.6%) infections, thus characterizing the disorder as primary immunodeficiency. However, the high frequency of autoimmunity (57.4%), lymphoproliferation (52.4%), noninfectious enteropathy (23.1%), opportunistic infections (15.7%), autoinflammation (29.6%), and malignancy (16.8%) identified NF-kappa B1-related disease as an inborn error of immunity with immune dysregulation, rather than a mere primary immunodeficiency. Current treatment includes immunoglobulin replacement and immunosuppressive agents. Conclusions: We present a comprehensive clinical overview of the NF-kappa B1-related phenotype, which includes immunodeficiency, autoimmunity, autoinflammation, and cancer. Because of its multisystem involvement, clinicians from each and every medical discipline need to be made aware of this autosomal-dominant disease. Hematopoietic stem cell transplantation and NF-kappa B1 pathway-targeted therapeutic strategies should be considered in the future.Peer reviewe
The preparatory Set: A Novel Approach to Understanding Stress, Trauma, and the Bodymind Therapies
Basic to all motile life is a differential approach/avoid response to perceived features of environment. The stages of response are initial reflexive noticing and orienting to the stimulus, preparation, and execution of response. Preparation involves a coordination of many aspects of the organism: muscle tone, posture, breathing, autonomic functions, motivational/emotional state, attentional orientation, and expectations. The organism organizes itself in relation to the challenge. We propose to call this the preparatory set (PS). We suggest that the concept of the PS can offer a more nuanced and flexible perspective on the stress response than do current theories. We also hypothesize that the mechanisms of body-mind therapeutic and educational systems (BTES) can be understood through the PS framework. We suggest that the BTES, including meditative movement, meditation, somatic education, and the body-oriented psychotherapies, are approaches that use interventions on the PS to remedy stress and trauma. We discuss how the PS can be adaptive or maladaptive, how BTES interventions may restore adaptive PS, and how these concepts offer a broader and more flexible view of the phenomena of stress and trauma. We offer supportive evidence for our hypotheses, and suggest directions for future research. We believe that the PS framework will point to ways of improving the management of stress and trauma, and that it will suggest directions of research into the mechanisms of action of BTES
Genetic-morphometric variation in Culex quinquefasciatus from Brazil and La Plata, Argentina
Variation among natural populations of Culex (Culex) quinquefasciatus Say is associated with different vectorial capacities. The species Cx. quinquefasciatus is present in the equatorial, tropical and subtropical zones in the Brazilian territory, with intermediate forms between Cx. quinquefasciatus and Culex pipiens occurring in regions of latitudes around 33°-35°S. Herein, we studied geographically distinct populations of Cx. quinquefasciatus by genetic characterization and analysis of intra-specific wing morphometrics. After morphological analysis, molecular characterization of Cx. quinquefasciatus and intermediate forms was performed by polymerase chain reaction of the polymorphic nuclear region of the second intron of the acetylcholinesterase locus. Additionally, the morphology of adult female wings collected from six locations was analyzed. Wing centroid sizes were significantly different between some geographical pairs. Mean values of R2/R2+3 differed significantly after pairwise comparisons. The overall wing shape represented by morphometric characters could be divided into two main groupings. Our data suggest that Brazilian samples are morphologically and genetically distinct from the Argentinean samples and also indicated a morphological distinction between northern and southern populations of Brazilian Cx. quinquefasciatus. We suggest that wing morphology may be used for preliminary assessment of population structure of Cx. quinquefasciatusin Brazil
Molecular mechanisms of cell death: recommendations of the Nomenclature Committee on Cell Death 2018.
Over the past decade, the Nomenclature Committee on Cell Death (NCCD) has formulated guidelines for the definition and interpretation of cell death from morphological, biochemical, and functional perspectives. Since the field continues to expand and novel mechanisms that orchestrate multiple cell death pathways are unveiled, we propose an updated classification of cell death subroutines focusing on mechanistic and essential (as opposed to correlative and dispensable) aspects of the process. As we provide molecularly oriented definitions of terms including intrinsic apoptosis, extrinsic apoptosis, mitochondrial permeability transition (MPT)-driven necrosis, necroptosis, ferroptosis, pyroptosis, parthanatos, entotic cell death, NETotic cell death, lysosome-dependent cell death, autophagy-dependent cell death, immunogenic cell death, cellular senescence, and mitotic catastrophe, we discuss the utility of neologisms that refer to highly specialized instances of these processes. The mission of the NCCD is to provide a widely accepted nomenclature on cell death in support of the continued development of the field
- …