Evaluation Of TRIMARC Procurement Procedures (Interim Report)

Innovative practices in construction contracting techniques have become more frequent and necessary in recent years. These practices benefit the transportation industry by experimenting with methods different from the traditional methods. This allows for growth and the adoption of procedures that provide higher quality and a better benefit to cost ratio. An Advanced Traffic Management System (ATMS), referred to as TRIMARC (Traffic Response and Incident Management Assisting the River Cities), was installed in the Louisville, Kentucky and southern Indiana area. A system integrator approach was used for the installation, operation, and maintenance of this system. Special Experimental Project No. 14 (SEP-14) procedures were used to procure the services of the equipment installation contractor. An evaluation was conducted to determine the effectiveness of the process approved for this procurement. This evaluation was accomplished by review of documentation related to the TRIMARC project including contracts, memorandums, and proposals. Also, input was received from the principal participants in the project including representatives of the Kentucky Transportation Cabinet, HNTB, Spartan Construction Company, and TRW, Inc. The SEP-14 process is an innovative means of procuring projects that may be uncharacteristic to the traditional projects normally encountered by highway departments. SEP-14 provides states an opportunity to use and evaluate the contractual arrangements when an alternate process is more beneficial than the traditional processes. After some time period, this alternate process may be evaluated by the Federal Highway Administration to determine if it should be classified operational instead of experimental. The evaluation on the TRIMARC project\u27s use of the system integrator and SEP-14 bidding practices has been very positive. The project has encountered some delays; however, it is progressing in a manner that is satisfactory to all parties involved. The overall project has been received positively and the contract is now being extended to include a larger area for the incident management program. The SEP-14 process has provided the system integrator more flexibility and has allowed the procurement of the equipment and services to be based on criteria other than cost. This has allowed the system integrator to receive the specific equipment desired and to contract for the equipment installation from a contractor that had previous experience with similar projects resulting in time and cost savings to Kentucky and Indiana

Long-Term Monitoring of Experimental Features, Subtask 2: Alexandria-Ashland Highway (KY 9) Pavement Performance Monitoring

Construction on the AA Highway began in late 1985 and was completed in late 1990. Prior to construction, 30 different test sections had been designed into the highway for evaluation. The test sections contain 23 different characteristic qualities and different segment lengths. The segment lengths range from 1.28 to 9.13 miles and took one and a half to four years to complete each segment. The sections were constructed from various pavement and shoulder designs. The designs are varied by parameters such as the type of subgrade stabilization, drainage type, surface class, surface aggregate, and more. The purpose for monitoring the performance of the AA Highway is to compare the different design types to determine the most feasible, long-lasting design available. There are several factors that impact the long term performance of the pavement. These include the volume of traffic, the classification of traffic, ESAL (equivalent single axle load), and environmental factors. Therefore, the performance of the pavement can not be entirely dependent on the design. The pavement performance was monitored periodically since construction through 1999. Falling weight deflectometer (FWD) measurements were made, distress surveys were conducted, and rideability data was collected from the Pavement Management Branch of the Division of Operations. Cracking of all types was the most prevalent form of distress in all the sections. Raveling was the second most prominent distress. Much of these distresses were associated with crushed gravel surfaces. There was less cracking and raveling on sections that were paved with crushed limestone surface mixtures

Optimizing the post-graduate institutional program evaluation process

Abstract Background Reviewing program educational efforts is an important component of postgraduate medical education program accreditation. The post-graduate review process has evolved over time to include centralized oversight based on accreditation standards. The institutional review process and the impact on participating faculty are topics not well described in the literature. Methods We conducted multiple Plan-Do-Study-Act (PDSA) cycles to identify and implement areas for change to improve productivity in our institutional program review committee. We also conducted one focus group and six in-person interviews with 18 committee members to explore their perspectives on the committee’s evolution. One author (MLL) reviewed the transcripts and performed the initial thematic coding with a PhD level research associate and identified and categorized themes. These themes were confirmed by all participating committee members upon review of a detailed summary. Emergent themes were triangulated with the University of Michigan Medical School’s Admissions Executive Committee (AEC). Results We present an overview of adopted new practices to the educational program evaluation process at the University of Michigan Health System that includes standardization of meetings, inclusion of resident members, development of area content experts, solicitation of committed committee members, transition from paper to electronic committee materials, and focus on continuous improvement. Faculty and resident committee members identified multiple improvement areas including the ability to provide high quality reviews of training programs, personal and professional development, and improved feedback from program trainees. Conclusions A standing committee that utilizes the expertise of a group of committed faculty members and which includes formal resident membership has significant advantages over ad hoc or other organizational structures for program evaluation committees.http://deepblue.lib.umich.edu/bitstream/2027.42/117363/1/12909_2016_Article_586.pd

Determinants for a low health-related quality of life in asthmatics

People with asthma suffer from impaired health-related quality of life (HRQL), but the determinants of HRQL among asthmatics are not completely understood. The aim of this investigation was to study determinants of low HRQL in asthmatics and to study whether the determinants of HRQL differ between sexes and age groups. A cohort of three age groups in Sweden was investigated in 1990 using a questionnaire with focus on respiratory symptoms. To study quality of life, the generic instrument Gothenburg Quality of Life was used. The participants were also investigated with interviews, spirometry, and allergy testing. Asthma was diagnosed in 616 subjects. Fifty-eight per cent (n = 359) of the subjects were women; and 24% were smokers, 22% ex-smokers, and 54% were non-smokers. Women were more likely than men to report poor health-related quality of life. Respiratory symptoms severity was another independent determinant of a lower quality of life as well as airway responsiveness to irritants. Current and former smokers also reported lower quality of life. Finally, absenteeism from school and work was associated with lower quality of life. Factors such as sex, smoking habits, airway responsiveness to irritants, respiratory symptom severity, allergy, and absenteeism from school and work were associated with low HRQL in asthmatics

The genomes of two key bumblebee species with primitive eusocial organization

Background: The shift from solitary to social behavior is one of the major evolutionary transitions. Primitively eusocial bumblebees are uniquely placed to illuminate the evolution of highly eusocial insect societies. Bumblebees are also invaluable natural and agricultural pollinators, and there is widespread concern over recent population declines in some species. High-quality genomic data will inform key aspects of bumblebee biology, including susceptibility to implicated population viability threats. Results: We report the high quality draft genome sequences of Bombus terrestris and Bombus impatiens, two ecologically dominant bumblebees and widely utilized study species. Comparing these new genomes to those of the highly eusocial honeybee Apis mellifera and other Hymenoptera, we identify deeply conserved similarities, as well as novelties key to the biology of these organisms. Some honeybee genome features thought to underpin advanced eusociality are also present in bumblebees, indicating an earlier evolution in the bee lineage. Xenobiotic detoxification and immune genes are similarly depauperate in bumblebees and honeybees, and multiple categories of genes linked to social organization, including development and behavior, show high conservation. Key differences identified include a bias in bumblebee chemoreception towards gustation from olfaction, and striking differences in microRNAs, potentially responsible for gene regulation underlying social and other traits. Conclusions: These two bumblebee genomes provide a foundation for post-genomic research on these key pollinators and insect societies. Overall, gene repertoires suggest that the route to advanced eusociality in bees was mediated by many small changes in many genes and processes, and not by notable expansion or depauperation

Supplement: "Localization and broadband follow-up of the gravitational-wave transient GW150914" (2016, ApJL, 826, L13)

This Supplement provides supporting material for Abbott et al. (2016a). We briefly summarize past electromagnetic (EM) follow-up efforts as well as the organization and policy of the current EM follow-up program. We compare the four probability sky maps produced for the gravitational-wave transient GW150914, and provide additional details of the EM follow-up observations that were performed in the different bands

Alignment of the CMS silicon tracker during commissioning with cosmic rays

This is the Pre-print version of the Article. The official published version of the Paper can be accessed from the link below - Copyright @ 2010 IOPThe CMS silicon tracker, consisting of 1440 silicon pixel and 15 148 silicon strip detector modules, has been aligned using more than three million cosmic ray charged particles, with additional information from optical surveys. The positions of the modules were determined with respect to cosmic ray trajectories to an average precision of 3–4 microns RMS in the barrel and 3–14 microns RMS in the endcap in the most sensitive coordinate. The results have been validated by several studies, including laser beam cross-checks, track fit self-consistency, track residuals in overlapping module regions, and track parameter resolution, and are compared with predictions obtained from simulation. Correlated systematic effects have been investigated. The track parameter resolutions obtained with this alignment are close to the design performance.This work is supported by FMSR (Austria); FNRS and FWO (Belgium); CNPq, CAPES, FAPERJ, and FAPESP (Brazil); MES (Bulgaria); CERN; CAS, MoST, and NSFC (China); COLCIENCIAS (Colombia); MSES (Croatia); RPF (Cyprus); Academy of Sciences and NICPB (Estonia); Academy of Finland, ME, and HIP (Finland); CEA and CNRS/IN2P3 (France); BMBF, DFG, and HGF (Germany); GSRT (Greece); OTKA and NKTH (Hungary); DAE and DST (India); IPM (Iran); SFI (Ireland); INFN (Italy); NRF (Korea); LAS (Lithuania); CINVESTAV, CONACYT, SEP, and UASLP-FAI (Mexico); PAEC (Pakistan); SCSR (Poland); FCT (Portugal); JINR (Armenia, Belarus, Georgia, Ukraine, Uzbekistan); MST and MAE (Russia); MSTDS (Serbia); MICINN and CPAN (Spain); Swiss Funding Agencies (Switzerland); NSC (Taipei); TUBITAK and TAEK (Turkey); STFC (United Kingdom); DOE and NSF (USA)

Commissioning and performance of the CMS pixel tracker with cosmic ray muons

This is the Pre-print version of the Article. The official published verion of the Paper can be accessed from the link below - Copyright @ 2010 IOPThe pixel detector of the Compact Muon Solenoid experiment consists of three barrel layers and two disks for each endcap. The detector was installed in summer 2008, commissioned with charge injections, and operated in the 3.8 T magnetic field during cosmic ray data taking. This paper reports on the first running experience and presents results on the pixel tracker performance, which are found to be in line with the design specifications of this detector. The transverse impact parameter resolution measured in a sample of high momentum muons is 18 microns.This work is supported by FMSR (Austria); FNRS and FWO (Belgium); CNPq, CAPES, FAPERJ, and FAPESP (Brazil); MES (Bulgaria); CERN; CAS, MoST, and NSFC (China); COLCIENCIAS (Colombia); MSES (Croatia); RPF (Cyprus); Academy of Sciences and NICPB (Estonia); Academy of Finland, ME, and HIP (Finland); CEA and CNRS/IN2P3 (France); BMBF, DFG, and HGF (Germany); GSRT (Greece); OTKA and NKTH (Hungary); DAE and DST (India); IPM (Iran); SFI (Ireland); INFN (Italy); NRF (Korea); LAS (Lithuania); CINVESTAV, CONACYT, SEP, and UASLP-FAI (Mexico); PAEC (Pakistan); SCSR (Poland); FCT (Portugal); JINR (Armenia, Belarus, Georgia, Ukraine, Uzbekistan); MST and MAE (Russia); MSTDS (Serbia); MICINN and CPAN (Spain); Swiss Funding Agencies (Switzerland); NSC (Taipei); TUBITAK and TAEK (Turkey); STFC (United Kingdom); DOE and NSF (USA)

Performance of the CMS drift-tube chamber local trigger with cosmic rays

The performance of the Local Trigger based on the drift-tube system of the CMS experiment has been studied using muons from cosmic ray events collected during the commissioning of the detector in 2008. The properties of the system are extensively tested and compared with the simulation. The effect of the random arrival time of the cosmic rays on the trigger performance is reported, and the results are compared with the design expectations for proton-proton collisions and with previous measurements obtained with muon beams