283 research outputs found

    Using natural means to reduce surface transport noise during propagation outdoors

    Get PDF
    This paper reviews ways of reducing surface transport noise by natural means. The noise abatement solutions of interest can be easily (visually) incorporated in the landscape or help with greening the (sub)urban environment. They include vegetated surfaces (applied to faces or tops of noise walls and on building façades and roofs ), caged piles of stones (gabions), vegetation belts (tree belts, shrub zones and hedges), earth berms and various ways of exploiting ground-surface-related effects. The ideas presented in this overview have been tested in the laboratory and/or numerically evaluated in order to assess or enhance the noise abatement they could provide. Some in-situ experiments are discussed as well. When well-designed, such natural devices have the potential to abate surface transport noise, possibly by complementing and sometimes improving common (non-green) noise reducing devices or measures. Their applicability strongly depends on the available space reserved for the noise abatement and the receiver position

    The low-density/high-density liquid phase transition for model globular proteins

    Full text link
    The effect of molecule size (excluded volume) and the range of interaction on the surface tension, phase diagram and nucleation properties of a model globular protein is investigated using a combinations of Monte Carlo simulations and finite temperature classical Density Functional Theory calculations. We use a parametrized potential that can vary smoothly from the standard Lennard-Jones interaction characteristic of simple fluids, to the ten Wolde-Frenkel model for the effective interaction of globular proteins in solution. We find that the large excluded volume characteristic of large macromolecules such as proteins is the dominant effect in determining the liquid-vapor surface tension and nucleation properties. The variation of the range of the potential only appears important in the case of small excluded volumes such as for simple fluids. The DFT calculations are then used to study homogeneous nucleation of the high-density phase from the low-density phase including the nucleation barriers, nucleation pathways and the rate. It is found that the nucleation barriers are typically only a few kBTk_{B}T and that the nucleation rates substantially higher than would be predicted by Classical Nucleation Theory.Comment: To appear in Langmui

    Permeable biosorbent barrier for wastewater remediation

    Get PDF
    Chromium is one of the heavy metals that significantly affect water quality in Mongolia. The present study is focused on the remediation of surface water contaminated with chromium (III) by a permeable barrier in order to prevent sediment pollution. The adsorption capacity of the selected materials (13X zeolite and vermiculite) was investigated at different sorbent dosages, pH and initial Cr(III) concentration. The equilibrium adsorption studies showed that vermiculite has a higher Cr(III) removal efficiency in comparison with 13X zeolite. A fungal isolate obtained from the sediment samples collected near Tuul River (Mongolia) was selected from enriched Luria-Bertani medium, showing a good performance for Cr(III) removal (78.2\% for an initial concentration of 50 mg/L). The fungal isolate was genetically typed by DNA sequencing and was identified as belonging to the Alternaria alternata species. 13X zeolite showed the best performance for Cr removal in the permeable barrier assays compared to vermiculite, achieving a total removal of 96\\% and a global uptake of 2.49 mg/g. After 13 days of operation none of the barriers reached saturation with chromium.A previous version of the paper has been presented in the 2nd EWaS International Conference: BEfficient & Sustainable Water Systems Management toward Worth Living Development^, Chania, Crete, Greece, 1-4 June 2016. This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund under the scope of Norte2020 - Programa Operacional Regional do Norte. Bruna Silva is thankful to the FCT for the concession of a Post-Doc grant (SFRH/BPD/112354/2015). Sampling process was supported by the collaborative research grant of National Academy of Sciences of Taiwan and Science and Technology Foundation of Mongolia, project code NCS-NECS2013003 and co-funded by the Young Scientist Grant (SEAS-2015075) of National University of Mongolia. E. Tuuguu would like to acknowledge the Erasmus-Mundus AREAS+ program for the opportunity to conduct research at CEB-University of Minho.info:eu-repo/semantics/publishedVersio

    An Analysis of the Atmospheric Propagation of Underground-Explosion-Generated Infrasonic Waves Based on the Equations of Fluid Dynamics: Ground Recordings

    Get PDF
    An investigation on the propagation of underground-explosion-generated infrasonic waves is carried out via numerical simulations of the equations of fluid dynamics. More specifically, the continuity, momentum, and energy conservation equations are solved along with the Herzfeld-Rice equations in order to take into account the effects of vibrational relaxation phenomena. The radiation of acoustic energy by the ground motion caused by underground explosions is initiated by enforcing the equality, at ground level, between the component of the air velocity normal to the Earth\u27s surface and the normal velocity of the ground layer. The velocity of the ground layer is defined semi-empirically as a function of the depth of burial and of the yield. The effects of the depth and of the source energy on the signals recorded in the epicentral zone are first discussed. The tropospheric and stratospheric infrasonic phases traveling at a long-range are then analyzed and explained. Synthesized ground waveforms are finally discussed and compared to those recorded at the I45RU station of the International Monitoring System after the 2013 North-Korean test. Good agreement is found between numerical results and experimental data, which motivates the use of infrasound technologies alongside seismic techniques for the characterization of underground explosions

    Effects of mineral amendments on trace elements leaching from pre-treated marine sediment after simulated rainfall events

    Get PDF
    Bauxite extraction by-products (red mud) were used to evaluate their potential ability to stabilize trace elements from dredged and aerated/humidified marine sediment. The investigated by-products were: bauxaline®(BX) that is a press-filtered red mud; bauxsol™(BS) that is a press-filtered red mud previously washed with excess of seawater, and gypsum neutralized bauxaline® (GBX). These materials were separately mixed to dredged composted sediment sample considering 5% and 20% sediment: stabilizer ratios. For pilot experiments, rainfall events were regularly simulated for 3 months. Concentrations of As, Mo, Cd, Cr, Zn, Cu, and Ni were analyzed in collected leachates as well as toxicity. Results showed that Cd, Mo, Zn, and Cu were efficiently stabilized in the solid matrix when 20% of BX, BS, and GBX was applied. Consequently, toxicity of leachates was lower than for the untreated sediment, meaning that contaminants mobility was reduced. A 5% GBX was also efficient for Mo, Zn and Cu stabilization. In all scenarios, As stabilization was not improved. Compared to all other monitored elements, Mo mobility seemed to depend upon temperature-humidity conditions during pilot experiments suggesting the need of further investigations

    CO2 seawater acidification by CCS-simulated leakage: kinetic modelling of Zn, Pb, Cd, Ni, Cr, Cu and As release from contaminated estuarine sediment using pH-static leaching tests

    Get PDF
    A modified pH-dependent leaching test with continuous pH control that employed CO2 to acidify a seawater-sediment mixture is used to address Zn, Pb, Cd, Ni, Cr, Cu and As release from contaminated estuarine sediments under the influence of acidification processes. Long-term (480 h) leaching experiments at pH values of 7.0, 6.5 and 6.0 are performed. The different evolutionary patterns of the redox potential and Fe release at pH = 6 with respect to the other pH values shows the need to assess the influence of the initial Fe content in seawater upon elemental release. Hence, assays at pH = 6.0 are conducted using natural seawater with Fe concentrations between 9.02 and 153 µg/L. A set of in-series reactions for trace elements, Fe and other ions associated with Fe is proposed to model a Fe/multi-ion-dependent mechanism for trace metal release. The maximum concentration of each contaminant that can be released from the sediment and the kinetic parameters of the proposed model are completed for the studied pH values, for good consistency between the experimental and simulated mobilisation of each studied element.This work was financially supported by the Spanish Ministry of Economy and Competitiveness, Project CTM 2011-28437-C02-01, ERDF included. M.C. Martín-Torre was funded by the Spanish Ministry of Economy and Competitiveness by means of F.P.I. fellowship No. BES-2012-053816

    Medical physics staffing for radiation oncology: a decade of experience in Ontario, Canada.

    Get PDF
    The January 2010 articles in The New York Times generated intense focus on patient safety in radiation treatment, with physics staffing identified frequently as a critical factor for consistent quality assurance. The purpose of this work is to review our experience with medical physics staffing, and to propose a transparent and flexible staffing algorithm for general use. Guided by documented times required per routine procedure, we have developed a robust algorithm to estimate physics staffing needs according to center-specific workload for medical physicists and associated support staff, in a manner we believe is adaptable to an evolving radiotherapy practice. We calculate requirements for each staffing type based on caseload, equipment inventory, quality assurance, educational programs, and administration. Average per-case staffing ratios were also determined for larger-scale human resource planning and used to model staffing needs for Ontario, Canada over the next 10 years. The workload specific algorithm was tested through a survey of Canadian cancer centers. For center-specific human resource planning, we propose a grid of coefficients addressing specific workload factors for each staff group. For larger scale forecasting of human resource requirements, values of 260, 700, 300, 600, 1200, and 2000 treated cases per full-time equivalent (FTE) were determined for medical physicists, physics assistants, dosimetrists, electronics technologists, mechanical technologists, and information technology specialists, respectively
    • …
    corecore