Assessing the compressive and impact behavior of plastic safety toe caps through computational modelling

Toe caps are one of the most important components in safety footwear, but have a significant contribution to the weight of the shoe. Efforts have been made to replace steel toe caps by polymeric ones, since they are lighter, insulated and insensitive to magnetic fields. Nevertheless, polymeric solutions require larger volumes, which has a negative impact on the shoe’s aesthetics. Therefore, safety footwear manufacturers are pursuing the development of an easy, low-cost and reliable solution to optimize this component. In this work, a solid mechanics toolbox built in the open-source computational library, OpenFOAM®, was used to simulate two laboratory standard tests (15 kN compression and 200 J impact tests). To model the polymeric material behavior, a neo-Hookean hyper-elasto-plastic material law with J2 plastic criteria was employed. A commercially available plastic toe cap was characterized, and the collected data was used for assessment purposes. Close agreements, between experimental and simulated values, were achieved for both tests, with an approximate error of 5.4% and 6.8% for the displacement value in compression and impact test simulations, respectively. The results clearly demonstrate that the employed open-source finite volume computational models offer reliable results and can support the design of toe caps for the R&D footwear industry.This work was funded by FEDER funds through the COMPETE 2020 Programme and National Funds through FCT-Portuguese Foundation for Science and Technology under the projects UIDB/05256/2020; UIDP/05256/2020 and FAMEST-Footwear, Advanced Materials, Equipment’s and Software Technologies (POCI-01-0247-FEDER-024529)

Aprimorando a classificação semissupervisionada de séries temporais extraídas de imagens de satélite

A quantidade de dados gerados e armazenados tem crescido muito nos últimos anos, assim como o interesse na descoberta de conhecimento e extração de padrões em tais bases de dados. No entanto, em domínios como sensoriamento remoto, grandes volumes de dados complexos, por exemplo imagens de satélite, requerem uso de recursos computacionais para análise de dados. Nesse contexto, a classificação semissupervisionada é uma alternativa adequada para extração de conhecimento de conjuntos de dados com poucas instâncias previamente rotuladas e grandes quantidades de instâncias não rotuladas. Neste artigo, é proposta uma técnica de classificação semissupervisionada para análise de séries temporais obtidas a partir de imagens de satélites, visando a identificação de áreas de plantio de cana-de-açúcar. Os resultados dos experimentos realizados indicam que a técnica proposta alcança melhor qualidade na classificação de áreas de cana-de-açúcar quando comparada a duas outras técnicas, supervisionada e semissupervisionada, propostas na literatura.FAPESPCNPqCape

Enhancing the interface behavior on polycarbonate/elastomeric blends: morphological, structural, and thermal characterization

A systematic study was performed to provide better understanding of the effect of elas tomeric materials on the behavior of polycarbonate blends (PC). Thus, blends of PC with different amounts of elastomers, such as copolyether ester elastomer (COPE), acrylonitrile–butadiene–styrene (ABS), maleic anhydride-grafted ABS (ABS-g-MA), and styrene–ethylene–butylene–styrene (SEBS g-MA) were prepared in a co-rotating twin-screw extruder. The materials were characterized by an electronic microscopy (SEM), an infrared spectroscopy (FTIR), and thermal (DSC) and thermo mechanical (DMA) techniques. The incorporation of elastomeric phases was observed by changes in the FTIR band’s intensity, whereas a new shoulder of the ester band of COPE at 1728 cm−1 indicates the occurrence of a transesterification reaction. Unmodified and modified ABS (5% and 10%) did not affect the glass transition temperature (Tg) of PC, while 1% SEBS-g-MA slightly increased this value. PC/10% COPE showed that a decrease in Tg of 25 ◦C has a result of better compatibilization between both phases, which is visible via SEM. SEM analysis identified three main toughening mechanisms, depending on the type of elastomer. Unlike any other study, this work deepens the knowledge, in a comparative way, to understand the elastomeric effect at the interface and consequently, on the mechanical behavior of PC systems.This work was founded by Portugal 2020, and Fundo Social Europeu (FSE) through Programa Operacional Regional do NORTE (NORTE-08-5369–FSE-000034), developed under the pro gram “IMPULSE—Polímeros e Compósitos: Drivers da inovação tecnológica e da competitividade industrial”. The authors also acknowledge the Portuguese Foundation of Science and Technology (TSSiPRO—TECHNOLOGIES FOR SUSTAINABLE AND SMART INNOVATIVE PRODUCTS— NORTE-01-0145-FEDER-000015) and UID/CTM/50025/2013 for the financial support

Active flexible films for food packaging: a review

Active food packaging is a dynamic area where the scientific community and industry have been trying to find new strategies to produce innovative packaging that is economically viable and compatible with conventional production processes. The materials used to develop active packaging can be organized into scavenging and emitting materials, and based on organic and inorganic materials. However, the incorporation of these materials in polymer-based flexible packaging is not always straightforward. The challenges to be faced are mainly related to active agents’ sensitivity to high temperatures or difficulties in dispersing them in the high viscosity polymer matrix. This review provides an overview of methodologies and processes used in the production of active packaging, particularly for the production of active flexible films at the industrial level. The direct incorporation of active agents in polymer films is presented, focusing on the processing conditions and their effect on the active agent, and final application of the packaging material. Moreover, the incorporation of active agents by coating technologies and supercritical impregnation are presented. Finally, the use of carriers to help the incorporation of active agents and several methodologies is discussed. This review aims to guide academic and industrial researchers in the development of active flexible packaging, namely in the selection of the materials, methodologies, and process conditions.Financed by European Regional Development Fund (ERDF), through the Incentive System to Research and Technological development, within the Portugal2020 Competitiveness and Internationalization Operational Program. IPC researchers acknowledge also funding by National Funds through FCT-Portuguese Foundation for Science and Technology, References UIDB/05256/2020 and UIDP/05256/2020

Sibyl:A Practical Internet Route Oracle

Network operators measure Internet routes to troubleshoot problems, and researchers measure routes to characterize the Internet. However, they still rely on decades-old tools like traceroute, BGP route collectors, and Looking Glasses, all of which permit only a single query about Internet routes—what is the path from here to there? This limited interface complicates answering queries about routes such as "find routes traversing the Level3/AT&T peering in Atlanta," to understand the scope of a reported problem there. This paper presents Sibyl, a system that takes rich queries that researchers and operators express as regular expressions, then issues and returns traceroutes that match even if it has never measured a matching path in the past. Sibyl achieves this goal in three steps. First, to maximize its coverage of Internet routing, Sibyl integrates together diverse sets of traceroute vantage points that provide complementary views, measuring from thousands of networks in total. Second, because users may not know which measurements will traverse paths of interest, and because vantage point resource constraints keep Sibyl from tracing to all destinations from all sources, Sibyl uses historical measurements to predict which new ones are likely to match a query. Finally, based on these predictions, Sibyl optimizes across concurrent queries to decide which measurements to issue given resource constraints. We show that Sibyl provides researchers and operators with the routing information they need—in fact, it matches 76% of the queries that it could match if an oracle told it which measurements to issue

Inherited biotic protection in a Neotropical pioneer plant

Chelonanthus alatus is a bat-pollinated, pioneer Gentianaceae that clusters in patches where still-standing, dried-out stems are interspersed among live individuals. Flowers bear circum-floral nectaries (CFNs) that are attractive to ants, and seed dispersal is both barochorous and anemochorous. Although, in this study, live individuals never sheltered ant colonies, dried-out hollow stems - that can remain standing for 2 years - did. Workers from species nesting in dried-out stems as well as from ground-nesting species exploited the CFNs of live C. alatus individuals in the same patches during the daytime, but were absent at night (when bat pollination occurs) on 60.5% of the plants. By visiting the CFNs, the ants indirectly protect the flowers - but not the plant foliage - from herbivorous insects. We show that this protection is provided mostly by species nesting in dried-out stems, predominantly Pseudomyrmex gracilis. That dried-out stems remain standing for years and are regularly replaced results in an opportunistic, but stable association where colonies are sheltered by one generation of dead C. alatus while the live individuals nearby, belonging to the next generation, provide them with nectar; in turn, the ants protect their flowers from herbivores. We suggest that the investment in wood by C. alatus individuals permitting stillstanding, dried-out stems to shelter ant colonies constitutes an extended phenotype because foraging workers protect the flowers of live individuals in the same patch. Also, through this process these dried-out stems indirectly favor the reproduction (and so the fitness) of the next generation including both their own offspring and that of their siblings, alladding up to a potential case of inclusive fitness in plants

Land use temporal analysis through clustering techniques on satellite image time series

Satellite images time series have been used to study land surface, such as identification of forest, water, urban areas, as well as for meteorological applications. However, for knowledge discovery in large remote sensing databases can be use clustering techniques in multivariate time series. The clustering technique on three-dimensional time series of NDVI, albedo and surface temperature from AVHRR/NOAA satellite images was used, in this study, to map the variability of land use. This approach was suitable to accomplish the temporal analysis of land use. Additionally, this technique can be used to identify and analyze dynamics of land use and cover being useful to support researches in agriculture, even considering low spatial resolution satellite images. The possibility of extracting time series from satellite images, analyzing them through data mining techniques, such as clustering, and visualizing results in geospatial way is an important advance and support to agricultural monitoring tasks

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV