Evaluation of Margins of Safety in Brazed Joints

One of the essential steps in assuring reliable performance of high cost critical brazed structures is the assessment of the Margin of Safety (MS) of the brazed joints. In many cases the experimental determination of the failure loads by destructive testing of the brazed assembly is not practical and cost prohibitive. In such cases the evaluation of the MS is performed analytically by comparing the maximum design loads with the allowable ones and incorporating various safety or knock down factors imposed by the customer. Unfortunately, an industry standard methodology for the design and analysis of brazed joints has not been developed. This paper provides an example of an approach that was used to analyze an AlBeMet 162 (38%Be-62%Al) structure brazed with the AWS BAlSi-4 (Al-12%Si) filler metal. A practical and conservative interaction equation combining shear and tensile allowables was developed and validated to evaluate an acceptable (safe) combination of tensile and shear stresses acting in the brazed joint. These allowables are obtained from testing of standard tensile and lap shear brazed specimens. The proposed equation enables the assessment of the load carrying capability of complex brazed joints subjected to multi-axial loading

Lengthscale effects on exchange coupling in Co-Pt L10 + L12 nanochessboards

The Co-Pt nanochessboard is a quasi-periodic, nanocomposite tiling of L10 and L12 magnetic phases that offers a novel structure for the investigation of exchange coupling, relevant to permanent magnet applications. Periodicity of the tiling is controlled by the rate of cooling through the eutectoid isotherm, resulting in control over the L10-L12 exchange coupling. First order reversal curve analysis reveals a transition from partial coupling to nearly complete exchange-coupling in a Co40.2Pt59.8 nanochessboard structured alloy as the periodicity is reduced below the critical correlation length. Micromagnetic simulations give insights into how exchange coupling manifests in the tiling, and its impact on microscopic magnetization reversal mechanisms

Effect of lead content on the formation of the 2223 phase

Freeze-dried powders have been used for the formation of the high Tc (110 K) superconducting phase in the Bi-Sr-Ca-Cu-O system. Effects of lead content and oxygen partial pressure were investigated. It was shown that lead content and oxygen partial pressure were affecting liquid phase formation. Lead content affected the dissolution of the 2212 phase into the liquid phase from which the 2223 high Tc superconducting phase forms. Powder reacted as pellet with Bi{sub 1.8}Pb{sub 0.4}Sr{sub 2.0}Ca{sub 2.0}Cu{sub 3.0}O{sub x} composition shows essentially phase pure 2223 after 12 hrs at 845{degrees} C in 7%O{sub 2}

Controlling Thermal Conductivity of Alloys via Atomic Ordering

Many random substitutional solid solutions (alloys) will display a tendency to atomically order given the appropriate kinetic and thermodynamic conditions. Such order-disorder transitions will result in major crystallographic reconfigurations, where the atomic basis, symmetry, and periodicity of the alloy change dramatically. Consequently, phonon behavior in these alloys will vary greatly depending on the type and degree of ordering achieved. To investigate these phenomena, the role of the order-disorder transition on phononic transport properties of Lennard-Jones type binary alloys is explored via nonequilibrium molecular dynamics simulations. Particular attention is paid to regimes in which the alloy is only partially ordered. It is shown that by varying the degree of ordering, the thermal conductivity of a binary alloy of fixed composition can be tuned across an order of magnitude at 10% of the melt temperature, and by a factor of three at 40% of the melt temperature

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Computing: report leaps geographical barriers but stumbles over gender

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/62917/1/441025a.pd

Microstructural evolution of copper-titanium alloy during in-situ formation of TiB2 particles

Bulk Cu-Ti alloy reinforced by TiB2 nano particles was prepared using in-situ reaction between Cu-3.4%Ti and Cu-0.7%B master alloys along with rapid solidification and subsequent heat treatment for 1-10 h at 900 C. High-resolution transmission electron microscopy (HRTEM) characterization showed that primary TiB2 nano particles and TiB whiskers were formed by in-situ reaction between Ti and B in the liquid copper. The formation of TiB whiskers within the melt led to coarsening of TiB2 particles. Primary TiB2 particles were dispersed along the grain boundaries and hindered grain growth at high temperature, while the secondary TiB2 particles were formed during heat treatment of the alloy by diffusion reaction of solute titanium and boron inside the grains. Electrical conductivity and hardness of the composite were evaluated during heat treatment. The results indicated that the formation of secondary TiB2 particles in the matrix caused a delay in hardness reduction at high temperature. The electrical conductivity and hardness increased up to 8 h of heat treatment and reached 33.5% IACS and HV 158, respectively.

Detecting and studying high-energy collider neutrinos with FASER at the LHC

Neutrinos are copiously produced at particle colliders, but no collider neutrino has ever been detected. Colliders produce both neutrinos and anti-neutrinos of all flavors at very high energies, and they are therefore highly complementary to those from other sources. FASER, the Forward Search Experiment at the LHC, is ideally located to provide the first detection and study of collider neutrinos. We investigate the prospects for neutrino studies with FASERν, a proposed component of FASER, consisting of emulsion films interleaved with tungsten plates with a total target mass of 1.2 t, to be placed on-axis at the front of FASER. We estimate the neutrino fluxes and interaction rates, describe the FASERν detector, and analyze the characteristics of the signals and primary backgrounds. For an integrated luminosity of 150 fb^−1 to be collected during Run 3 of the 14 TeV LHC in 2021–23, approximately 1300 electron neutrinos, 20,000 muon neutrinos, and 20 tau neutrinos will interact in FASERν, with mean energies of 600 GeV to 1 TeV. With such rates and energies, FASER will measure neutrino cross sections at energies where they are currently unconstrained, will bound models of forward particle production, and could open a new window on physics beyond the standard model

Search for Higgs bosons produced via vector-boson fusion and decaying into bottom quark pairs in √s =13 TeV pp collisions with the ATLAS detector

A search for the bb ¯ decay of the Standard Model Higgs boson produced through vector-boson fusion is presented. Three mutually exclusive channels are considered: two all-hadronic channels and a photon-associated channel. Results are reported from the analysis of up to 30.6 fb −1 of pp data at s √ =13 TeV collected with the ATLAS detector at the LHC. The measured signal strength relative to the Standard Model prediction from the combined analysis is 2.5 +1.4 −1.3 for inclusive Higgs boson production and 3.0 +1.7 −1.6 for vector-boson fusion production only

Searches for exclusive Higgs and Z boson decays into J/ψγ,ψ(2S)γ,and Υ(nS)γ at √s=13 TeV with the ATLAS detector

Searches for the exclusive decays of the Higgs and Z bosons into a J/ψ,ψ(2S), or Υ(nS)(n=1,2,3) meson and a photon are performed with a pp collision data sample corresponding to an integrated luminosity of 36.1 fb −1 collected at √s =13 TeV with the ATLAS detector at the CERN Large Hadron Collider. No significant excess of events is observed above the expected backgrounds, and 95% confidence-level upper limits on the branching fractions of the Higgs boson decays to J/ψγ, ψ(2S)γ,and Υ(nS)γ of 3.5×10 −4, 2.0×10−3,and(4.9,5.9,5.7)×10 −4,respectively, are obtained assuming Standard Model production. The corresponding 95% confidence-level upper limits for the branching fractions of the Z boson decays are 2.3×10 −6, 4.5×10 −6 and (2.8,1.7,4.8)×10 −6, respectively