Progressive Collapse Performance of Steel Beam-to-Column Connections: Critical Review of Experimental Results

Background: The steel beam-to-column connections are vulnerable structural elements when a building loses one or more of its vertical load-carrying components due to abnormal or accidental loading conditions. After a column is destroyed by abnormal loads, the tensile axial force of the beam gradually increased, while the bending moment decreased, and the load-resistance mechanism shifts from a flexural mechanism to a catenary mechanism, with the axial force becoming the prevailing factor. Aims: This paper investigates the progressive collapse performance of steel beam-to-column connections. While undergoing large deformation, the beamto- column connections are subjected to moment, shear, and tension in conjunction with high ductility demand. Their behavior under monotonic loading depends on the moment-axial tension interaction and greatly affects the progressive collapse resistance of the structure. This paper presents a critical review of experimental tests of different types of steel beam-column joints (flexible, rigid, and semi-rigid) under a central-columnremoval scenario. Methods: The experimental results, including load-deformation relationships, failure modes, and catenary effects, are described in detail. The findings are used to evaluate the rotation capacity of different types of steel beam-to-column connections. The results are compared to the acceptance criteria specified by the main progressive collapse guidelines for several beam-to-column connection categories. Results: In simple (flexible) joints, the stiffness and strength at higher drift angles essentially depend on the tensile capacity of the connection that prevents, in some cases, the full development of the catenary mechanism. The connection depth alone does not seem to be an effective parameter to predict the rotational capacity of beam-to-column connections, since different connections with similar values of the connection depth result in very different values of the maximum rotation capacity. In fully rigid and semi-rigid connections, after the column removal, the flexural resistance controls the behavior at the preliminary phase, and the tensile force is almost zero. With increased downward displacement, the axial tensile force also increases, developing a catenary mechanism. Although the stiffness of rigid and semi-rigid connections is higher than flexible connections, both categories result in similar rotation capacity. Conclusion: In all the simple connections herein considered, the plastic rotation capacity obtained by tests was found much higher than the code recommended values that are probably too conservative. On the contrary, for one rigid and two semi-rigid connections, the values of the plastic rotation capacity obtained by tests are lower than the corresponding recommended values. Thus, the suggested acceptance criteria proved to be out of the conservative side

Base Isolation for Seismic Retrofitting of a Multiple Building Structure: Evaluation of Equivalent Linearization Method

Although the most commonly used isolation systems exhibit nonlinear inelastic behaviour, the equivalent linear elastic analysis is commonly used in the design and assessment of seismic-isolated structures. The paper investigates if the linear elastic model is suitable for the analysis of a seismically isolated multiple building structure. To this aim, its computed responses were compared with those calculated by nonlinear dynamic analysis. A common base isolation plane connects the isolation bearings supporting the adjacent structures. In this situation, the conventional equivalent linear elastic analysis may have some problems of accuracy because this method is calibrated on single base-isolated structures. Moreover, the torsional characteristics of the combined system are significantly different from those of separate isolated buildings. A number of numerical simulations and parametric studies under earthquake excitations were performed. The accuracy of the dynamic response obtained by the equivalent linear elastic model was calculated by the magnitude of the error with respect to the corresponding response considering the nonlinear behaviour of the isolation system. The maximum displacements at the isolation level, the maximum interstorey drifts, and the peak absolute acceleration were selected as the most important response measures. The influence of mass eccentricity, torsion, and high-modes effects was finally investigated

Seismic and Robustness Design of Steel Frame Buildings

In this paper, a design procedure that combines both progressive collapse design under column removal scenario and capacity design to produce a hierarchy of design strengths is presented. The procedure develops in the context of the European Standards, using the classification of European steel sections and considering the seismic design features. Three-dimensional models of typical multi-storey steel frame buildings are employed in numerical analysis. The design for progressive collapse is carried out with three types of analysis, namely linear static, nonlinear static and nonlinear dynamic. Since the behaviour following sudden column loss is likely to be inelastic and possibly implicate catenary effects, both geometric and material nonlinearities are considered. The influence of the fundamental parameters involved in seismic and robustness design is finally investigated

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Search for heavy resonances decaying to two Higgs bosons in final states containing four b quarks

A search is presented for narrow heavy resonances X decaying into pairs of Higgs bosons (H) in proton-proton collisions collected by the CMS experiment at the LHC at root s = 8 TeV. The data correspond to an integrated luminosity of 19.7 fb(-1). The search considers HH resonances with masses between 1 and 3 TeV, having final states of two b quark pairs. Each Higgs boson is produced with large momentum, and the hadronization products of the pair of b quarks can usually be reconstructed as single large jets. The background from multijet and t (t) over bar events is significantly reduced by applying requirements related to the flavor of the jet, its mass, and its substructure. The signal would be identified as a peak on top of the dijet invariant mass spectrum of the remaining background events. No evidence is observed for such a signal. Upper limits obtained at 95 confidence level for the product of the production cross section and branching fraction sigma(gg -> X) B(X -> HH -> b (b) over barb (b) over bar) range from 10 to 1.5 fb for the mass of X from 1.15 to 2.0 TeV, significantly extending previous searches. For a warped extra dimension theory with amass scale Lambda(R) = 1 TeV, the data exclude radion scalar masses between 1.15 and 1.55 TeV

Search for supersymmetry in events with one lepton and multiple jets in proton-proton collisions at root s=13 TeV

Peer reviewe

Measurement of the top quark mass using charged particles in pp collisions at root s=8 TeV

Peer reviewe

Dynamic increase factor for pushdown analysis of seismically designed steel moment-resisting frames

The independent threat scenario of sudden column loss under localised damage is usually considered in progressive collapse assessment. The effect of the sudden removal of a column is like the sudden application of the gravity load on the structure when significant deformations occur. This conventional approach is based on the simplifying but realistic hypothesis that the peak dynamic response can be assessed with reasonable accuracy using the nonlinear static response. In this approach, amplified gravity loads are applied to the bays that are affected by the removed column to compensate for the dynamic effects corresponding to the real load redistribution. The paper investigates the dynamic increase factor to be considered in the nonlinear pushdown analysis of seismically designed steel moment-resisting frames. The influence of the fundamental parameters involved in progressive collapse analysis was highlighted. The effect of various design variables, such as the number of stories, the number of bays, the location of the removed column and the level of seismic design load was investigated. The dynamic increase factor was estimated in a way to generate the best match of the peak dynamic responses through the nonlinear static analysis. Finally, the values obtained were expressed as a function of the vertical displacement at the location of the removed column and then compared with the GSA formulation based on the ductility factor

A modal pushdown procedure for progressive collapse analysis of steel frame structures

A modal pushdown analysis procedure is developed for progressive collapse assessment of multi-storey steel frame buildings under sudden removal of a column due to catastrophic events. Since the first vertical bending mode generally dominates the behaviour of the structure after column removal, the global response is assumed entirely in this mode shape while no contribution is considered from other modes. Thus, the target displacement of the column-removed point is estimated from the nonlinear response–history analysis of a modal inelastic single degree-of-freedom (SDOF) system under a rectangular pulse force that simulates the abrupt column removal. The properties of this SDOF system are calculated from the nonlinear static (pushdown) analysis of the damaged structure using the modal properties of the first bending mode shape. A two-step pushdown analysis procedure is developed to estimate the inelastic response of the structure and the dynamic amplification factor (DIF) to use when conducting the nonlinear static analysis. The accuracy of the proposed procedure is estimated and compared to other formulations in the literature. For this reason, a series of three-dimensional steel frame buildings with varying number of spans and storeys have been considered in the analysis. Different loading levels and column removal scenarios are investigated. The study results show that the modal pushdown procedure gives accurate solution, accounting for both real plastic deformation demand and catenary stiffening action in steel beams

Multi-mode pushover procedure for deformation demand estimates of steel moment-resisting frames

The main objective of the paper is the development and evaluation of a multi-mode pushover procedure for the approximate analysis of the seismic response of steel moment-resisting frames. A generalized force vector derived from modal combination simulates the instantaneous force distribution acting on the structure when the interstorey drift reaches its maximum value during dynamic response to a seismic excitation. Considering the interstorey drift for each floor, a set of generalized force vectors (each associated to maximum drift at one story) is applied separately to the structure until the corresponding target interstorey drift is attained. The maximum value of each response parameter is obtained from the envelope of results. This multi-run and multi-mode pushover procedure allows a simple implementation, reducing the computational effort compared with adaptive nonlinear static procedures and with nonlinear response history analysis. Furthermore, it does not suffer from the statistical combination of inelastic modal responses calculated separately. Both effectiveness and accuracy are verified through a comparative study involving regular steel moment resisting frames subjected to various acceleration records. The results are finally compared with those obtained from other nonlinear static procedures and with the “exact” values from nonlinear response history analysis. It is demonstrated that the proposed procedure is able to accurately predict the seismic demands of steel moment-resisting frames. In low- and middle-rise frames, the error of interstorey drift ratios of the proposed procedure is in the range 5.8-20.8% when the intensity level of the input ground motion varies in the range 0.2-0.8 g. In high-rise frames the error of interstorey drift ratios is in the range 6.38-20.9%