Hybrid ant colony system algorithm for static and dynamic job scheduling in grid computing

Grid computing is a distributed system with heterogeneous infrastructures. Resource management system (RMS) is one of the most important components which has great influence on the grid computing performance. The main part of RMS is the scheduler algorithm which has the responsibility to map submitted tasks to available resources. The complexity of scheduling problem is considered as a nondeterministic polynomial complete (NP-complete) problem and therefore, an intelligent algorithm is required to achieve better scheduling solution. One of the prominent intelligent algorithms is ant colony system (ACS) which is implemented widely to solve various types of scheduling problems. However, ACS suffers from stagnation problem in medium and large size grid computing system. ACS is based on exploitation and exploration mechanisms where the exploitation is sufficient but the exploration has a deficiency. The exploration in ACS is based on a random approach without any strategy. This study proposed four hybrid algorithms between ACS, Genetic Algorithm (GA), and Tabu Search (TS) algorithms to enhance the ACS performance. The algorithms are ACS(GA), ACS+GA, ACS(TS), and ACS+TS. These proposed hybrid algorithms will enhance ACS in terms of exploration mechanism and solution refinement by implementing low and high levels hybridization of ACS, GA, and TS algorithms. The proposed algorithms were evaluated against twelve metaheuristic algorithms in static (expected time to compute model) and dynamic (distribution pattern) grid computing environments. A simulator called ExSim was developed to mimic the static and dynamic nature of the grid computing. Experimental results show that the proposed algorithms outperform ACS in terms of best makespan values. Performance of ACS(GA), ACS+GA, ACS(TS), and ACS+TS are better than ACS by 0.35%, 2.03%, 4.65% and 6.99% respectively for static environment. For dynamic environment, performance of ACS(GA), ACS+GA, ACS+TS, and ACS(TS) are better than ACS by 0.01%, 0.56%, 1.16%, and 1.26% respectively. The proposed algorithms can be used to schedule tasks in grid computing with better performance in terms of makespan

DISCRETE PARTICLE SWARM OPTIMIZATION FOR THE ORIENTEERING PROBLEM

Discrete particle swarm optimization (DPSO) is gaining popularity in the area of combinatorial optimization in the recent past due to its simplicity in coding and consistency in performance.  A DPSO algorithm has been developed for orienteering problem (OP) which has been shown to have many practical applications.  It uses reduced variable neighborhood search as a local search tool.  The DPSO algorithm was compared with ten heuristic models from the literature using benchmark problems.  The results show that the DPSO algorithm is a robust algorithm that can optimally solve the well known OP test problems

The 2-stage assembly flowshop scheduling problem with total completion time: Efficient constructive heuristic and metaheuristic

In this paper, we address the 2-stage assembly scheduling problem where there are m machines in the first stage to manufacture the components of a product and one assembly station (machine) in the second stage. The objective considered is the minimisation of the total completion time. Since the NP-hard nature of this problem is well-established, most previous research has focused on finding approximate solutions in reasonable computation time. In our paper, we first review and derive a number of problem properties and, based on these ideas, we develop a constructive heuristic that outperforms the existing constructive heuristics for the problem, providing solutions almost in real-time. Finally, for the cases where extremely high-quality solutions are required, a variable local search algorithm is proposed. The computational experience carried out shows that the algorithm outperforms the best existing metaheuristic for the problem. As a summary, the heuristics presented in the paper substantially modify the state-of-the-art of the approximate methods for the 2-stage assembly scheduling problem with total completion time objective

Algorithms and Methods for Designing and Scheduling Smart Manufacturing Systems

This book, as a Special Issue, is a collection of some of the latest advancements in designing and scheduling smart manufacturing systems. The smart manufacturing concept is undoubtedly considered a paradigm shift in manufacturing technology. This conception is part of the Industry 4.0 strategy, or equivalent national policies, and brings new challenges and opportunities for the companies that are facing tough global competition. Industry 4.0 should not only be perceived as one of many possible strategies for manufacturing companies, but also as an important practice within organizations. The main focus of Industry 4.0 implementation is to combine production, information technology, and the internet. The presented Special Issue consists of ten research papers presenting the latest works in the field. The papers include various topics, which can be divided into three categories—(i) designing and scheduling manufacturing systems (seven articles), (ii) machining process optimization (two articles), (iii) digital insurance platforms (one article). Most of the mentioned research problems are solved in these articles by using genetic algorithms, the harmony search algorithm, the hybrid bat algorithm, the combined whale optimization algorithm, and other optimization and decision-making methods. The above-mentioned groups of articles are briefly described in this order in this book

Optimum Allocation of Inspection Stations in Multistage Manufacturing Processes by Using Max-Min Ant System

In multistage manufacturing processes it is common to locate inspection stations after some or all of the processing workstations. The purpose of the inspection is to reduce the total manufacturing cost, resulted from unidentified defective items being processed unnecessarily through subsequent manufacturing operations. This total cost is the sum of the costs of production, inspection and failures (during production and after shipment). Introducing inspection stations into a serial multistage manufacturing process, although constituting an additional cost, is expected to be a profitable course of action. Specifically, at some positions the associated inspection costs will be recovered from the benefits realised through the detection of defective items, before wasting additional cost by continuing to process them. In this research, a novel general cost modelling for allocating a limited number of inspection stations in serial multistage manufacturing processes is formulated. In allocation of inspection station (AOIS) problem, as the number of workstations increases, the number of inspection station allocation possibilities increases exponentially. To identify the appropriate approach for the AOIS problem, different optimisation methods are investigated. The MAX-MIN Ant System (MMAS) algorithm is proposed as a novel approach to explore AOIS in serial multistage manufacturing processes. MMAS is an ant colony optimisation algorithm that was designed originally to begin an explorative search phase and, subsequently, to make a slow transition to the intensive exploitation of the best solutions found during the search, by allowing only one ant to update the pheromone trails. Two novel heuristics information for the MMAS algorithm are created. The heuristic information for the MMAS algorithm is exploited as a novel means to guide ants to build reasonably good solutions from the very beginning of the search. To improve the performance of the MMAS algorithm, six local search methods which are well-known and suitable for the AOIS problem are used. Selecting relevant parameter values for the MMAS algorithm can have a great impact on the algorithm’s performance. As a result, a method for tuning the most influential parameter values for the MMAS algorithm is developed. The contribution of this research is, for the first time, a methodology using MMAS to solve the AOIS problem in serial multistage manufacturing processes has been developed. The methodology takes into account the constraints on inspection resources, in terms of a limited number of inspection stations. As a result, the total manufacturing cost of a product can be reduced, while maintaining the quality of the product. Four numerical experiments are conducted to assess the MMAS algorithm for the AOIS problem. The performance of the MMAS algorithm is compared with a number of other methods this includes the complete enumeration method (CEM), rule of thumb, a pure random search algorithm, particle swarm optimisation, simulated annealing and genetic algorithm. The experimental results show that the effectiveness of the MMAS algorithm lies in its considerably shorter execution time and robustness. Further, in certain conditions results obtained by the MMAS algorithm are identical to the CEM. In addition, the results show that applying local search to the MMAS algorithm has significantly improved the performance of the algorithm. Also the results demonstrate that it is essential to use heuristic information with the MMAS algorithm for the AOIS problem, in order to obtain a high quality solution. It was found that the main parameters of MMAS include the pheromone trail intensity, heuristic information and evaporation of pheromone are less sensitive within the specified range as the number of workstations is significantly increased

From metaheuristics to learnheuristics: Applications to logistics, finance, and computing

Un gran nombre de processos de presa de decisions en sectors estratègics com el transport i la producció representen problemes NP-difícils. Sovint, aquests processos es caracteritzen per alts nivells d'incertesa i dinamisme. Les metaheurístiques són mètodes populars per a resoldre problemes d'optimització difícils en temps de càlcul raonables. No obstant això, sovint assumeixen que els inputs, les funcions objectiu, i les restriccions són deterministes i conegudes. Aquests constitueixen supòsits forts que obliguen a treballar amb problemes simplificats. Com a conseqüència, les solucions poden conduir a resultats pobres. Les simheurístiques integren la simulació a les metaheurístiques per resoldre problemes estocàstics d'una manera natural. Anàlogament, les learnheurístiques combinen l'estadística amb les metaheurístiques per fer front a problemes en entorns dinàmics, en què els inputs poden dependre de l'estructura de la solució. En aquest context, les principals contribucions d'aquesta tesi són: el disseny de les learnheurístiques, una classificació dels treballs que combinen l'estadística / l'aprenentatge automàtic i les metaheurístiques, i diverses aplicacions en transport, producció, finances i computació.Un gran número de procesos de toma de decisiones en sectores estratégicos como el transporte y la producción representan problemas NP-difíciles. Frecuentemente, estos problemas se caracterizan por altos niveles de incertidumbre y dinamismo. Las metaheurísticas son métodos populares para resolver problemas difíciles de optimización de manera rápida. Sin embargo, suelen asumir que los inputs, las funciones objetivo y las restricciones son deterministas y se conocen de antemano. Estas fuertes suposiciones conducen a trabajar con problemas simplificados. Como consecuencia, las soluciones obtenidas pueden tener un pobre rendimiento. Las simheurísticas integran simulación en metaheurísticas para resolver problemas estocásticos de una manera natural. De manera similar, las learnheurísticas combinan aprendizaje estadístico y metaheurísticas para abordar problemas en entornos dinámicos, donde los inputs pueden depender de la estructura de la solución. En este contexto, las principales aportaciones de esta tesis son: el diseño de las learnheurísticas, una clasificación de trabajos que combinan estadística / aprendizaje automático y metaheurísticas, y varias aplicaciones en transporte, producción, finanzas y computación.A large number of decision-making processes in strategic sectors such as transport and production involve NP-hard problems, which are frequently characterized by high levels of uncertainty and dynamism. Metaheuristics have become the predominant method for solving challenging optimization problems in reasonable computing times. However, they frequently assume that inputs, objective functions and constraints are deterministic and known in advance. These strong assumptions lead to work on oversimplified problems, and the solutions may demonstrate poor performance when implemented. Simheuristics, in turn, integrate simulation into metaheuristics as a way to naturally solve stochastic problems, and, in a similar fashion, learnheuristics combine statistical learning and metaheuristics to tackle problems in dynamic environments, where inputs may depend on the structure of the solution. The main contributions of this thesis include (i) a design for learnheuristics; (ii) a classification of works that hybridize statistical and machine learning and metaheuristics; and (iii) several applications for the fields of transport, production, finance and computing

Metaheuristics “In the Large”

Many people have generously given their time to the various activities of the MitL initiative. Particular gratitude is due to Adam Barwell, John A. Clark, Patrick De Causmaecker, Emma Hart, Zoltan A. Kocsis, Ben Kovitz, Krzysztof Krawiec, John McCall, Nelishia Pillay, Kevin Sim, Jim Smith, Thomas Stutzle, Eric Taillard and Stefan Wagner. J. Swan acknowledges the support of UK EPSRC grant EP/J017515/1 and the EU H2020 SAFIRE Factories project. P. GarciaSanchez and J. J. Merelo acknowledges the support of TIN201785727-C4-2-P by the Spanish Ministry of Economy and Competitiveness. M. Wagner acknowledges the support of the Australian Research Council grants DE160100850 and DP200102364.Following decades of sustained improvement, metaheuristics are one of the great success stories of opti- mization research. However, in order for research in metaheuristics to avoid fragmentation and a lack of reproducibility, there is a pressing need for stronger scientific and computational infrastructure to sup- port the development, analysis and comparison of new approaches. To this end, we present the vision and progress of the Metaheuristics “In the Large”project. The conceptual underpinnings of the project are: truly extensible algorithm templates that support reuse without modification, white box problem descriptions that provide generic support for the injection of domain specific knowledge, and remotely accessible frameworks, components and problems that will enhance reproducibility and accelerate the field’s progress. We argue that, via such principled choice of infrastructure support, the field can pur- sue a higher level of scientific enquiry. We describe our vision and report on progress, showing how the adoption of common protocols for all metaheuristics can help liberate the potential of the field, easing the exploration of the design space of metaheuristics.UK Research & Innovation (UKRI)Engineering & Physical Sciences Research Council (EPSRC) EP/J017515/1EU H2020 SAFIRE Factories projectSpanish Ministry of Economy and Competitiveness TIN201785727-C4-2-PAustralian Research Council DE160100850 DP20010236

Particle swarm optimization for the Steiner tree in graph and delay-constrained multicast routing problems

This paper presents the first investigation on applying a particle swarm optimization (PSO) algorithm to both the Steiner tree problem and the delay constrained multicast routing problem. Steiner tree problems, being the underlining models of many applications, have received significant research attention within the meta-heuristics community. The literature on the application of meta-heuristics to multicast routing problems is less extensive but includes several promising approaches. Many interesting research issues still remain to be investigated, for example, the inclusion of different constraints, such as delay bounds, when finding multicast trees with minimum cost. In this paper, we develop a novel PSO algorithm based on the jumping PSO (JPSO) algorithm recently developed by Moreno-Perez et al. (Proc. of the 7th Metaheuristics International Conference, 2007), and also propose two novel local search heuristics within our JPSO framework. A path replacement operator has been used in particle moves to improve the positions of the particle with regard to the structure of the tree. We test the performance of our JPSO algorithm, and the effect of the integrated local search heuristics by an extensive set of experiments on multicast routing benchmark problems and Steiner tree problems from the OR library. The experimental results show the superior performance of the proposed JPSO algorithm over a number of other state-of-the-art approaches