544 research outputs found

    Influence Of The Degree Of Hydrolysis And Type Of Enzyme On Antioxidant Activity Of Okara Protein Hydrolysates

    Get PDF
    The objective of this work was to evaluate the antioxidant activity of protein hydrolysates obtained by the enzymatic hydrolysis of okara using an endopeptidase (Alcalase) and exopeptidase (Flavourzyme). The reaction was monitored by the pH-stat procedure in which five aliquots were collected during the hydrolysis by each enzyme, corresponding to different degrees of hydrolysis (DH). The antioxidant activities of the aliquots were evaluated by the ABTS, DPPH and FRAP methods. For the hydrolysates obtained using Alcalase, the antioxidant activities increased from: 68.6 to 99.5% (ABTS), 14.5 to 17.7% (DPPH) and 222.6 to 684.9 [iM Trolox (FRAP), when the DH varied from 0 to 33.6%. With respect to Flavourzyme, the results were: 67.2 to 88.2% (ABTS), 9.5 to 18.5% (DPPH) and 168.0 to 360.3 [¾M Trolox (FRAP), when the DH increased up to 5.8%. The results showed that the protein hydrolysates had antioxidant capacities, which were influenced by the degree of hydrolysis and the type of enzyme. Š 2016 Sociedade Brasileira de Ciencia e Tecnologia de Alimentos, SBCTA. All rights reserved.36237538

    Place based transformative learning: a framework to explore consciousness in sustainability initiatives

    Get PDF
    Based on a critical literature review, the article argues that transformative learning (TL) that fosters a shift in consciousness towards a more ecological approach is an inherently place-based phenomenon. In this article we build a place-based approach to TL based on a literature review. Our theoretical framework is grounded in three key themes which emerge from the literature: (re-) connection, (self-)compassion and creativity. (Re-)connection involves all processes that evoke an experience of the interconnected nature of all life. (Self-)compassion, acting to alleviate suffering or doing the least harm, naturally follows a sense of interconnection. Creativity is the materialisation of a sense of interconnection and compassion or the means through which these can be experienced. This theoretical framework can be used empirically to research the extent to which people involved in place-based sustainability initiatives develop an ecological consciousness. Empirical research can then be used to further develop and anchor this framework, and seek the kind of practices that can evoke experiences of connection, cultivate the human ability for compassion and give space for creative living.</p

    Trackly:A Customisable and Pictorial Self-Tracking App to Support Agency in Multiple Sclerosis Self-Care

    Get PDF
    Self-tracking is an important part of self-care. However, predefined self-tracking approaches can impede people's agency in managing their health. We investigated a customisable and pictorial self-tracking approach in multiple sclerosis self-management by implementing and conducting a field study of Trackly: a prototype app that supports people in defining and colouring pictorial trackers, such as body shapes. We found that participants utilised the elements of Trackly designed to support agentive behaviour: they defined personally meaningful tracking parameters in their own words, and particularly valued being able to flexibly colour in and make sense of their pictorial trackers. Having been able to support their individual self-care intentions with Trackly, participants reported a spectrum of interrelated experiences of agency, including a sense of ownership, identity, self-awareness, mindfulness, and control. Our findings demonstrate the importance of supporting people's individual needs and creative capacities to foster mindful and personally meaningful engagement with health and wellbeing data

    Advanced interface models for metal forming simulations

    Full text link
    Friction and heat transfer in metal forming simulations are usually restricted by software to be interface constants, a situation not reflected by the mechanics of real manufacturing processes. A better simulation approach is to use a micromechanics based method to estimate friction and heat transfer as evolutionary phenomenon. This paper presents a friction and heat transfer module for hot forging simulations. The friction model is based on a lubricant film thickness calculation using the Reynolds equation, and a calculation of the fractional contact area based on asperity flattening and roughening. Friction is then portioned between asperity and lubricant contacts. Heat transfer coefficients are calculated using a new model for heat conduction through asperity contact patches and lubricant that takes into account the restriction to heat flow at the contacts. The program is implemented as a user routine in a popular commercially available finite element code, DEFORM 2D.Schmid, SR.; Liu, J.; SellÊs Cantó, MÁ.; Pasang, T. (2013). Advanced interface models for metal forming simulations. Computational Materials Science. 79:763-771. doi:10.1016/j.commatsci.2013.07.025S7637717

    On the influence of a Coulomb-like potential induced by the Lorentz symmetry breaking effects on the Harmonic Oscillator

    Full text link
    In this work, we obtain bound states for a nonrelativistic spin-half neutral particle under the influence of a Coulomb-like potential induced by the Lorentz symmetry breaking effects. We present a new possible scenario of studying the Lorentz symmetry breaking effects on a nonrelativistic quantum system defined by a fixed space-like vector field parallel to the radial direction interacting with a uniform magnetic field along the z-axis. Furthermore, we also discuss the influence of a Coulomb-like potential induced by Lorentz symmetry violation effects on the two-dimensional harmonic oscillator.Comment: 14 pages, no figure, this work has been accepted for publication in The European Physical Journal Plu

    Proliferation, apoptosis and their regulatory protein expression in colorectal adenomas and serrated lesions

    Get PDF
    Background Adenomas and serrated lesions represent heterogeneous sets of early precursors in the colorectum with varying malignant potential. They are often distinguished by their histopathologic differences, but little is known about potential differences in regulation of epithelial proliferation and apoptosis. Methods We conducted a protein expression analysis using tissue microarrays of 625 colorectal adenomas and 142 serrated lesions to determine potential differences in regulation of epithelial proliferation and apoptosis. We quantitated proliferation with Ki-67; apoptosis with activated caspase-3 (CASP3); up- and down-regulators of proliferation with cyclin D1, p16INK2, and p21Cip1; and apoptosis regulators with BAX, BCL2, and survivin. Linear mixed effects models and circos diagrams were used to determine relationships among expression and lesion characteristics. Results Adenomas had a significantly higher CASP-3 labeling index (LI) than serrated lesions, resulting in a lower net growth ratio (Ki-67 LI/activated CASP-3 LI, p-value&lt;0.0001). Cyclin D1 LI, p16 LI and p21 LI were lower in adenomas compared to serrated lesions, while expression of both BCL2 and BAX were higher (p &lt;0.001). Among adenomas, cyclin D1 LI and p16 LI levels increased with greater villous component, and the highest BAX expression was detected in adenomas larger than 2 cm (both p&lt;0.0001). Right-sided adenomas had higher CASP3 LI than left colorectal adenomas (p = 0.008). Significant differences in cyclin D1 LI, p21 LI and survivin LI were also observed across histopathologic subtypes of serrated lesions. Conclusions Our findings demonstrate different patterns of regulatory protein expression in adenomas than serrated lesions, especially involving apoptosis

    Search for a W' boson decaying to a bottom quark and a top quark in pp collisions at sqrt(s) = 7 TeV

    Get PDF
    Results are presented from a search for a W' boson using a dataset corresponding to 5.0 inverse femtobarns of integrated luminosity collected during 2011 by the CMS experiment at the LHC in pp collisions at sqrt(s)=7 TeV. The W' boson is modeled as a heavy W boson, but different scenarios for the couplings to fermions are considered, involving both left-handed and right-handed chiral projections of the fermions, as well as an arbitrary mixture of the two. The search is performed in the decay channel W' to t b, leading to a final state signature with a single lepton (e, mu), missing transverse energy, and jets, at least one of which is tagged as a b-jet. A W' boson that couples to fermions with the same coupling constant as the W, but to the right-handed rather than left-handed chiral projections, is excluded for masses below 1.85 TeV at the 95% confidence level. For the first time using LHC data, constraints on the W' gauge coupling for a set of left- and right-handed coupling combinations have been placed. These results represent a significant improvement over previously published limits.Comment: Submitted to Physics Letters B. Replaced with version publishe

    Search for the standard model Higgs boson decaying into two photons in pp collisions at sqrt(s)=7 TeV

    Get PDF
    A search for a Higgs boson decaying into two photons is described. The analysis is performed using a dataset recorded by the CMS experiment at the LHC from pp collisions at a centre-of-mass energy of 7 TeV, which corresponds to an integrated luminosity of 4.8 inverse femtobarns. Limits are set on the cross section of the standard model Higgs boson decaying to two photons. The expected exclusion limit at 95% confidence level is between 1.4 and 2.4 times the standard model cross section in the mass range between 110 and 150 GeV. The analysis of the data excludes, at 95% confidence level, the standard model Higgs boson decaying into two photons in the mass range 128 to 132 GeV. The largest excess of events above the expected standard model background is observed for a Higgs boson mass hypothesis of 124 GeV with a local significance of 3.1 sigma. The global significance of observing an excess with a local significance greater than 3.1 sigma anywhere in the search range 110-150 GeV is estimated to be 1.8 sigma. More data are required to ascertain the origin of this excess.Comment: Submitted to Physics Letters

    Measurement of the Lambda(b) cross section and the anti-Lambda(b) to Lambda(b) ratio with Lambda(b) to J/Psi Lambda decays in pp collisions at sqrt(s) = 7 TeV

    Get PDF
    The Lambda(b) differential production cross section and the cross section ratio anti-Lambda(b)/Lambda(b) are measured as functions of transverse momentum pt(Lambda(b)) and rapidity abs(y(Lambda(b))) in pp collisions at sqrt(s) = 7 TeV using data collected by the CMS experiment at the LHC. The measurements are based on Lambda(b) decays reconstructed in the exclusive final state J/Psi Lambda, with the subsequent decays J/Psi to an opposite-sign muon pair and Lambda to proton pion, using a data sample corresponding to an integrated luminosity of 1.9 inverse femtobarns. The product of the cross section times the branching ratio for Lambda(b) to J/Psi Lambda versus pt(Lambda(b)) falls faster than that of b mesons. The measured value of the cross section times the branching ratio for pt(Lambda(b)) > 10 GeV and abs(y(Lambda(b))) < 2.0 is 1.06 +/- 0.06 +/- 0.12 nb, and the integrated cross section ratio for anti-Lambda(b)/Lambda(b) is 1.02 +/- 0.07 +/- 0.09, where the uncertainties are statistical and systematic, respectively.Comment: Submitted to Physics Letters
    • …
    corecore