The feeding of American plaice (Hippoglossoides platessoides), Redfish (Sebastes marinus) and Cod (Gadus morhua) in the Flemish Cap during July 1988

A randomly stratified bottom-trawl survey was realized in the Flemish Cap (NAFO Div. 3M) in July 1988. The stomach contents of three species were studied: 320 of American plaice (Hippoglossoides platessoides), 203 of redfish (Sebastes Marinus) and 468 of cod (Gadus morhua). The cod specimens were classified taking into account age groups; in the case of other species by length classes. The food items, the prey occurrence index and the diversity index were determined too. The Schoener overlap index was calculated to study the intraspecific diet overlap in cod and the interspecific diet overlap between the three species. The relation between predator size (cod) and prey size (redfish) was also studied

Binding Potassium to Improve Treatment With Renin-Angiotensin-Aldosterone System Inhibitors: Results From Multiple One-Stage Pairwise and Network Meta-Analyses of Clinical Trials.

This manuscript presents findings from the first dichotomous data pooling analysis on clinical trials (CT) regarding the effectiveness of binding potassium. The results emanated from pairwise and network meta-analyses aiming evaluation of response to commercial potassium-binding polymers, that is, to achieve and maintain normal serum potassium (n = 1,722), and the association between this response and an optimal dosing of renin-angiotensin-aldosterone system inhibitors (RAASi) needing individuals affected by heart failure (HF) or resistant hypertension, who may be consuming other hyperkalemia-inducing drugs (HKID) (e.g., β-blockers, heparin, etc.), and frequently are affected by chronic kidney disease (CKD) (n = 1,044): According to the surface under the cumulative ranking area (SUCRA), sodium zirconium cyclosilicate (SZC) (SUCRA >0.78), patiromer (SUCRA >0.58) and sodium polystyrene sulfonate (SPS) (SUCRA <0.39) were different concerning their capacity to achieve normokalemia (serum potassium level (sK+) 3.5-5.0 mEq/L) or acceptable kalemia (sK+ ≤ 5.1 mEq/L) in individuals with hyperkalemia (sK+ >5.1 mEq/L), and, when normokalemia is achieved, patiromer 16.8-25.2 g/day (SUCRA = 0.94) and patiromer 8.4-16.8 g/day (SUCRA = 0.41) can allow to increase the dose of spironolactone up to 50 mg/day in subjects affected by heart failure (HF) or with resistant hypertension needing treatment with other RAASi. The potential of zirconium cyclosilicate should be explored further, as no data exists to assess properly its capacity to optimize dosing of RAASi, contrarily as it occurs with patiromer. More research is also necessary to discern between benefits of binding potassium among all type of hyperkalemic patients, for example, patients with DM who may need treatment for proteinuria, patients with early hypertension, etc. Systematic Review Registration:https://www.crd.york.ac.uk/PROSPERO/, identifier: CRD42020185614, CRD42020185558, CRD42020191430

Performance evaluation of a multiscale modelling system applied to particulate matter dispersion in a real traffic hot spot in Madrid (Spain)

Urban air pollution is one of the most important environmental problems nowadays. Understanding urban pollution is rather challenging due to different factors that produce a strongly heterogeneous pollutant distribution within streets. Observed concentrations depend on processes occurring at a wide range of spatial and temporal scales, complex wind flow and turbulence patterns induced by urban obstacles and irregular traffic emissions. The main objective of this paper is to model particulate matter dispersion at microscale while considering the effects of mesoscale processes. Computational Fluid Dynamic (CFD) PM10 simulations were performed taking into account high spatial resolution traffic emissions from a microscale traffic model and inlet vertical profiles of meteorological variables from Weather Research and Forecasting (WRF) model. This modelling system is evaluated by using meteorological and PM10 concentration data from intensive experimental campaigns carried out on 25th February and 6th July, 2015 in a real urban traffic hot-spot in Madrid. The effect of uncertainties in the inlet profiles from mesoscale input data on microscale results is assessed. Additionally, the importance of the sensible surface heat fluxes (SHF) provided by WRF and the selection of an appropriate turbulent Schmidt number in the dispersion equation are investigated. The main conclusion is that the modelling system accurately reproduces PM10 dispersion imposing appropriate inputs (meteorological variables and SHF) and a suitable turbulent Schmidt number. Better agreement is found for simulation with a low turbulent Schmidt number. This approach improves the standard microscale modelling alone because more realistic boundary conditions and mesoscale processes are considered

Geoelectrical and electromagnetic methods applied to paleolimnological studies: Two examples from desiccated lakes in the Basin of Mexico

Paleolimnological studies require a broad understanding of the geometry and depth of the sedimentary fill of lake basins prior to coring campaigns. Seismic methods are routinely employed for the indirect characterization of lake-bottom sediments. However, the use of seismic methods might occasionally be limited due to surface conditions or poor seismic contrasts between the stratigraphic units, which lead to data quality that is too poor to provide sufficient information for the selection of drill sites. Sources of cultural noise are one of the main reasons why seismic methods fail in study areas near or within large cities, such as Mexico City. Under certain conditions, electrical and electromagnetic methods might be a suitable substitute or complement to seismic exploration, as they respond to different physical properties of the subsurface. To evaluate the applicability of such methods, here we present two recent case studies from the desiccated lakes Chalco and Xochimilco both located in urban areas within the Basin of Mexico where electrical resistivity tomography (ERT), transient electromagnetic (TEM) and magnetotelluric (MT) soundings were conducted for the characterization of lake basement and lacustrine sediments. In both examples, the results of the geophysical exploration contributed valuable stratigraphic information for the following drilling and core recovery, which highlights the potential of electrical and electromagnetic methods in paleolimnological studies

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

Search for dark matter produced in association with a hadronically decaying vector boson in pp collisions at sqrt (s) = 13 TeV with the ATLAS detector

A search is presented for dark matter produced in association with a hadronically decaying W or Z boson using 3.2 fb−1 of pp collisions at View the MathML sources=13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Events with a hadronic jet compatible with a W or Z boson and with large missing transverse momentum are analysed. The data are consistent with the Standard Model predictions and are interpreted in terms of both an effective field theory and a simplified model containing dark matter

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements

Search for resonances in the mass distribution of jet pairs with one or two jets identified as b-jets in proton–proton collisions at √s=13TeV with the ATLAS detector

Searches for high-mass resonances in the dijet invariant mass spectrum with one or two jets identi-fied as b-jets are performed using an integrated luminosity of 3.2fb−1of proton–proton collisions with a centre-of-mass energy of √s=13TeVrecorded by the ATLAS detector at the Large Hadron Collider. Noevidence of anomalous phenomena is observed in the data, which are used to exclude, at 95%credibility level, excited b∗quarks with masses from 1.1TeVto 2.1TeVand leptophobic Z bosons with masses from 1.1TeVto 1.5TeV. Contributions of a Gaussian signal shape with effective cross sections ranging from approximately 0.4 to 0.001pb are also excluded in the mass range 1.5–5.0TeV