Magnifying Colonoscopy Findings for Differential Diagnosis of Sessile Serrated Adenoma/Polyps and Hyperplastic Polyps

Sessile serrated adenoma/polyps (SSA/Ps) are thought to be precursors of colorectal cancers. However, current endoscopic techniques for differentiating SSA/Ps from conventional hyperplastic polyps (HPs) have low diagnostic accuracy. The aim of the present study was to assess the ability of mucosal crypt patterns to distinguish SSA/Ps from HPs. We examined 140 lesions from 93 patients that had been diagnosed histologically as SSA/Ps or HPs at the Showa University Hospital between June 2010 and May 2012. Three experienced colonoscopists reviewed the endoscopic findings of magnifying colonoscopy. Type II open-shape (Type II-O) pit patterns and varicose microvascular vessels (VMVs) were identified according to previously proposed definitions. Although 140 lesions were initially identified for the study, 27 lesions were excluded from analysis because of insufficient endoscopic findings. Thus, endoscopic findings from a total of 113 lesions (68 SSA/Ps and 45 HPs) were evaluated. Of 113 serrated polyps, 51 lesions (44 SSA/Ps and 7 HPs; P<0.01) had Type II-O pit patterns. The inter- and intra-observer agreement for these patterns among three colonoscopists was κ=0.61 (range 0.57–0.65) and κ=0.68 (range 0.52–0.94), respectively. The positive predictive value (PPV), negative predictive value (NPV), sensitivity, and specificity of Type II-O pit patterns for differentiating between SSA/P and HP were 86%, 61%, 65%, and 84%, respectively. In contrast, the PPV, NPV, sensitivity, and specificity of VMVs were 68%, 43%, 37%, and 73%, respectively. The results indicate that Type II-O mucosal crypt patterns may be useful for the differential diagnosis of SSAPs and HPs

Measurement of the W±Z boson pair-production cross section in pp collisions at √s=13TeV with the ATLAS detector

published_or_final_versio

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

Anatomy of the sign-problem in heavy-dense QCD

QCD at finite densities of heavy quarks is investigated using the density-of-states method. The phase factor expectation value of the quark determinant is calculated to unprecedented precision as a function of the chemical potential. Results are validated using those from a reweighting approach where the latter can produce a significant signalto-noise ratio. We confirm the particle–hole symmetry at low temperatures, find a strong sign problem at intermediate values of the chemical potential, and an inverse Silver Blaze feature for chemical potentials close to the onset value: here, the phase-quenched theory underestimates the density of the full theory

Search for TeV-scale gravity signatures in high-mass final states with leptons and jets with the ATLAS detector at sqrt [ s ] = 13TeV

A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb−1 of proton–proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at √s = 13 TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions

Charged-particle distributions at low transverse momentum in √s=13 13 TeV pp interactions measured with the ATLAS detector at the LHC

Measurements of distributions of charged particles produced in proton–proton collisions with a centre-of-mass energy of 13 TeV are presented. The data were recorded by the ATLAS detector at the LHC and correspond to an integrated luminosity of 151 μb −1 μb−1 . The particles are required to have a transverse momentum greater than 100 MeV and an absolute pseudorapidity less than 2.5. The charged-particle multiplicity, its dependence on transverse momentum and pseudorapidity and the dependence of the mean transverse momentum on multiplicity are measured in events containing at least two charged particles satisfying the above kinematic criteria. The results are corrected for detector effects and compared to the predictions from several Monte Carlo event generators

Measurement of the inelastic proton-proton cross section at √s=13 TeV with the ATLAS detector at the LHC

This Letter presents a measurement of the inelastic proton-proton cross section using 60  μb −1 of pp collisions at a center-of-mass energy √s of 13 TeV with the ATLAS detector at the LHC. Inelastic interactions are selected using rings of plastic scintillators in the forward region (2.0710 −6 , where M X is the larger invariant mass of the two hadronic systems separated by the largest rapidity gap in the event. In this ξ range the scintillators are highly efficient. For diffractive events this corresponds to cases where at least one proton dissociates to a system with M X >13  GeV . The measured cross section is compared with a range of theoretical predictions. When extrapolated to the full phase space, a cross section of 78.1±2.9  mb is measured, consistent with the inelastic cross section increasing with center-of-mass energy

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Measurement of the bb̄ dijet cross section in pp collisions at √s = 7 TeV with the ATLAS detector

The dijet production cross section for jets containing a b-hadron (b-jets) has been measured in proton–proton collisions with a centre-of-mass energy of √s = 7 TeV, using the ATLAS detector at the LHC. The data used correspond to an integrated luminosity of 4.2fb −¹. The cross section is measured for events with two identified b-jets with a transverse momentum pT>20 GeV and a minimum separation in the η–ϕ plane of ΔR=0.4. At least one of the jets in the event is required to have pT>270 GeV. The cross section is measured differentially as a function of dijet invariant mass, dijet transverse momentum, boost of the dijet system, and the rapidity difference, azimuthal angle and angular distance between the b-jets. The results are compared to different predictions of leading order and next-to-leading order perturbative quantum chromodynamics matrix elements supplemented with models for parton-showers and hadronization

Search for gluinos in events with an isolated lepton, jets and missing transverse momentum at √s=13 TeV with the ATLAS detector

The results of a search for gluinos in final states with an isolated electron or muon, multiple jets and large missing transverse momentum using proton–proton collision data at a centre-of-mass energy of √s=13 TeV are presented. The dataset used was recorded in 2015 by the ATLAS experiment at the Large Hadron Collider and corresponds to an integrated luminosity of 3.2 fb−1. Six signal selections are defined that best exploit the signal characteristics. The data agree with the Standard Model background expectation in all six signal selections, and the largest deviation is a 2.1 standard deviation excess. The results are interpreted in a simplified model where pair-produced gluinos decay via the lightest chargino to the lightest neutralino. In this model, gluinos are excluded up to masses of approximately 1.6 TeV depending on the mass spectrum of the simplified model, thus surpassing the limits of previous searches