Analysis of Metallic Shielding for Reduction of RF Induced Heating of Electrode During MRI for Active Implants

The options available to patients with implantable devices are limited. It is because there are multiple interactions between the MRI environment and the implantable medical devices. The three main components of MRI systems- static magnet, RF coil, and a gradient coil- interact with the implantable medical devices. These interactions can cause force, torque, device vibrations and RF-induced heating. Among all these potential hazards is the heating caused by the RF electromagnetic field. The lead wires of the implants can act as antennas and pick up the electric field generated by the RF coil. This results in the induced current traveling along the length of the device that will dissipate as heat where it is coupled to tissue. The combination of critically sensitive tissues and high heat makes this interaction the most significant risk for patient safety. Hence, there arises a need to design effective techniques that can minimize RF heating induced during an MRI. The technique of shielding has been proven to reduce RF-induced heating. The focus of current research is to provide analysis of shielding technique for reduction of RF-induced heating of electrodes during MRI. Shielded leads have been developed as a method to reduce RF-heating responsible for temperature rise at the electrodes. The purpose of this work is to provide a quantitative understanding of how a conducting metallic shield over a lead will reduce RF heating at the electrode during MRI scans. A physical model and equations for reduction of RF heating by a shielded lead are presented. Temperature rises are calculated for different lengths of shielded and unshielded leads. Confirming measurements are made for a quarter-wavelength coaxial cable model of the lead. Measured temperature rise and transfer function depended on terminations conditions, with the shorted lead exhibiting the temperature rise sixteen times less than an open-ended lead. The information provided by this work is expected to facilitate the development of lead wires with reduced RF-induced heating. The availability of lead wires with reduced heating will allow expanded access to MRI by patients with implantable devices

Transient Analysis of Primary Feed Pump Trip for 700 MWe IPHWR

700 MWe Indian Pressurized Heavy Water Reactor (IPHWR) is a horizontal channel type reactor with two loops of Primary Heat Transport (PHTS) system. Three (two operating and one stand by) main boiler feed water pumps (BFP) supply feed water to Steam Generators (SGs). In the event of one of the running BFP trip, standby comes on line on auto. Transient analysis for this event is performed using in- house computer code ATMIKA.T .The transient has been initiated by tripping one of the pumps. Two cases are postulated: 1: BFP Trip and Standby BFP available on auto 2: BFP Trip and Standby pump not available. This paper provides timelines of following sequence of events which is important for operator’s action to maneuver the event, and the main findings of the study are: Following the tripping of one BFP, feed flow reduces and SGs level start falling. As SGs level fall, feed control valves open up in level control mode and system resistance in feed water circuit reduces. If the standby pump comes on auto, the SGs level recovers with a slight dip in level. The feed flow increases and settles down to normal value. Subsequently all the parameters converge to steady state value. Reactor continues to operate at 100% FP. In the event of main BFP trip without the availability of standby BFP, feed flow rate drops. SGs pressure rise slightly due to reduction in sub cooled feed flow and SGs level start to decrease. Reactor setback starts as SG level goes below set back limit. SG level continues to fall and reactor trips on SG Level very very low trip setting

Prevalence, Distribution and Functional Significance of the −237C to T Polymorphism in the IL-12Rβ2 Promoter in Indian Tuberculosis Patients

Cytokine/cytokine receptor gene polymorphisms related to structure/expression could impact immune response. Hence, the −237 polymorphic site in the 5′ promoter region of the IL-12Rβ2 (SNP ID: rs11810249) gene associated with the AP-4 transcription motif GAGCTG, was examined. Amplicons encompassing the polymorphism were generated from 46 pulmonary tuberculosis patients, 35 family contacts and 28 miscellaneous volunteers and sequenced. The C allele predominated among patients, (93.4%, 43/46), and in all volunteers and contacts screened, but the T allele was exclusively limited to patients, (6.5%, 3/46). The functional impact of this polymorphism on transcriptional activity was assessed by Luciferase-reporter and electrophoretic mobility shift assays (EMSA). Luciferase-reporter assays showed a significant reduction in transcriptional efficiency with T compared to C allele. The reduction in transcriptional efficiency with the T allele construct (pGIL-12Rb2-T), in U-87MG, THP-1 and Jurkat cell lines, were 53, 37.6, and 49.8% respectively, compared to the C allele construct (pGIL-12Rb2-C). Similarly, densitometric analysis of the EMSA assay showed reduced binding of the AP-4 transcription factor, to T compared to the C nucleotide probe. Reduced mRNA expression in all patients (3/3) harboring the T allele was seen, whereas individuals with the C allele exhibited high mRNA expression (17/25; 68%, p = 0.05). These observations were in agreement with the in vitro assessment of the promoter activity by Luciferase-reporter and EMSA assays. The reduced expression of IL-12Rβ2 transcripts in 8 patients despite having the C allele was attributed to the predominant over expression of the suppressors (IL-4 and GATA-3) and reduced expression of enhancers (IFN-α) of IL-12Rβ2 transcripts. The 17 high IL-12Rβ2 mRNA expressers had significantly elevated IFN-α mRNA levels compared to low expressers and volunteers. Notwithstanding the presence of high levels of IL-12Rβ2 mRNA in these patients elevated IFN-α expression could modulate their immune responses to Mycobacterium tuberculosis

Deep phenotyping and genomic data from a nationally representative study on dementia in India

The Harmonized Diagnostic Assessment of Dementia for the Longitudinal Aging Study in India (LASI-DAD) is a nationally representative in-depth study of cognitive aging and dementia. We present a publicly available dataset of harmonized cognitive measures of 4,096 adults 60 years of age and older in India, collected across 18 states and union territories. Blood samples were obtained to carry out whole blood and serum-based assays. Results are included in a venous blood specimen datafile that can be linked to the Harmonized LASI-DAD dataset. A global screening array of 960 LASI-DAD respondents is also publicly available for download, in addition to neuroimaging data on 137 LASI-DAD participants. Altogether, these datasets provide comprehensive information on older adults in India that allow researchers to further understand risk factors associated with cognitive impairment and dementia.Peer reviewe

Insect pathogens as biological control agents: back to the future

The development and use of entomopathogens as classical, conservation and augmentative biological control agents have included a number of successes and some setbacks in the past 15 years. In this forum paper we present current information on development, use and future directions of insect-specific viruses, bacteria, fungi and nematodes as components of integrated pest management strategies for control of arthropod pests of crops, forests, urban habitats, and insects of medical and veterinary importance. Insect pathogenic viruses are a fruitful source of MCAs, particularly for the control of lepidopteran pests. Most research is focused on the baculoviruses, important pathogens of some globally important pests for which control has become difficult due to either pesticide resistance or pressure to reduce pesticide residues. Baculoviruses are accepted as safe, readily mass produced, highly pathogenic and easily formulated and applied control agents. New baculovirus products are appearing in many countries and gaining an increased market share. However, the absence of a practical in vitro mass production system, generally higher production costs, limited post application persistence, slow rate of kill and high host specificity currently contribute to restricted use in pest control. Overcoming these limitations are key research areas for which progress could open up use of insect viruses to much larger markets. A small number of entomopathogenic bacteria have been commercially developed for control of insect pests. These include several Bacillus thuringiensis sub-species, Lysinibacillus (Bacillus) sphaericus, Paenibacillus spp. and Serratia entomophila. B. thuringiensis sub-species kurstaki is the most widely used for control of pest insects of crops and forests, and B. thuringiensis sub-species israelensis and L. sphaericus are the primary pathogens used for medically important pests including dipteran vectors,. These pathogens combine the advantages of chemical pesticides and microbial control agents (MCAs): they are fast acting, easy to produce at a relatively low cost, easy to formulate, have a long shelf life and allow delivery using conventional application equipment and systemics (i.e. in transgenic plants). Unlike broad spectrum chemical pesticides, B. thuringiensis toxins are selective and negative environmental impact is very limited. Of the several commercially produced MCAs, B. thuringiensis (Bt) has more than 50% of market share. Extensive research, particularly on the molecular mode of action of Bt toxins, has been conducted over the past two decades. The Bt genes used in insect-resistant transgenic crops belong to the Cry and vegetative insecticidal protein families of toxins. Bt has been highly efficacious in pest management of corn and cotton, drastically reducing the amount of broad spectrum chemical insecticides used while being safe for consumers and non-target organisms. Despite successes, the adoption of Bt crops has not been without controversy. Although there is a lack of scientific evidence regarding their detrimental effects, this controversy has created the widespread perception in some quarters that Bt crops are dangerous for the environment. In addition to discovery of more efficacious isolates and toxins, an increase in the use of Bt products and transgenes will rely on innovations in formulation, better delivery systems and ultimately, wider public acceptance of transgenic plants expressing insect-specific Bt toxins. Fungi are ubiquitous natural entomopathogens that often cause epizootics in host insects and possess many desirable traits that favor their development as MCAs. Presently, commercialized microbial pesticides based on entomopathogenic fungi largely occupy niche markets. A variety of molecular tools and technologies have recently allowed reclassification of numerous species based on phylogeny, as well as matching anamorphs (asexual forms) and teleomorphs (sexual forms) of several entomopathogenic taxa in the Phylum Ascomycota. Although these fungi have been traditionally regarded exclusively as pathogens of arthropods, recent studies have demonstrated that they occupy a great diversity of ecological niches. Entomopathogenic fungi are now known to be plant endophytes, plant disease antagonists, rhizosphere colonizers, and plant growth promoters. These newly understood attributes provide possibilities to use fungi in multiple roles. In addition to arthropod pest control, some fungal species could simultaneously suppress plant pathogens and plant parasitic nematodes as well as promote plant growth. A greater understanding of fungal ecology is needed to define their roles in nature and evaluate their limitations in biological control. More efficient mass production, formulation and delivery systems must be devised to supply an ever increasing market. More testing under field conditions is required to identify effects of biotic and abiotic factors on efficacy and persistence. Lastly, greater attention must be paid to their use within integrated pest management programs; in particular, strategies that incorporate fungi in combination with arthropod predators and parasitoids need to be defined to ensure compatibility and maximize efficacy. Entomopathogenic nematodes (EPNs) in the genera Steinernema and Heterorhabditis are potent MCAs. Substantial progress in research and application of EPNs has been made in the past decade. The number of target pests shown to be susceptible to EPNs has continued to increase. Advancements in this regard primarily have been made in soil habitats where EPNs are shielded from environmental extremes, but progress has also been made in use of nematodes in above-ground habitats owing to the development of improved protective formulations. Progress has also resulted from advancements in nematode production technology using both in vivo and in vitro systems; novel application methods such as distribution of infected host cadavers; and nematode strain improvement via enhancement and stabilization of beneficial traits. Innovative research has also yielded insights into the fundamentals of EPN biology including major advances in genomics, nematode-bacterial symbiont interactions, ecological relationships, and foraging behavior. Additional research is needed to leverage these basic findings toward direct improvements in microbial control

Diagnostic molecular biomarkers for malignant pleural effusions

Malignant pleural effusions (MPEs) are a common and important cause of cancer-related mortality and morbidity. Prompt diagnosis using minimally invasive tests is important because the median survival after diagnosis is only 4-9 months. Pleural fluid cytology is pivotal to current MPE diagnostic algorithms but has limited sensitivity (30-60%). Consequently, many patients need to undergo invasive diagnostic tests such as thoracoscopic pleural biopsy. Recent genomic, transcriptomic, methylation and proteomic studies on cells within pleural effusions have identified novel molecular diagnostic biomarkers that demonstrate potential in complementing cytology in the diagnosis of MPEs. Several challenges will need to be addressed prior to the incorporation of these molecular tests into routine clinical diagnosis, including validation of molecular diagnostic markers in well-designed prospective, comparative and cost-effectiveness studies. Ultimately, minimally invasive diagnostic tests that can be performed quickly will enable clinicians to provide the most effective therapies for patients with MPEs in a timely fashion