The European Space Agency BIOMASS mission: Measuring forest above-ground biomass from space

The primary objective of the European Space Agency's 7th Earth Explorer mission, BIOMASS, is to determine the worldwide distribution of forest above-ground biomass (AGB) in order to reduce the major uncertainties in calculations of carbon stocks and fluxes associated with the terrestrial biosphere, including carbon fluxes associated with Land Use Change, forest degradation and forest regrowth. To meet this objective it will carry, for the first time in space, a fully polarimetric P-band synthetic aperture radar (SAR). Three main products will be provided: global maps of both AGB and forest height, with a spatial resolution of 200 m, and maps of severe forest disturbance at 50 m resolution (where “global” is to be understood as subject to Space Object tracking radar restrictions). After launch in 2022, there will be a 3-month commissioning phase, followed by a 14-month phase during which there will be global coverage by SAR tomography. In the succeeding interferometric phase, global polarimetric interferometry Pol-InSAR coverage will be achieved every 7 months up to the end of the 5-year mission. Both Pol-InSAR and TomoSAR will be used to eliminate scattering from the ground (both direct and double bounce backscatter) in forests. In dense tropical forests AGB can then be estimated from the remaining volume scattering using non-linear inversion of a backscattering model. Airborne campaigns in the tropics also indicate that AGB is highly correlated with the backscatter from around 30 m above the ground, as measured by tomography. In contrast, double bounce scattering appears to carry important information about the AGB of boreal forests, so ground cancellation may not be appropriate and the best approach for such forests remains to be finalized. Several methods to exploit these new data in carbon cycle calculations have already been demonstrated. In addition, major mutual gains will be made by combining BIOMASS data with data from other missions that will measure forest biomass, structure, height and change, including the NASA Global Ecosystem Dynamics Investigation lidar deployed on the International Space Station after its launch in December 2018, and the NASA-ISRO NISAR L- and S-band SAR, due for launch in 2022. More generally, space-based measurements of biomass are a core component of a carbon cycle observation and modelling strategy developed by the Group on Earth Observations. Secondary objectives of the mission include imaging of sub-surface geological structures in arid environments, generation of a true Digital Terrain Model without biases caused by forest cover, and measurement of glacier and icesheet velocities. In addition, the operations needed for ionospheric correction of the data will allow very sensitive estimates of ionospheric Total Electron Content and its changes along the dawn-dusk orbit of the mission

In Situ Reference Datasets From the TropiSAR and AfriSAR Campaigns in Support of Upcoming Spaceborne Biomass Missions

Tropical forests are a key component of the global carbon cycle. Yet, there are still high uncertainties in forest carbon stock and flux estimates, notably because of their spatial and temporal variability across the tropics. Several upcoming spaceborne missions have been designed to address this gap. High-quality ground data are essential for accurate calibration/validation so that spaceborne biomass missions can reach their full potential in reducing uncertainties regarding forest carbon stocks and fluxes. The BIOMASS mission, a P-band SAR satellite from the European Space Agency (ESA), aims at improving carbon stock mapping and reducing uncertainty in the carbon fluxes from deforestation, forest degradation, and regrowth. In situ activities in support of the BIOMASS mission were carried out in French Guiana and Gabon during the TropiSAR and AfriSAR campaigns. During these campaigns, airborne P-band SAR, forest inventory, and lidar data were collected over six study sites. This paper describes the methods used for forest inventory and lidar data collection and analysis, and presents resulting plot estimates and aboveground biomass maps. These reference datasets along with intermediate products (e.g., canopy height models) can be accessed through ESA's Forest Observation System and the Dryad data repository and will be useful for BIOMASS but also to other spaceborne biomass missions such as GEDI, NISAR, and Tandem-L for calibration/validation purposes. During data quality control and analysis, prospects for reducing uncertainties have been identified, and this paper finishes with a series of recommendations for future tropical forest field campaigns to better serve the remote sensing community.Additional co-authors: Gaelle Jaouen, David Kenfack, Lisa Korte, Simon L Lewis, Yadvinder Malhi, Herve R Memiaghe, John R Poulsen, Maxime Rejou-Mechain, Ludovic Villard, Gregoire Vincent, and Sassan Saatch

The NASA AfriSAR campaign: Airborne SAR and lidar measurements of tropical forest structure and biomass in support of current and future space missions

International audienceIn 2015 and 2016, the AfriSAR campaign was carried out as a collaborative effort among international space and National Park agencies (ESA, NASA, ONERA, DLR, ANPN and AGEOS) in support of the upcoming ESA BIOMASS, NASA-ISRO Synthetic Aperture Radar (NISAR) and NASA Global Ecosystem Dynamics Initiative (GEDI) missions. The NASA contribution to the campaign was conducted in 2016 with the NASA LVIS (Land Vegetation and Ice Sensor) Lidar, the NASA L-band UAVSAR (Uninhabited Aerial Vehicle Synthetic Aperture Radar). A central motivation for the AfriSAR deployment was the common AGBD estimation requirement for the three future spaceborne missions, the lack of sufficient airborne and ground calibration data covering the full range of ABGD in tropical forest systems, and the intercomparison and fusion of the technologies. During the campaign, over 7000 km2 of waveform Lidar data from LVIS and 30,000 km2 of UAVSAR data were collected over 10 key sites and transects. In addition, field measurements of forest structure and biomass were collected in sixteen 1-hectare sized plots. The campaign produced gridded Lidar canopy structure products, gridded aboveground biomass and associated uncertainties, Lidar based vegetation canopy cover profile products, Polarimetric Interferometric SAR and Tomographic SAR products and field measurements. Our results showcase the types of data products and scientific results expected from the spaceborne Lidar and SAR missions; we also expect that the AfriSAR campaign data will facilitate further analysis and use of waveform lidar and multiple baseline polarimetric SAR datasets for carbon cycle, biodiversity, water resources and more applications by the greater scientific community

The NASA AfriSAR campaign: Airborne SAR and lidar measurements of tropical forest structure and biomass in support of current and future space missions

In 2015 and 2016, the AfriSAR campaign was carried out as a collaborative effort among international space and National Park agencies (ESA, NASA, ONERA, DLR, ANPN and AGEOS) in support of the upcoming ESA BIOMASS, NASA-ISRO Synthetic Aperture Radar (NISAR) and NASA Global Ecosystem Dynamics Initiative (GEDI) missions. The NASA contribution to the campaign was conducted in 2016 with the NASA LVIS (Land Vegetation and Ice Sensor) Lidar, the NASA L-band UAVSAR (Uninhabited Aerial Vehicle Synthetic Aperture Radar). A central motivation for the AfriSAR deployment was the common AGBD estimation requirement for the three future spaceborne missions, the lack of sufficient airborne and ground calibration data covering the full range of ABGD in tropical forest systems, and the intercomparison and fusion of the technologies. During the campaign, over 7000 km2 of waveform Lidar data from LVIS and 30,000 km2 of UAVSAR data were collected over 10 key sites and transects. In addition, field measurements of forest structure and biomass were collected in sixteen 1-hectare sized plots. The campaign produced gridded Lidar canopy structure products, gridded aboveground biomass and associated uncertainties, Lidar based vegetation canopy cover profile products, Polarimetric Interferometric SAR and Tomographic SAR products and field measurements. Our results showcase the types of data products and scientific results expected from the spaceborne Lidar and SAR missions; we also expect that the AfriSAR campaign data will facilitate further analysis and use of waveform lidar and multiple baseline polarimetric SAR datasets for carbon cycle, biodiversity, water resources and more applications by the greater scientific community.Additional co-authors: Bryan Blair, Christy Hansen, Yunling Lou, Ralph Dubayah, Scott Hensley, Carlos Silva, John R Poulsen, Nicolas Labrière, Nicolas Barbier, David Kenfack, Memiaghe Herve, Pulchérie Bissiengou, Alfonso Alonso, Ghislain Moussavou, Simon Lewis, Kathleen Hibbar

Mapping above-ground biomass in tropical forests with ground-cancelled P-band SAR and limited reference data

This paper introduces the CASINO (CAnopy backscatter estimation, Subsampling, and Inhibited Nonlinear Optimisation) algorithm for above-ground biomass (AGB) estimation in tropical forests using P-band (435 MHz) synthetic aperture radar (SAR) data. The algorithm has been implemented in a prototype processor for European Space Agency's (ESA's) 7th Earth Explorer Mission BIOMASS, scheduled for launch in 2023. CASINO employs an interferometric ground cancellation technique to estimate canopy backscatter (CB) intensity. A power law model (PLM) is then used to model the dependence of CB on AGB for a large number of systematically distributed SAR data samples and a small number of calibration areas with a known AGB. The PLM parameters and AGB for the samples are estimated simultaneously within pre-defined intervals using nonlinear minimisation of a cost function. The performance of CASINO is assessed over six tropical forest sites on two continents: two in French Guiana, South America and four in Gabon, Africa, using SAR data acquired during airborne ESA campaigns and processed to simulate BIOMASS acquisitions. Multiple tests with only two randomly selected calibration areas with AGB > 100 t/ha are conducted to assess AGB estimation performance given limited reference data. At 2.25 ha scale and using a single flight heading, the root-mean-square difference (RMSD) is ≤ 27% for at least 50% of all tests in each test site and using as reference AGB maps derived from airborne laser scanning data. An improvement is observed when two flight headings are used in combination. The most consistent AGB estimation (lowest RMSD variation across different calibration sets) is observed for test sites with a large AGB interval and average AGB around 200–250 t/ha. The most challenging conditions are in areas with AGB < 200 t/ha and large topographic variations. A comparison with 142 1 ha plots distributed across all six test sites and with AGB estimated from in situ measurements gives an RMSD of 20% (66 t/ha)

The Importance of Consistent Global Forest Aboveground Biomass Product Validation

Several upcoming satellite missions have core science requirements to produce data for accurate forest aboveground biomass mapping. Largely because of these mission datasets, the number of available biomass products is expected to greatly increase over the coming decade. Despite the recognized importance of biomass mapping for a wide range of science, policy and management applications, there remains no community accepted standard for satellite-based biomass map validation. The Committee on Earth Observing Satellites (CEOS) is developing a protocol to fill this need in advance of the next generation of biomass-relevant satellites, and this paper presents a review of biomass validation practices from a CEOS perspective. We outline the wide range of anticipated user requirements for product accuracy assessment and provide recommendations for the validation of biomass products. These recommendations include the collection of new, high-quality in situ data and the use of airborne lidar biomass maps as tools toward transparent multi-resolution validation. Adoption of community-vetted validation standards and practices will facilitate the uptake of the next generation of biomass products

Evaluating the potential of full-waveform lidar for mapping pan-tropical tree species richness

AIM: Mapping tree species richness across the tropics is of great interest for effective conservation and biodiversity management. In this study, we evaluated the potential of full‐waveform lidar data for mapping tree species richness across the tropics by relating measurements of vertical canopy structure, as a proxy for the occupation of vertical niche space, to tree species richness. LOCATION: Tropics. TIME PERIOD: Present. MAJOR TAXA STUDIED: Trees. METHODS: First, we evaluated the characteristics of vertical canopy structure across 15 study sites using (simulated) large‐footprint full‐waveform lidar data (22 m diameter) and related these findings to in‐situ tree species information. Then, we developed structure–richness models at the local (within 25–50 ha plots), regional (biogeographical regions) and pan‐tropical scale at three spatial resolutions (1.0, 0.25 and 0.0625 ha) using Poisson regression. RESULTS: The results showed a weak structure–richness relationship at the local scale. At the regional scale (within a biogeographical region) a stronger relationship between canopy structure and tree species richness across different tropical forest types was found, for example across Central Africa and in South America [R^{2} ranging from .44–.56, root mean squared difference as a percentage of the mean (RMSD%) ranging between 23–61%]. Modelling the relationship pan‐tropically, across four continents, 39% of the variation in tree species richness could be explained with canopy structure alone (R^{2} = .39 and RMSD% = 43%, 0.25‐ha resolution). MAIN CONCLUSIONS: Our results may serve as a basis for the future development of a set of structure–richness models to map high resolution tree species richness using vertical canopy structure information from the Global Ecosystem Dynamics Investigation (GEDI). The value of this effort would be enhanced by access to a larger set of field reference data for all tropical regions. Future research could also support the use of GEDI data in frameworks using environmental and spectral information for modelling tree species richness across the tropics

Characterizing tree species diversity in the tropics using full-waveform lidar data

Tree species diversity is of paramount value to maintain forest health and to ensure that forests are able to provide all vital functions, such as creating oxygen, that are needed for mankind to survive. Most of the world’s tree species grow in the tropical region, but many of them are threatened with extinction due to increasing natural and human-induced pressures on the environment. Mapping tree species diversity in the tropics is of high importance to enable effective conservation management of these highly diverse forests. This dissertation explores a new approach to mapping tree species diversity by using information on the vertical canopy structure derived from full-waveform lidar data. This approach is of particular interest in light of the recently launched Global Ecosystem Dynamics Investigation (GEDI), a full-waveform spaceborne lidar. First, successful derivation of vertical canopy structure metrics is ensured by comparing canopy profiles from airborne lidar data to those from terrestrial lidar. Then, the airborne canopy profiles were used to map five successional vegetation types in Lopé National Park in Gabon, Africa. Second, the relationship between vertical canopy structure and tree species richness was evaluated across four study sites in Gabon, which enabled mapping of tree species richness using canopy structure information from full-waveform lidar. Third, the relationship between canopy structure and tree species richness across the tropics was established using field and lidar data collected in 16 study sites across the tropics. Finally, it was evaluated how the methods and applications developed here could be adapted and used for mapping pan-tropical tree species diversity using future GEDI lidar data products

Quantifying Aboveground Biomass in a Tropical Forest Using a Lidar Waveform Weighted Allometric Model

Our knowledge of the distribution and amount of terrestrial above ground biomass (AGB) has increased using lidar technology. Recent advancements in satellite lidar has enabled global mapping of forest biomass and structure. However, there are large biases in satellite lidar estimates which impacts our understanding of carbon dynamics, particularly in tropical forests. Ni-Meister et al. (2022) developed a lidar full waveform weighted height-based allometric model which produced very good results in temperate deciduous/conifer forest in the continental US. The purpose of this study was to evaluate this biomass model in an African tropical forest using the Land Vegetation and Ice Sensor (LVIS) lidar system. The results were compared with field measured AGB derived from a generalized pan-topical AGB equation (Chave et al. 2014). Our analysis shows that the biomass model outperforms two regression based biomass models using LVIS and small footprint lidar data. It performs very well (R2=0.84, RMSE=55.67), producing similar results to the best fitted RH empirical model (R2=0.87, RMSE=49.02). However, the biomass model outperforms the RH model when including the wood density parameter from field data (R2=0.91, RMSE=40.47). The height scaling exponent estimated using site-based allometric relationships from individual tree structure and literature data matches well with the optimal height scaling exponent through fitting the model prediction and field data. Testing in a disturbed/young forest site indicates a slight larger scaling exponent and provide much more accurate AGB estimates for young stands. This result implies that the allometric relationships might be different for young and mature forest stands even for the same forest species. The larger scaling exponent for young stands than mature stands also suggests strong AGBD and height dependence for young stands than mature stands. Our model captures the nature of AGBD dependence on height and crown size structure features. The large returns shown in waveforms for mature trees suggests large dependence ABGD on crown size properties for mature forest stands. Our assessment results that this biomass model can be expanded to estimate AGB density in tropical forest biomes using the GEDI satellite lidar data with good accuracies

The Forest Observation System, building a global reference dataset for remote sensing of forest biomass

International audienceForest biomass is an essential indicator for monitoring the Earth's ecosystems and climate. It is a critical input to greenhouse gas accounting, estimation of carbon losses and forest degradation, assessment of renewable energy potential, and for developing climate change mitigation policies such as REDD+, among others. Wall-to-wall mapping of aboveground biomass (aGB) is now possible with satellite remote sensing (RS). However, RS methods require extant, up-to-date, reliable, representative and comparable in situ data for calibration and validation. Here, we present the Forest Observation System (FOS) initiative, an international cooperation to establish and maintain a global in situ forest biomass database. aGB and canopy height estimates with their associated uncertainties are derived at a 0.25 ha scale from field measurements made in permanent research plots across the world's forests. all plot estimates are geolocated and have a size that allows for direct comparison with many RS measurements. The FOS offers the potential to improve the accuracy of RS-based biomass products while developing new synergies between the RS and ground-based ecosystem research communities