Influence of hydrothermal pretreatment on the pyrolysis of spent grains

Hydrothermal carbonization process (HTC) is a thermochemical process which operates at elevated temperature and pressure, where liquid water is used as a reaction medium [1]. The biomass is converted into a lignite-like solid product called hydrochar [2]. The advantage of hydrothermal treatment is a possibility to convert high moist bio-waste streams without thermal drying. A two-step carbonization process (Figure 5) consisting of HTC and pyrolysis may improve the properties of final biochar (e.g., carbon content, surface area, and electrical conductivity). Hydrothermal conversion occurs using different mechanisms (e.g., hydrolysis and polymerization of intermediates) compared to pyrolysis, due to the liquid water environment, which also improves the heat transfer across the particles [1,3]. Hydrochar can be easily mechanically dewatered, due to higher hydrophobicity than the initial feedstock [2]. The mass of initial biomass is also reduced according to the HTC yield, which results in a lower mass flow of material for pyrolysis reactor and previous drying step. The two-step carbonization concept may spread the range of feedstocks used for biochar production and improve the overall energy efficiency as well as economic feasibility of pyrolysis, using wet biomass streams. Please click Additional Files below to see the full abstract

Qualitative Analysis of the Factors Associated with Whistleblowing Intentions among Athletes from Six European Countries

Although whistleblowing is thought to represent an effective mechanism for detecting and uncovering doping in sport, it has yet to become a widely adopted practice. Understanding the factors that encourage or discourage whistleblowing is of vital importance for the promotion of this practice and the development of pedagogical material to enhance the likelihood of whistleblowing. The current study employed a qualitative methodology to explore the personal and organisational factors that underpin intentions to blow the whistle or that may lead to engagement in whistleblowing behaviours in sport. Thirty-three competitive athletes across a range of sports took part in a semi-structured interview which sought to explore what they would do should they encounter a doping scenario. Content analysis revealed that whistleblowing is a dynamic process characterised by the interaction of a range of personal and organisational factors in determining the intention to report PED use. These factors included moral reasoning, a desire to keep the matter "in-house", perceived personal costs, institutional attitudes to doping, and social support. Analysis revealed a number of 'intervening events' (Ajzen, 1991), including a perceived lack of organisational protection (e.g., ethical leadership) within some sporting sub-cultures, which present an important obstacle to whistleblowing. The intention to report doping was underpinned by a "fairness loyalty trade-off" which involved athletes choosing to adhere to either fairness norms (which relate to a sense that all people and groups are treated equally) or loyalty norms (which reflect preferential treatment towards an in-group) when deciding whether they would blow the whistle. The promotion of fairness norms that emphasise a group's collective interests might encourage athletes to view whistleblowing as a means of increasing group cohesiveness and effectiveness and thereby increase the likelihood of this practice

The sustainable materials roadmap

Over the past 150 years, our ability to produce and transform engineered materials has been responsible for our current high standards of living, especially in developed economies. However, we must carefully think of the effects our addiction to creating and using materials at this fast rate will have on the future generations. The way we currently make and use materials detrimentally affects the planet Earth, creating many severe environmental problems. It affects the next generations by putting in danger the future of the economy, energy, and climate. We are at the point where something must drastically change, and it must change now. We must create more sustainable materials alternatives using natural raw materials and inspiration from nature while making sure not to deplete important resources, i.e. in competition with the food chain supply. We must use less materials, eliminate the use of toxic materials and create a circular materials economy where reuse and recycle are priorities. We must develop sustainable methods for materials recycling and encourage design for disassembly. We must look across the whole materials life cycle from raw resources till end of life and apply thorough life cycle assessments (LCAs) based on reliable and relevant data to quantify sustainability. We need to seriously start thinking of where our future materials will come from and how could we track them, given that we are confronted with resource scarcity and geographical constrains. This is particularly important for the development of new and sustainable energy technologies, key to our transition to net zero. Currently 'critical materials' are central components of sustainable energy systems because they are the best performing. A few examples include the permanent magnets based on rare earth metals (Dy, Nd, Pr) used in wind turbines, Li and Co in Li-ion batteries, Pt and Ir in fuel cells and electrolysers, Si in solar cells just to mention a few. These materials are classified as 'critical' by the European Union and Department of Energy. Except in sustainable energy, materials are also key components in packaging, construction, and textile industry along with many other industrial sectors. This roadmap authored by prominent researchers working across disciplines in the very important field of sustainable materials is intended to highlight the outstanding issues that must be addressed and provide an insight into the pathways towards solving them adopted by the sustainable materials community. In compiling this roadmap, we hope to aid the development of the wider sustainable materials research community, providing a guide for academia, industry, government, and funding agencies in this critically important and rapidly developing research space which is key to future sustainability.journal articl

Recent advances in hydrothermal carbonisation:from tailored carbon materials and biochemicals to applications and bioenergy

Introduced in the literature in 1913 by Bergius, who at the time was studying biomass coalification, hydrothermal carbonisation, as many other technologies based on renewables, was forgotten during the "industrial revolution". It was rediscovered back in 2005, on the one hand, to follow the trend set by Bergius of biomass to coal conversion for decentralised energy generation, and on the other hand as a novel green method to prepare advanced carbon materials and chemicals from biomass in water, at mild temperature, for energy storage and conversion and environmental protection. In this review, we will present an overview on the latest trends in hydrothermal carbonisation including biomass to bioenergy conversion, upgrading of hydrothermal carbons to fuels over heterogeneous catalysts, advanced carbon materials and their applications in batteries, electrocatalysis and heterogeneous catalysis and finally an analysis of the chemicals in the liquid phase as well as a new family of fluorescent nanomaterials formed at the interface between the liquid and solid phases, known as hydrothermal carbon nanodots

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Refined biocarbons for gas adsorption and separation

Nowadays challenges presented by the growing population and excessive consumption of fossil fuels can be overcome by developments of renewable and green technologies for energy production and storage, air depollution and water treatment. For diminution of gaseous pollutants CO2, CH4, and H2S; adsorption processes are in several cases bringing both economic and environment advantages, over other technologies. Zeolites and porous carbon materials are the most popular adsorbents studied for gas capture. Porous carbon materials are studied and used because of affordability, availability, high hydrophobicity, and reusability. They have been popular in applications since long time. The first recorded case dates back to 3750 BC, when Egyptians and Sumerians used wood char for the reduction of copper, zinc and tin ores in the manufacture of bronze. Later on, around 1550 BC, the Egyptians used such carbon materials for medicinal purposes. Present day applications use porous carbons for environmental remediation, gas storage, catalysis and energy storage

Activated Carbon from Palm Date Seeds for CO2 Capture

The process of carbon dioxide capture and storage is seen as a critical strategy to mitigate the so-called greenhouse effect and the planetary climate changes associated with it. In this study, we investigated the CO2 adsorption capacity of various microporous carbon materials originating from palm date seeds (PDS) using green chemistry synthesis. The PDS was used as a precursor for the hydrochar and activated carbon (AC). Typically, by using the hydrothermal carbonization (HTC) process, we obtained a powder that was then subjected to an activation step using KOH, H3PO4 or CO2, thereby producing the activated HTC-PDS samples. Beyond their morphological and textural characteristics, we investigated the chemical composition and lattice ordering. Most PDS-derived powders have a high surface area (>1000 m2 g−1) and large micropore volume (>0.5 cm3 g−1). However, the defining characteristic for the maximal CO2 uptake (5.44 mmol g−1, by one of the alkaline activated samples) was the lattice restructuring that occurred. This work highlights the need to conduct structural and elemental analysis of carbon powders used as gas adsorbents and activated with chemicals that can produce graphite intercalation compounds

Outstanding visible light photocatalysis using nano-TiO₂ hybrids with nitrogen-doped carbon quantum dots and/or reduced graphene oxide

Historically, titanium dioxide (TiO2) has been one of the most extensively studied metal oxide photocatalysts; however, it suffers from a large bandgap and fast charge recombination. We report the use of green, rapid, single-step continuous hydrothermal flow synthesis for the preparation of TiO2, and TiO2 hybrids with reduced graphene oxide (rGO) and/or N-doped carbon quantum dots (NCQDs) with significant enhancement in photocatalytic activity. Using a solar light generator under ambient conditions with no extra oxygen gas added, we observed the evolution reaction of the model pollutant (methylene blue) in real time. Tailoring of the light absorption to match that of the solar spectrum was achieved by a combination of materials of nano-TiO2 hybrids of nitrogen-doped carbon quantum dots and graphene in its reduced form with a photocatalytic rate constant of ca. 25 × 10−5 s−1. Using a diversity of state-of-the-art techniques including high-resolution transmission electron microscopy, transient photoluminescence, X-ray photoelectron spectroscopy and high accuracy, sophisticated hybrid density functional theory calculations we have gained substantial insight into the charge transfer and modulation of the energy band edges of anatase due to the presence of graphene or carbon dots, parameters which play a key role in improving drastically the photocatalytic efficiencies when compared to pristine titania. More importantly, we prove that a combination of features and materials displays the best photocatalytic behaviour. This performance is delivered in a greener synthetic process that not only produces photocatalytic materials with optimised properties and tailored visible light absorption and efficiency but also provides a path to industrialization

Qualitative analysis of the factors associated with whistleblowing intentions among athletes from six European countries

Although whistleblowing is thought to represent an effective mechanism for detecting and uncovering doping in sport, it has yet to become a widely adopted practice. Understanding the factors that encourage or discourage whistleblowing is of vital importance for the promotion of this practice and the development of pedagogical material to enhance the likelihood of whistleblowing. The current study employed a qualitative methodology to explore the personal and organisational factors that underpin intentions to blow the whistle or that may lead to engagement in whistleblowing behaviours in sport. Thirty-three competitive athletes across a range of sports took part in a semi-structured interview which sought to explore what they would do should they encounter a doping scenario. Content analysis revealed that whistleblowing is a dynamic process characterised by the interaction of a range of personal and organisational factors in determining the intention to report PED use. These factors included moral reasoning, a desire to keep the matter “in-house”, perceived personal costs, institutional attitudes to doping, and social support. Analysis revealed a number of “intervening events”, including a perceived lack of organisational protection (e.g.,ethical leadership) within some sporting sub-cultures, which present an important obstacle to whistleblowing. The intention to report doping was underpinned by a “fairness-loyalty trade-off” which involved athletes choosing to adhere to either fairness norms (which relate to a sense that all people and groups are treated equally) or loyalty norms (which reflect preferential treatment towards an in-group) when deciding whether they would blow the whistle. The promotion of fairness norms that emphasise a group’s collective interests might encourage athletes to view whistleblowing as a means of increasing group cohesiveness and effectiveness and thereby increase the likelihood of this practice.</p