Propuesta de mejora del proceso de mecanizado de porta rodamientos utilizando la técnica de estudio de tiempos en la empresa Famitec Mining S.A.C. Lima, 2017

RESUMEN El presente trabajo de investigación tiene por objetivo principal estimar una propuesta de mejora en el proceso de mecanizado de porta rodamientos modelo D3MRA5002-1C VULCO, aplicando el uso de la técnica de estudio de tiempos en la empresa FAMITEC MINING S.A.C. dedicada a servicios de reparaciones, fabricaciones y mantenimiento en el rubro metal mecánico. Con el fin de identificar la causa de mayor relevancia en el proceso de mecanizado de porta rodamientos, se elaboró el diagrama de Ishikawa, identificando que la demora de este proceso se centra la falta de dispositivos para poder disminuir el tiempo en la operación de centrado de la pieza, la cual puede tomar de 90 a más minutos lo que conlleva a que se alargue el proceso de mecanizado, así como también el retraso en la entrega al cliente del producto final. Por tal motivo, se diseñó un plan piloto con la finalidad de ponerlo a prueba por un lapso de 3 semanas; de este modo, se pueden registrar los tiempos y ritmos de cada elemento de las tareas. Para el desarrollo del primer objetivo específico de la presente investigación, el cual se refiere a la reducción de tiempos en el proceso de mecanizado, se utilizó el criterio de General Electric para determinar el número de observaciones a realizar, tanto en el proceso actual como en el plan piloto; tal criterio nos dice que para ciclos de trabajo de más de 40 minutos, se realizan 3 observaciones; de esta manera, se pudo registrar los tiempos para cada elemento del proceso y así poder determinar el tiempo estándar del ciclo de trabajo. En el desarrollo del segundo objetivo específico, referente a la influencia de la técnica de estudio de tiempos en la capacidad de producción de la empresa, se determinó la capacidad, tanto para el proceso actual como para el plan piloto, teniendo en cuenta una jornada laboral de 8 horas diarias y 26 días laborables al mes, además del tiempo estándar del ciclo de trabajo de dicho proceso. Finalmente, se obtuvieron como resultados del plan piloto y del uso de la técnica de estudio de tiempos, la mejora del proceso de mecanizado, teniendo como conclusiones los siguientes números: reducción de tiempo del elemento 11 de 137,98 a 14,36 minutos, reducción del tiempo estándar del proceso de 342,05 a 256, 38 minutos y el aumento de la capacidad de producción de 31 a 43 unidades por mes.ABSTRACT This research is mainly aimed to estimate a proposal for improvement in the machining process porta bearings model D3MRA5002-1C VULCO, applying the use of the technique of study time in the company Famitec MINING SAC dedicated to repair services, manufacturing and maintenance in the category mechanical metal. In order to identify the cause of greater relevance in the machining process bearing carries the Ishikawa diagram was developed identifying the delay of this process the lack of devices is focused to decrease the time in operation centering piece, which may take from 90 to more minutes which leads to the machining process is lengthened, and also the delay in delivery to the customer of the final product. Therefore, a pilot plan in order to test it for a period of three weeks, so you can record the times and rhythms of each element was designed tasks. For the development of the first specific objective of this research relates to the reduction of time in the machining process, the criterion of General Electric was used to determine the number of observations to make both the current process and the pilot; this criterion tells us that for duty cycles over 40 minutes 3 observations thus performed could record time for each element of the process and thus determine the standard time of the work cycle. In developing the second specific objective concerning the influence of the technique time study in the production capacity of the company, the ability to both the current process and for the pilot scheme taking into account a working day of 8 was determined daily and working 26 days a month, in addition to the standard cycle time of the process working hours. Finally, it was obtained as results of the pilot and use the technique of time study, the improvement of the machining bearing holder, with the findings the following numbers: reduction time element 11 137.98 to 14, 36 minutes, reduced process time standard 342.05-256, 38 minutes and increasing the production capacity of 31 to 43 units per month

Ciencias de la Biología y Agronomía

Este volumen I contiene 17 capítulos arbitrados que se ocupan de estos asuntos en Tópicos Selectos de Ciencias de la Biología y Agronomía, elegidos de entre las contribuciones, reunimos algunos investigadores y estudiantes. Se presenta un Estudio Comparativo de los Recursos Hidrológico-Forestales de la Microcuenca de la Laguna de Epatlan, Pue. (1993 a 2014); la Situación Actual de la Mancha de Asfalto en Maíz (Zea mays L.) en los Municipios de Jiquipilas y Ocozocoautla, Chiapas, México; las poblaciones sobresalientes de maíz de la raza Zapalote Chico, en la Región Istmeña de Oaxaca; Se indica el índice de área foliar de cultivo de Chile Poblano mediante dos métodos en condiciones protegidas; Esquivel, Urzúa y Ramírez exploran el efecto de la biofertilización con Azospirillum en el crecimiento y producción de Jitomate; esbozan su artículo sobre la determinación del nivel de Heterosis en híbridos de Maíz para la Comarca Lagunera; una investigación sobre la estabilización de semilla de Solanum lycopersicum durante el almacenamiento y estimulación de la germinación; acotan sobre el CTAB como una nueva opción para la detección de Huanglongbing en cítricos, plantean su evaluación sobre el aluminio y cómo afecta la vida de florero de Heliconia psittacorum; indican sobre el impacto del H-564C, como un híbrido de maíz con alta calidad de proteina para el trópico húmedo de México; presetan su investigación sobre la producción de Piña Cayena Lisa y MD2 (Ananas comosus L.) en condiciones de Loma Bonita, en Oaxaca; acotan sobre el efecto de coberteras como control biológico por conservación contra áfidos en Nogal Pecanero; esbozan sobre la caracterización de cuatro genotipos de Frijol Negro en Martínez de la Torre, Veracruz, México; presentan una caracterización hidroecológica de la microcuenca de Arroyo Prieto, Yuriría, Gto., y alternativas para su restauración ambiental; presentan su investigación sobre el efecto del hongo Beauveria bassiana sobre solubilización de fosfatos y la disponibilidad de fósforo en el suelo; plantean su investigación sobre la Germinación y regeneración in vitro de Epidendrum falcatum LINDL; esbozan su artículo sobre genotipos de frijol negro y su tolerancia a sequía terminal en Veracruz, México

Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world

Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic. Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality. Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States. Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis. Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Impacts of the Tropical Pacific/Indian Oceans on the Seasonal Cycle of the West African Monsoon

The current consensus is that drought has developed in the Sahel during the second half of the twentieth century as a result of remote effects of oceanic anomalies amplified by local land–atmosphere interactions. This paper focuses on the impacts of oceanic anomalies upon West African climate and specifically aims to identify those from SST anomalies in the Pacific/Indian Oceans during spring and summer seasons, when they were significant. Idealized sensitivity experiments are performed with four atmospheric general circulation models (AGCMs). The prescribed SST patterns used in the AGCMs are based on the leading mode of covariability between SST anomalies over the Pacific/Indian Oceans and summer rainfall over West Africa. The results show that such oceanic anomalies in the Pacific/Indian Ocean lead to a northward shift of an anomalous dry belt from the Gulf of Guinea to the Sahel as the season advances. In the Sahel, the magnitude of rainfall anomalies is comparable to that obtained by other authors using SST anomalies confined to the proximity of the Atlantic Ocean. The mechanism connecting the Pacific/Indian SST anomalies with West African rainfall has a strong seasonal cycle. In spring (May and June), anomalous subsidence develops over both the Maritime Continent and the equatorial Atlantic in response to the enhanced equatorial heating. Precipitation increases over continental West Africa in association with stronger zonal convergence of moisture. In addition, precipitation decreases over the Gulf of Guinea. During the monsoon peak (July and August), the SST anomalies move westward over the equatorial Pacific and the two regions where subsidence occurred earlier in the seasons merge over West Africa. The monsoon weakens and rainfall decreases over the Sahel, especially in August.Peer reviewe

Measurement of the top quark forward-backward production asymmetry and the anomalous chromoelectric and chromomagnetic moments in pp collisions at √s = 13 TeV

Abstract The parton-level top quark (t) forward-backward asymmetry and the anomalous chromoelectric (d̂ t) and chromomagnetic (μ̂ t) moments have been measured using LHC pp collisions at a center-of-mass energy of 13 TeV, collected in the CMS detector in a data sample corresponding to an integrated luminosity of 35.9 fb−1. The linearized variable AFB(1) is used to approximate the asymmetry. Candidate t t ¯ events decaying to a muon or electron and jets in final states with low and high Lorentz boosts are selected and reconstructed using a fit of the kinematic distributions of the decay products to those expected for t t ¯ final states. The values found for the parameters are AFB(1)=0.048−0.087+0.095(stat)−0.029+0.020(syst),μ̂t=−0.024−0.009+0.013(stat)−0.011+0.016(syst), and a limit is placed on the magnitude of | d̂ t| &lt; 0.03 at 95% confidence level. [Figure not available: see fulltext.

Search for heavy resonances decaying to two Higgs bosons in final states containing four b quarks

A search is presented for narrow heavy resonances X decaying into pairs of Higgs bosons (H) in proton-proton collisions collected by the CMS experiment at the LHC at root s = 8 TeV. The data correspond to an integrated luminosity of 19.7 fb(-1). The search considers HH resonances with masses between 1 and 3 TeV, having final states of two b quark pairs. Each Higgs boson is produced with large momentum, and the hadronization products of the pair of b quarks can usually be reconstructed as single large jets. The background from multijet and t (t) over bar events is significantly reduced by applying requirements related to the flavor of the jet, its mass, and its substructure. The signal would be identified as a peak on top of the dijet invariant mass spectrum of the remaining background events. No evidence is observed for such a signal. Upper limits obtained at 95 confidence level for the product of the production cross section and branching fraction sigma(gg -> X) B(X -> HH -> b (b) over barb (b) over bar) range from 10 to 1.5 fb for the mass of X from 1.15 to 2.0 TeV, significantly extending previous searches. For a warped extra dimension theory with amass scale Lambda(R) = 1 TeV, the data exclude radion scalar masses between 1.15 and 1.55 TeV

Search for supersymmetry in events with one lepton and multiple jets in proton-proton collisions at root s=13 TeV

Peer reviewe

An embedding technique to determine ττ backgrounds in proton-proton collision data

An embedding technique is presented to estimate standard model tau tau backgrounds from data with minimal simulation input. In the data, the muons are removed from reconstructed mu mu events and replaced with simulated tau leptons with the same kinematic properties. In this way, a set of hybrid events is obtained that does not rely on simulation except for the decay of the tau leptons. The challenges in describing the underlying event or the production of associated jets in the simulation are avoided. The technique described in this paper was developed for CMS. Its validation and the inherent uncertainties are also discussed. The demonstration of the performance of the technique is based on a sample of proton-proton collisions collected by CMS in 2017 at root s = 13 TeV corresponding to an integrated luminosity of 41.5 fb(-1).Peer reviewe

Measurement of t(t)over-bar normalised multi-differential cross sections in pp collisions at root s=13 TeV, and simultaneous determination of the strong coupling strength, top quark pole mass, and parton distribution functions

Peer reviewe