The higher risk for sperm DNA damage in infertile men

Objectives: Supplementary assays are needed for determination of relationships between sperm biomarkers and fertility potential. Therefore, our research was designed to determine the extent of sperm DNA fragmentation (SDF) and establish a discriminating threshold of SDF for fertility potential. Material and methods: Semen characteristics were evaluated according to World Health Organization recommendations, and SDF was assessed by sperm chromatin dispersion test on ejaculated spermatozoa from infertile and healthy normozoospermic men. Results: A higher proportion of SDF was noted in infertile men (median 23.00%) than normozoospermic (median 14.00%). Significantly less subjects (17.03%) with low SDF level (≤ 15%) and more (35.17%) with high SDF level ( > 30%) were found for the infertile group vs the normooospermic (57.90% and 5.26%, respectively). Infertile group had significantly lower odds ratio (OR) for having a low SDF level (OR: 0.1493) and higher OR for having a high SDF level (OR: 9.7627). Receiver operating characteristic analysis [area under curve (AUC) = 0.785] revealed that 20% SDF is predictive value for discriminating between infertile and normozoospermic subjects. SDF was negatively correlated with the sperm number, morphology, progressive motility and vitality but positively with the teratozoospermia index. Conclusions: Our study demonstrates: (1) a significant difference in the extent of SDF and in the risk for having damaged sperm DNA between infertile and normozoospermic men, (2) > 20% SDF has negative predictive value for fertility potential, (3) coexistence of abnormal standard sperm parameters with sperm chromatin damages. Therefore, SDF should be considered as a highly valuable indicator of male fertility potential

The impact of sedentary work on sperm nuclear DNA integrity

Introduction. Contemporary professional jobs that often enforce a sedentary lifestyle and are frequently associated with testicular overheat, deserve special attention with respect to male fertility potential. Interestingly, the harmful effect of testicular heat stress on sperm characteristics including nuclear DNA integrity was well characterized; however, the influence of sedentary work on sperm chromatin has not yet been documented. Therefore, our research was designed to examine the potential effects of sedentary work not only on conventional semen features but also on sperm nuclear DNA status.Materials and methods. The study was carried out on ejaculated sperm cells obtained from men who spent ≥ 50% of their time at work (≥ 17.5 h per week) in a sedentary position (n = 152) and from men who spent < 50% of their time at work in a sedentary position (n = 102). Standard semen characteristics were assessed according to the WHO 2010 recommendations, while sperm nuclear DNA fragmentation (SDF) was evaluated using the Halosperm test.Results. There were no significant differences in the standard semen parameters between the study groups. The groups differed only in SDF parameter. The men who spent at least 50% of their work time in a sedentary position had a higher proportion of SDF than the men who spent < 50% of their time at work in a sedentary position (median value 21.00% vs. 16.50%, respectively). The incidence of low SDF levels (related to 0–15% sperm cells with abnormal DNA dispersion) was significantly lower (27.63% vs. 45.10%), the percentage of men with high SDF levels (related to > 30%) was significantly higher (30.92% vs. 16.67%) in group of men who spent at least 50% of their work time in a sedentary positon. Furthermore, these men were more than twice as likely to have not a low SDF level (OR: 0.4648) and had more than twice the risk of having a high SDF level (OR: 2.2381) than the men in less sedentary occupations.Conclusions. Despite lack of association between sedentary work and conventional semen characteristics our study revealed detrimental effect of seated work on sperm nuclear DNA integrity. A sedentary job doubled the risk of high levels of sperm DNA damage. The pathomechanism could be related to testicular heat stress resulting in sperm chromatin remodelling failure during spermiogenesis. Therefore, it seems reasonable to simultaneously carry out routine seminological analyses and tests assessing sperm chromatin status while diagnosing male infertility

Evaluation of selected semen parameters and biomarkers of male infertility – preliminary study [version 1; peer review: 1 approved, 2 approved with reservations]

Background: Because the etiopathogenesis of male infertility is multifactorial our study was designed to clarify the relationship between standard semen parameters, testicular volume, levels of reproductive hormones and the fragmentation of sperm nuclear DNA (SDF). Methods: Patients (n = 130) were clustered as subjects: 1) with an abnormal volume (utrasonography) of at least one testis (30%), moderate (>15–30%) or low (≤15%) (sperm chromatin dispersion test). Results: In subjects with a decreased testicular volume and in subjects with abnormal levels of reproductive hormones, decreased basic semen parameters were found. Participants with abnormal testicular volume had a higher percentage of SDF and a higher level of FSH (Mann–Whitney U test). In turn, men with a high level of SDF had lower testicular volume and conventional sperm parameters than men with a low level of SDF (Kruskal–Wallis test). Conclusions: We showed that spermatogenesis disorders coexisted with decreased testicular volume and increased FSH levels. The disorders of spermatogenesis were manifested by reduced basic sperm characteristics and a high level of sperm nuclear DNA damage

Global, regional, and national burden of neurological disorders, 1990–2016 : a systematic analysis for the Global Burden of Disease Study 2016

Background: Neurological disorders are increasingly recognised as major causes of death and disability worldwide. The aim of this analysis from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2016 is to provide the most comprehensive and up-to-date estimates of the global, regional, and national burden from neurological disorders. Methods: We estimated prevalence, incidence, deaths, and disability-adjusted life-years (DALYs; the sum of years of life lost [YLLs] and years lived with disability [YLDs]) by age and sex for 15 neurological disorder categories (tetanus, meningitis, encephalitis, stroke, brain and other CNS cancers, traumatic brain injury, spinal cord injury, Alzheimer's disease and other dementias, Parkinson's disease, multiple sclerosis, motor neuron diseases, idiopathic epilepsy, migraine, tension-type headache, and a residual category for other less common neurological disorders) in 195 countries from 1990 to 2016. DisMod-MR 2.1, a Bayesian meta-regression tool, was the main method of estimation of prevalence and incidence, and the Cause of Death Ensemble model (CODEm) was used for mortality estimation. We quantified the contribution of 84 risks and combinations of risk to the disease estimates for the 15 neurological disorder categories using the GBD comparative risk assessment approach. Findings: Globally, in 2016, neurological disorders were the leading cause of DALYs (276 million [95% UI 247–308]) and second leading cause of deaths (9·0 million [8·8–9·4]). The absolute number of deaths and DALYs from all neurological disorders combined increased (deaths by 39% [34–44] and DALYs by 15% [9–21]) whereas their age-standardised rates decreased (deaths by 28% [26–30] and DALYs by 27% [24–31]) between 1990 and 2016. The only neurological disorders that had a decrease in rates and absolute numbers of deaths and DALYs were tetanus, meningitis, and encephalitis. The four largest contributors of neurological DALYs were stroke (42·2% [38·6–46·1]), migraine (16·3% [11·7–20·8]), Alzheimer's and other dementias (10·4% [9·0–12·1]), and meningitis (7·9% [6·6–10·4]). For the combined neurological disorders, age-standardised DALY rates were significantly higher in males than in females (male-to-female ratio 1·12 [1·05–1·20]), but migraine, multiple sclerosis, and tension-type headache were more common and caused more burden in females, with male-to-female ratios of less than 0·7. The 84 risks quantified in GBD explain less than 10% of neurological disorder DALY burdens, except stroke, for which 88·8% (86·5–90·9) of DALYs are attributable to risk factors, and to a lesser extent Alzheimer's disease and other dementias (22·3% [11·8–35·1] of DALYs are risk attributable) and idiopathic epilepsy (14·1% [10·8–17·5] of DALYs are risk attributable). Interpretation: Globally, the burden of neurological disorders, as measured by the absolute number of DALYs, continues to increase. As populations are growing and ageing, and the prevalence of major disabling neurological disorders steeply increases with age, governments will face increasing demand for treatment, rehabilitation, and support services for neurological disorders. The scarcity of established modifiable risks for most of the neurological burden demonstrates that new knowledge is required to develop effective prevention and treatment strategies. Funding: Bill & Melinda Gates Foundation

Estimating global injuries morbidity and mortality : methods and data used in the Global Burden of Disease 2017 study

Background: While there is a long history of measuring death and disability from injuries, modern research methods must account for the wide spectrum of disability that can occur in an injury, and must provide estimates with sufficient demographic, geographical and temporal detail to be useful for policy makers. The Global Burden of Disease (GBD) 2017 study used methods to provide highly detailed estimates of global injury burden that meet these criteria. Methods: In this study, we report and discuss the methods used in GBD 2017 for injury morbidity and mortality burden estimation. In summary, these methods included estimating cause-specific mortality for every cause of injury, and then estimating incidence for every cause of injury. Non-fatal disability for each cause is then calculated based on the probabilities of suffering from different types of bodily injury experienced. Results: GBD 2017 produced morbidity and mortality estimates for 38 causes of injury. Estimates were produced in terms of incidence, prevalence, years lived with disability, cause-specific mortality, years of life lost and disability-adjusted life-years for a 28-year period for 22 age groups, 195 countries and both sexes. Conclusions: GBD 2017 demonstrated a complex and sophisticated series of analytical steps using the largest known database of morbidity and mortality data on injuries. GBD 2017 results should be used to help inform injury prevention policy making and resource allocation. We also identify important avenues for improving injury burden estimation in the future

Estimating global injuries morbidity and mortality: methods and data used in the Global Burden of Disease 2017 study

BACKGROUND: While there is a long history of measuring death and disability from injuries, modern research methods must account for the wide spectrum of disability that can occur in an injury, and must provide estimates with sufficient demographic, geographical and temporal detail to be useful for policy makers. The Global Burden of Disease (GBD) 2017 study used methods to provide highly detailed estimates of global injury burden that meet these criteria. METHODS: In this study, we report and discuss the methods used in GBD 2017 for injury morbidity and mortality burden estimation. In summary, these methods included estimating cause-specific mortality for every cause of injury, and then estimating incidence for every cause of injury. Non-fatal disability for each cause is then calculated based on the probabilities of suffering from different types of bodily injury experienced. RESULTS: GBD 2017 produced morbidity and mortality estimates for 38 causes of injury. Estimates were produced in terms of incidence, prevalence, years lived with disability, cause-specific mortality, years of life lost and disability-adjusted life-years for a 28-year period for 22 age groups, 195 countries and both sexes. CONCLUSIONS: GBD 2017 demonstrated a complex and sophisticated series of analytical steps using the largest known database of morbidity and mortality data on injuries. GBD 2017 results should be used to help inform injury prevention policy making and resource allocation. We also identify important avenues for improving injury burden estimation in the future

Global injury morbidity and mortality from 1990 to 2017 : results from the Global Burden of Disease Study 2017

Correction:Background Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries. Methods We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs). Findings In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505). Interpretation Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.Peer reviewe

Estimating global injuries morbidity and mortality : methods and data used in the Global Burden of Disease 2017 study

Background While there is a long history of measuring death and disability from injuries, modern research methods must account for the wide spectrum of disability that can occur in an injury, and must provide estimates with sufficient demographic, geographical and temporal detail to be useful for policy makers. The Global Burden of Disease (GBD) 2017 study used methods to provide highly detailed estimates of global injury burden that meet these criteria. Methods In this study, we report and discuss the methods used in GBD 2017 for injury morbidity and mortality burden estimation. In summary, these methods included estimating cause-specific mortality for every cause of injury, and then estimating incidence for every cause of injury. Non-fatal disability for each cause is then calculated based on the probabilities of suffering from different types of bodily injury experienced. Results GBD 2017 produced morbidity and mortality estimates for 38 causes of injury. Estimates were produced in terms of incidence, prevalence, years lived with disability, cause-specific mortality, years of life lost and disability-adjusted life-years for a 28-year period for 22 age groups, 195 countries and both sexes. Conclusions GBD 2017 demonstrated a complex and sophisticated series of analytical steps using the largest known database of morbidity and mortality data on injuries. GBD 2017 results should be used to help inform injury prevention policy making and resource allocation. We also identify important avenues for improving injury burden estimation in the future.Peer reviewe

Common, low-frequency, rare, and ultra-rare coding variants contribute to COVID-19 severity

The combined impact of common and rare exonic variants in COVID-19 host genetics is currently insufficiently understood. Here, common and rare variants from whole-exome sequencing data of about 4000 SARS-CoV-2-positive individuals were used to define an interpretable machine-learning model for predicting COVID-19 severity. First, variants were converted into separate sets of Boolean features, depending on the absence or the presence of variants in each gene. An ensemble of LASSO logistic regression models was used to identify the most informative Boolean features with respect to the genetic bases of severity. The Boolean features selected by these logistic models were combined into an Integrated PolyGenic Score that offers a synthetic and interpretable index for describing the contribution of host genetics in COVID-19 severity, as demonstrated through testing in several independent cohorts. Selected features belong to ultra-rare, rare, low-frequency, and common variants, including those in linkage disequilibrium with known GWAS loci. Noteworthily, around one quarter of the selected genes are sex-specific. Pathway analysis of the selected genes associated with COVID-19 severity reflected the multi-organ nature of the disease. The proposed model might provide useful information for developing diagnostics and therapeutics, while also being able to guide bedside disease management. © 2021, The Author(s)

Shifting the limits in wheat research and breeding using a fully annotated reference genome

Introduction: Wheat (Triticum aestivum L.) is the most widely cultivated crop on Earth, contributing about a fifth of the total calories consumed by humans. Consequently, wheat yields and production affect the global economy, and failed harvests can lead to social unrest. Breeders continuously strive to develop improved varieties by fine-tuning genetically complex yield and end-use quality parameters while maintaining stable yields and adapting the crop to regionally specific biotic and abiotic stresses. Rationale: Breeding efforts are limited by insufficient knowledge and understanding of wheat biology and the molecular basis of central agronomic traits. To meet the demands of human population growth, there is an urgent need for wheat research and breeding to accelerate genetic gain as well as to increase and protect wheat yield and quality traits. In other plant and animal species, access to a fully annotated and ordered genome sequence, including regulatory sequences and genome-diversity information, has promoted the development of systematic and more time-efficient approaches for the selection and understanding of important traits. Wheat has lagged behind, primarily owing to the challenges of assembling a genome that is more than five times as large as the human genome, polyploid, and complex, containing more than 85% repetitive DNA. To provide a foundation for improvement through molecular breeding, in 2005, the International Wheat Genome Sequencing Consortium set out to deliver a high-quality annotated reference genome sequence of bread wheat. Results: An annotated reference sequence representing the hexaploid bread wheat genome in the form of 21 chromosome-like sequence assemblies has now been delivered, giving access to 107,891 high-confidence genes, including their genomic context of regulatory sequences. This assembly enabled the discovery of tissue- and developmental stage–related gene coexpression networks using a transcriptome atlas representing all stages of wheat development. The dynamics of change in complex gene families involved in environmental adaptation and end-use quality were revealed at subgenome resolution and contextualized to known agronomic single-gene or quantitative trait loci. Aspects of the future value of the annotated assembly for molecular breeding and research were exemplarily illustrated by resolving the genetic basis of a quantitative trait locus conferring resistance to abiotic stress and insect damage as well as by serving as the basis for genome editing of the flowering-time trait. Conclusion: This annotated reference sequence of wheat is a resource that can now drive disruptive innovation in wheat improvement, as this community resource establishes the foundation for accelerating wheat research and application through improved understanding of wheat biology and genomics-assisted breeding. Importantly, the bioinformatics capacity developed for model-organism genomes will facilitate a better understanding of the wheat genome as a result of the high-quality chromosome-based genome assembly. By necessity, breeders work with the genome at the whole chromosome level, as each new cross involves the modification of genome-wide gene networks that control the expression of complex traits such as yield. With the annotated and ordered reference genome sequence in place, researchers and breeders can now easily access sequence-level information to precisely define the necessary changes in the genomes for breeding programs. This will be realized through the implementation of new DNA marker platforms and targeted breeding technologies, including genome editing