418 research outputs found
Encapsulating C59N azafullerene derivatives inside single-wall carbon nanotubes
Filling of single-wall carbon nanotubes with C59N azafullerene derivatives is
reported from toluene solvent at ambient temperature. The filling is
characterized by high resolution transmission electron microscopy and Raman
spectroscopy. The filling efficiency is the same as for C60 fullerenes and the
tube-azafullerene interaction is similar to the tube-C60 interaction. Vacuum
annealing of the encapsulated azafullerene results in the growth of inner
tubes, however no spectroscopic signature of nitrogen built in the inner walls
is detected.Comment: To appear in Carbo
Electronically modified single wall carbon nanohorns with iodine adsorption
Tailoring electronic properties of single wall carbon nanohorn (SWCNH) is expected to develop the application potential in various fields. SWCNH is efficiently modified with iodine molecules by liquid phase adsorption. The adsorption isotherm of iodine on SWCNH was Langmuirian with the saturated adsorption amount of 185 +/- 10 mg g (1) (coverage 0.18), indicating a specific interaction between SWCNH and iodine. The DC electrical conductivity of SWCNH film prepared by dip-coating method increased with the iodine adsorption amount almost by a factor 10.ArticleCHEMICAL PHYSICS LETTERS. 501(4-6):485-490 (2011)journal articl
Low temperature fullerene encapsulation in single wall carbon nanotubes: synthesis of N@C@SWCNT
High filling of single wall carbon nanotubes (SWCNT) with C and
C fullerenes in solvent is reported at temperatures as low as 69
C. A 2 hour long refluxing in n-hexane of the mixture of the fullerene
and SWCNT results in a high yield of C,C@SWCNT, fullerene peapod,
material. The peapod filling is characterized by TEM, Raman and electron energy
loss spectroscopy and X-ray scattering. We applied the method to synthesize the
temperature sensitive (N@C:C)@SWCNT as proved by electron spin
resonance spectroscopy. The solvent prepared peapod samples can be transformed
to double walled nanotubes enabling a high yield and industrially scalable
production of DWCNT
Chemically active substitutional nitrogen impurity in carbon nanotubes
We investigate the nitrogen substitutional impurity in semiconducting zigzag
and metallic armchair single-wall carbon nanotubes using ab initio density
functional theory. At low concentrations (less than 1 atomic %), the defect
state in a semiconducting tube becomes spatially localized and develops a flat
energy level in the band gap. Such a localized state makes the impurity site
chemically and electronically active. We find that if two neighboring tubes
have their impurities facing one another, an intertube covalent bond forms.
This finding opens an intriguing possibility for tunnel junctions, as well as
the functionalization of suitably doped carbon nanotubes by selectively forming
chemical bonds with ligands at the impurity site. If the intertube bond density
is high enough, a highly packed bundle of interlinked single-wall nanotubes can
form.Comment: 4 pages, 4 figures; major changes to the tex
Frequency Shift of Carbon-Nanotube-Based Mass Sensor Using Nonlocal Elasticity Theory
The frequency equation of carbon-nanotube-based cantilever sensor with an attached mass is derived analytically using nonlocal elasticity theory. According to the equation, the relationship between the frequency shift of the sensor and the attached mass can be obtained. When the nonlocal effect is not taken into account, the variation of frequency shift with the attached mass on the sensor is compared with the previous study. According to this study, the result shows that the frequency shift of the sensor increases with increasing the attached mass. When the attached mass is small compared with that of the sensor, the nonlocal effect is obvious and increasing nonlocal parameter decreases the frequency shift of the sensor. In addition, when the location of the attached mass is closer to the free end, the frequency shift is more significant and that makes the sensor reveal more sensitive. When the attached mass is small, a high sensitivity is obtained
Electrochemical immunosensor for the determination of 8-isoprostane aging biomarker using carbon nanohorns-modified disposable electrodes
The first electrochemical immunosensor for the determination of 8-isoprostane (8-iso prostaglandin F2α, ISO), one of the most reliable biomarkers of lipid peroxidation in the human body and of aging related to Alzheimer´s disease or atherosclerosis is reported in this article. Disposable screen-printed carbon electrodes modified with carboxylated carbon nanohorns (CNHs) were employed as scaffolds for covalent immobilization of a specific anti-ISO antibody). A competitive immunoassay involving ISO and HRPlabeled antigen was designed and the determination of ISO was carried out by amperometry at -200 mV using the H2O2/hydroquinone (HQ) system. Under the optimized conditions, the immunosensor provides a linear response for ISO (r2 = 0.998) extending up to 700 pg/mL, which is suitable for the determination of the target compound in human serum. The analytical performance of the immunosensor improves that claimed for ELISA kits in terms of linearity of the calibration plot, precision, with RSD values lower than 1 % , and assay time (1h 30min), and exhibits a low limit of detection, 12 pg/mL, a long storage stability (30 days), and an excellent selectivity against other proteins that may be found in human serum. The analytical utility of the developed immunosensor was demonstrated by determining ISO in two types of human serum samples: lyophilized spiked serum, and real human serum from healthy male and female individuals with good results
Effect of Purity and Substrate on Field Emission Properties of Multi-walled Carbon Nanotubes
Multi-walled carbon nanotubes (MWNT) have been synthesized by chemical vapour decomposition (CVD) of acetylene over Rare Earth (RE) based AB2(DyNi2) alloy hydride catalyst. The as-grown carbon nanotubes were purified by acid and heat treatments and characterized using powder X-ray diffraction, Scanning Electron Microscopy, Transmission Electron Microscopy, Thermo Gravimetric Analysis and Raman Spectroscopy. Fully carbon based field emitters have been fabricated by spin coating a solutions of both as-grown and purified MWNT and dichloro ethane (DCE) over carbon paper with and without graphitized layer. The use of graphitized carbon paper as substrate opens several new possibilities for carbon nanotube (CNT) field emitters, as the presence of the graphitic layer provides strong adhesion between the nanotubes and carbon paper and reduces contact resistance. The field emission characteristics have been studied using an indigenously fabricated set up and the results are discussed. CNT field emitter prepared by spin coating of the purified MWNT–DCE solution over graphitized carbon paper shows excellent emission properties with a fairly stable emission current over a period of 4 h. Analysis of the field emission characteristics based on the Fowler–Nordheim (FN) theory reveals current saturation effects at high applied fields for all the samples
Thermal Conductivity of Carbon Nanotubes and their Polymer Nanocomposites: A Review
Thermally conductive polymer composites offer new possibilities for replacing metal parts in several applications, including power electronics, electric motors and generators, heat exchangers, etc., thanks to the polymer advantages such as light weight, corrosion resistance and ease of processing. Current interest to improve the thermal conductivity of polymers is focused on the selective addition of nanofillers with high thermal conductivity. Unusually high thermal conductivity makes carbon nanotube (CNT) the best promising candidate material for thermally conductive composites. However, the thermal conductivities of polymer/CNT nanocomposites are relatively low compared with expectations from the intrinsic thermal conductivity of CNTs. The challenge primarily comes from the large interfacial thermal resistance between the CNT and the surrounding polymer matrix, which hinders the transfer of phonon dominating heat conduction in polymer and CNT. This article reviews the status of worldwide research in the thermal conductivity of CNTs and their polymer nanocomposites. The dependence of thermal conductivity of nanotubes on the atomic structure, the tube size, the morphology, the defect and the purification is reviewed. The roles of particle/polymer and particle/particle interfaces on the thermal conductivity of polymer/CNT nanocomposites are discussed in detail, as well as the relationship between the thermal conductivity and the micro- and nano-structure of the composite
- …