Visualization of security in industrial control systems respecting IEC-62443

The importance of visualizing security in industrial control systems respecting the IEC62443 security standards has increased. This is due to the increase in cyber attacks, its complexity over time, and the security standards created to protect users from compromising them. Through an adequate visualization of security information, it is possible to manage and analyze information to make decisions for good management of systems' security. In this sense, this study's main objective was to describe a possible solution to assist in security management, having been developed in partnership with Siemens Technology, based in Germany. Thus, appropriate tools were used and evaluated to model the data and create visual elements to represent the industrial control system's components. Their security attributes were chosen to be in a dashboard. Kibana was used for three case studies, the last one being the most important for Siemens. The data were obtained through the security software test tool. These were organized and treated to be in a configuration that allowed them to be imported into Kibana and create a dashboard containing the information needed to make decisions and discover gaps in the system. Subsequently, the proposed solution was evaluated through a questionnaire applied to the specialists responsible for industrial control systems security to obtain suggestions that would improve its usefulness and security management assistance. From the results obtained, it was possible to observe the security representation using a visualization tool, demonstrate compliance with IEC-62443 security protocols, thus enabling a simplified security analysis of an industrial control system.A importância de visualizar segurança em sistemas de controlo industrial respeitando as normas de segurança IEC-62443 tem vindo a aumentar. Isto deve-se, ao aumento dos ciberataques, da sua complexidade e das normas criadas para proteger os sistemas. Através de uma adequada visualização de informação sobre a segurança torna-se possível gerir e analisar a informação para tomar decisões e fazer uma boa gestão de segurança. O presente estudo teve como principal objetivo descrever uma solução possível para auxiliar na gestão de segurança tendo sido desenvolvida em parceria com Siemens Technology, sediada na Alemanha. Assim, recorreu-se à avaliação das ferramentas utilizadas para modelar dados e criar elementos visuais para representar os componentes num sistema de controlo industrial e os atributos de segurança escolhidos para estarem num "dashboard". O "Kibana" foi utilizado para três casos, sendo o último o mais importante para a Siemens. Os dados foram obtidos através da ferramenta de teste do software de segurança. Estes foram organizados e tratados de forma a criar um "dashboard" contendo a informação necessária para tomar decisões e descobrir lacunas no sistema. Posteriormente, a solução proposta foi avaliada através de um questionário aplicado aos especialistas de segurança de sistemas de controlo industrial, com o propósito de se obterem sugestões que permitissem melhorar a sua utilidade e assistência na gestão da segurança. Com os resultados obtidos foi possível observar a representação de segurança utilizando uma ferramenta de visualização, respeitando os protocolos de segurança IEC-62443, possibilitando, uma análise simplificada da segurança num sistema de controlo industrial

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Search for supersymmetry in events with one lepton and multiple jets in proton-proton collisions at root s=13 TeV

Peer reviewe

Search for anomalous couplings in boosted WW/WZ -> l nu q(q)over-bar production in proton-proton collisions at root s=8TeV

Peer reviewe

Measurement of the Splitting Function in &ITpp &ITand Pb-Pb Collisions at root&ITsNN&IT=5.02 TeV

Data from heavy ion collisions suggest that the evolution of a parton shower is modified by interactions with the color charges in the dense partonic medium created in these collisions, but it is not known where in the shower evolution the modifications occur. The momentum ratio of the two leading partons, resolved as subjets, provides information about the parton shower evolution. This substructure observable, known as the splitting function, reflects the process of a parton splitting into two other partons and has been measured for jets with transverse momentum between 140 and 500 GeV, in pp and PbPb collisions at a center-of-mass energy of 5.02 TeV per nucleon pair. In central PbPb collisions, the splitting function indicates a more unbalanced momentum ratio, compared to peripheral PbPb and pp collisions.. The measurements are compared to various predictions from event generators and analytical calculations.Peer reviewe

Inclusive Search for a Highly Boosted Higgs Boson Decaying to a Bottom Quark-Antiquark Pair

© 2018 CERN. An inclusive search for the standard model Higgs boson (H) produced with large transverse momentum (pT) and decaying to a bottom quark-antiquark pair (bb) is performed using a data set of pp collisions at s=13 TeV collected with the CMS experiment at the LHC. The data sample corresponds to an integrated luminosity of 35.9 fb-1. A highly Lorentz-boosted Higgs boson decaying to bb is reconstructed as a single, large radius jet, and it is identified using jet substructure and dedicated b tagging techniques. The method is validated with Z→bb decays. The Z→bb process is observed for the first time in the single-jet topology with a local significance of 5.1 standard deviations (5.8 expected). For a Higgs boson mass of 125 GeV, an excess of events above the expected background is observed (expected) with a local significance of 1.5 (0.7) standard deviations. The measured cross section times branching fraction for production via gluon fusion of H→bb with reconstructed pT > 450 GeV and in the pseudorapidity range -2.5 < η < 2.5 is 74±48(stat)-10+17(syst) fb, which is consistent within uncertainties with the standard model prediction

Search for new phenomena in final states with two opposite-charge, same-flavor leptons, jets, and missing transverse momentum in pp collisions at √s=13 TeV

Search results are presented for physics beyond the standard model in final states with two opposite-charge, same-flavor leptons, jets, and missing transverse momentum. The data sample corresponds to an integrated luminosity of 35.9 fb−1 of proton-proton collisions at s√=13 TeV collected with the CMS detector at the LHC in 2016. The analysis uses the invariant mass of the lepton pair, searching for a kinematic edge or a resonant-like excess compatible with the Z boson mass. The search for a kinematic edge targets production of particles sensitive to the strong force, while the resonance search targets both strongly and electroweakly produced new physics. The observed yields are consistent with the expectations from the standard model, and the results are interpreted in the context of simplified models of supersymmetry. In a gauge mediated supersymmetry breaking (GMSB) model of gluino pair production with decay chains including Z bosons, gluino masses up to 1500–1770 GeV are excluded at the 95% confidence level depending on the lightest neutralino mass. In a model of electroweak chargino-neutralino production, chargino masses as high as 610 GeV are excluded when the lightest neutralino is massless. In GMSB models of electroweak neutralino-neutralino production, neutralino masses up to 500-650 GeV are excluded depending on the decay mode assumed. Finally, in a model with bottom squark pair production and decay chains resulting in a kinematic edge in the dilepton invariant mass distribution, bottom squark masses up to 980–1200 GeV are excluded depending on the mass of the next-to-lightest neutralino

Search for electroweak production of charginos and neutralinos in multilepton final states in proton-proton collisions at root s=13 TeV

Results are presented from a search for the direct electroweak production of charginos and neutralinos in signatures with either two or more leptons (electrons or muons) of the same electric charge, or with three or more leptons, which can include up to two hadronically decaying tau leptons. The results are based on a sample of protonproton collision data collected at p s = 13TeV, recorded with the CMS detector at the LHC, corresponding to an integrated luminosity of 35.9 fb1. The observed event yields are consistent with the expectations based on the standard model. The results are interpreted in simpli ed models of supersymmetry describing various scenarios for the production and decay of charginos and neutralinos. Depending on the model parameters chosen, mass values between 180GeV and 1150 GeV are excluded at 95% CL. These results signi cantly extend the parameter space probed for these particles in searches at the LHC. In addition, results are presented in a form suitable for alternative theoretical interpretations.Sponsoring Consortium for Open Access Publishing in Particle Physic

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Measurements of the pp -> ZZ production cross section and the Z -> 4l branching fraction, and constraints on anomalous triple gauge couplings at root s=13TeV

Correction: DOI:10.1140/epjc/s10052-018-5769-1Four-lepton production in proton-proton collisions, pp -> (Z/gamma*)(Z/gamma*) -> 4l, where l = e or mu, is studied at a center-of-mass energy of 13 TeV with the CMS detector at the LHC. The data sample corresponds to an integrated luminosity of 35.9 fb(-1). The ZZ production cross section, sigma(pp -> ZZ) = 17.2 +/- 0.5 (stat) +/- 0.7 (syst) +/- 0.4 (theo) +/- 0.4 (lumi) pb, measured using events with two opposite-sign, same-flavor lepton pairs produced in the mass region 60 4l) = 4.83(-0.22)(+0.23) (stat)(-0.29)(+0.32) (syst) +/- 0.08 (theo) +/- 0.12(lumi) x 10(-6) for events with a four-lepton invariant mass in the range 80 4GeV for all opposite-sign, same-flavor lepton pairs. The results agree with standard model predictions. The invariant mass distribution of the four-lepton system is used to set limits on anomalous ZZZ and ZZ. couplings at 95% confidence level: -0.0012 <f(4)(Z) <0.0010, -0.0010 <f(5)(Z) <0.0013, -0.0012 <f(4)(gamma) <0.0013, -0.0012 <f(5)(gamma) <0.0013.Peer reviewe