Influence of the substrate type on CVD grown homoepitaxial diamond layer quality by cross sectional TEM and CL analysis

To assess diamond-based semiconducting devices, a reduction of point defect levels and an accurate control of doping are required as well as the control of layer thickness. Among the analyses required to improve such parameters, cross sectional studies should take importance in the near future. The present contribution shows how FIB (focused ion beam) preparations followed by electron microscopy related techniques as TEM or CL allowed to performanalysis versus depth in the layer, doping and point defect levels. Three samples grown along the sameweek in the same machinewith identical growth conditions but on different substrates (CVD-IIIa (110) oriented, CVD-optical grade (100) oriented and a HPHT-Ib (100) oriented) are studied. Even though A-band is observed by CL, no dislocation is observed by CTEM. Point defect type and level are shown to substantially change with respect to the substrate type as well as the boron doping levels that vary within an order of magnitude. H3 present in the epilayer grown on HPHT type of substrate is replaced by T1 and NE3 point defects for epilayers grown on the CVD type one. An increase of excitonic transitions through LO phonons is also shown to take place near the surface while only TO ones are detected deeper in the epilayer. Such results highlight the importance of choosing the correct substrate.5 page

Dislocation generation mechanisms in heavily boron-doped diamond epilayers

Doping diamond layers for electronic applications has become straightforward during the last two decades. However, dislocation generation in diamond during the microwave plasma enhanced chemical vapor deposition growth process is still not fully understood. This is a truly relevant topic to avoid for an optimal performance of any device, but, usually, it is not considered when designing diamond structures for electronic devices. The incorporation of a dopant, here boron, into a lattice as close as that of diamond, can promote the appearance of dislocations in the epilayer. The present contribution analyzes the different processes that can take place in this epilayer and gives some rules to avoid the formation of dislocations, based on the comparison of the different dislocation generation mechanisms. Indeed, competitive mechanisms, such as doping atom proximity effect and lattice strain relaxation, are here quantified for heavily boron-doped diamond epilayers. The resulting growth condition windows for defect-free heavily doped diamond are here deduced, introducing the diamond parameters and its lattice expansion in several previously published critical thickness (h(c)) and critical doping level relationships for different doping levels and growth conditions. Experimental evidence supports the previously discussed thickness-doping-growth condition relationships. Layers with and without dislocations reveal that not only the thickness but also other key factors such as growth orientation and growth parameters are important, as dislocations are shown to be generated in epilayers with a thickness below the People and Bean critical thickness

Overview of recent TJ-II stellarator results

The main results obtained in the TJ-II stellarator in the last two years are reported. The most important topics investigated have been modelling and validation of impurity transport, validation of gyrokinetic simulations, turbulence characterisation, effect of magnetic configuration on transport, fuelling with pellet injection, fast particles and liquid metal plasma facing components. As regards impurity transport research, a number of working lines exploring several recently discovered effects have been developed: the effect of tangential drifts on stellarator neoclassical transport, the impurity flux driven by electric fields tangent to magnetic surfaces and attempts of experimental validation with Doppler reflectometry of the variation of the radial electric field on the flux surface. Concerning gyrokinetic simulations, two validation activities have been performed, the comparison with measurements of zonal flow relaxation in pellet-induced fast transients and the comparison with experimental poloidal variation of fluctuations amplitude. The impact of radial electric fields on turbulence spreading in the edge and scrape-off layer has been also experimentally characterized using a 2D Langmuir probe array. Another remarkable piece of work has been the investigation of the radial propagation of small temperature perturbations using transfer entropy. Research on the physics and modelling of plasma core fuelling with pellet and tracer-encapsulated solid-pellet injection has produced also relevant results. Neutral beam injection driven Alfvénic activity and its possible control by electron cyclotron current drive has been examined as well in TJ-II. Finally, recent results on alternative plasma facing components based on liquid metals are also presentedThis work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under Grant Agreement No. 633053. It has been partially funded by the Ministerio de Ciencia, Inovación y Universidades of Spain under projects ENE2013-48109-P, ENE2015-70142-P and FIS2017-88892-P. It has also received funds from the Spanish Government via mobility grant PRX17/00425. The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by the Barcelona S.C. It has been supported as well by The Science and Technology Center in Ukraine (STCU), Project P-507F

The evolution of the ventilatory ratio is a prognostic factor in mechanically ventilated COVID-19 ARDS patients

Background: Mortality due to COVID-19 is high, especially in patients requiring mechanical ventilation. The purpose of the study is to investigate associations between mortality and variables measured during the first three days of mechanical ventilation in patients with COVID-19 intubated at ICU admission. Methods: Multicenter, observational, cohort study includes consecutive patients with COVID-19 admitted to 44 Spanish ICUs between February 25 and July 31, 2020, who required intubation at ICU admission and mechanical ventilation for more than three days. We collected demographic and clinical data prior to admission; information about clinical evolution at days 1 and 3 of mechanical ventilation; and outcomes. Results: Of the 2,095 patients with COVID-19 admitted to the ICU, 1,118 (53.3%) were intubated at day 1 and remained under mechanical ventilation at day three. From days 1 to 3, PaO2/FiO2 increased from 115.6 [80.0-171.2] to 180.0 [135.4-227.9] mmHg and the ventilatory ratio from 1.73 [1.33-2.25] to 1.96 [1.61-2.40]. In-hospital mortality was 38.7%. A higher increase between ICU admission and day 3 in the ventilatory ratio (OR 1.04 [CI 1.01-1.07], p = 0.030) and creatinine levels (OR 1.05 [CI 1.01-1.09], p = 0.005) and a lower increase in platelet counts (OR 0.96 [CI 0.93-1.00], p = 0.037) were independently associated with a higher risk of death. No association between mortality and the PaO2/FiO2 variation was observed (OR 0.99 [CI 0.95 to 1.02], p = 0.47). Conclusions: Higher ventilatory ratio and its increase at day 3 is associated with mortality in patients with COVID-19 receiving mechanical ventilation at ICU admission. No association was found in the PaO2/FiO2 variation

Detection of ammonia by residual gas analysis in AUG and JET

Nitrogen seeding, necessary for divertor heat-load mitigation in ITER, has been shown to lead to ammonia formation which would be a severe operational and safety issue in ITER. Predictions of ammonia production in ITER are based on data from present day fusion devices. Ammonia is mainly detected by residual gas analysis (RGA). Detection of ammonia is impeded by the presence of water and methane which, in a mixed H-D system, leave signatures in the same range of the mass spectra. A statistical model is used to ascribe an average isotope ratio to each gaseous species. The model is tested with simulated RGA recordings with varying concentration of ammonia to evaluate the sensitivity to fitting parameter boundaries, noise in the recordings and mis-matching cracking patterns. The analysis shows that the fitting procedure may in some occasions substitute species among each other, resulting in faulty concentrations. Nevertheless, the right choice of parameter boundaries ensures correct fitting results. Finally, the fitting procedure is applied to experimental data from nitrogen-seeeded discharges at AUG and JET

Subsídios para a gênese da imprensa musical brasileira e para a história do Hino da Independência, de Dom Pedro I Subsidies for the Brazilian musical press genesis and the history of the Independence Hymn, by Dom Pedro I

Este artigo tem por objetivos rever, mediante análise bibliográfica e de fontes primárias, a história de um de nossos símbolos musicais pátrios, o Hino da Independência, de Dom Pedro I, bem como trazer novos subsídios para o estudo da gênese da imprensa musical brasileira. Tem, igualmente, por escopo divulgar peculiaridades de uma antiga e pouco conhecida partitura desse hino, já não mais presentes em modernas edições de tal composição.<br>This article aims at reviewing, through bibliographical and primary sources analysis, the history of one of Brazil´s national anthems, the Independence Hymn, by Dom Pedro I, as well as bringing new subsidies for the study of the Brazilian musical press origins. It also intends to reveal some peculiarities of an early and lesser known piano and voice score of the Hymn, not present in today's editions of this composition

Overview of recent TJ-II stellarator results

The main results obtained in the TJ-II stellarator in the last two years are reported. The most important topics investigated have been modelling and validation of impurity transport, validation of gyrokinetic simulations, turbulence characterisation, effect of magnetic configuration on transport, fuelling with pellet injection, fast particles and liquid metal plasma facing components. As regards impurity transport research, a number of working lines exploring several recently discovered effects have been developed: the effect of tangential drifts on stellarator neoclassical transport, the impurity flux driven by electric fields tangent to magnetic surfaces and attempts of experimental validation with Doppler reflectometry of the variation of the radial electric field on the flux surface. Concerning gyrokinetic simulations, two validation activities have been performed, the comparison with measurements of zonal flow relaxation in pellet-induced fast transients and the comparison with experimental poloidal variation of fluctuations amplitude. The impact of radial electric fields on turbulence spreading in the edge and scrape-off layer has been also experimentally characterized using a 2D Langmuir probe array. Another remarkable piece of work has been the investigation of the radial propagation of small temperature perturbations using transfer entropy. Research on the physics and modelling of plasma core fuelling with pellet and tracer-encapsulated solid-pellet injection has produced also relevant results. Neutral beam injection driven Alfvénic activity and its possible control by electron cyclotron current drive has been examined as well in TJ-II. Finally, recent results on alternative plasma facing components based on liquid metals are also presented.ISSN:0029-5515ISSN:1741-432

Mídia e política no Brasil: textos e agenda de pesquisa Midia and politics in Brazil: texts and research agenda

Um especialista em estudos de comunicação e um cientista político apresentam conjuntamente um panorama da pesquisa sobre as relações entre os meios de comunicação e os processos políticos no Brasil. Uma agenda de pesquisa é proposta e um elenco de textos nessa área é apresentado.<br>A specialist in communication studies and a political scientist present together a panorama of research on the relations between communication midia and political processes in Brazil A research agenda is proposed and a list of texts in this area is presented