Psychophysiological Assessment of Buddhist Taiwanese Chanting

The psychophysiological responses and subjective experience correlates of Buddhist chanting were recorded from a 54 year-old female Buddhist monk who performed chanting for approximately 30 to 60 minutes twice daily for 25 years. The measutes included respiration rate from upper thorax, blood volume pulse (BVP) from left middle finger with heart rate derived from BVP, finger temperature from right index finger, skin conductance (SC) from the left index finger and the ring finger and sutface electromyographic (sEMG) from right trapezius and left sternocleidomastoid muscles (SCM) and were recorded during normal chanting sequence which included reading sutra aloud with her eyes open (chanting "The Samanta-Mukha") and silent mental repetition of sutra with the eyes closed (chanting "The Heart Sutra" inside her mind). After chanting she reported feeling peaceful, more relaxation with a total focus of attention and "consciousness"-an experience that was similar to when she chanted in the temple with other monks. The most significant finding was that respiration rate changed from 7.2 br/min during pre-baseline, to 12.1 brlmin during reading sutra aloud, 5.7 brlmin during silent mental repetition of sutra and 7.5 brl/min during post-baseline. Respiratory sinus arrhythmia (RSA) was significantly higher during post-baseline than reading chanting and silent mental repetition of sutra. All physiological measures were significantly different for each condition. This study suggests that the subjective experience associated with chanting can not be attributed to increased RSA and slower breathing as it depends upon the style of chanting. The spiritual experience associated with chanting appears to be evoked through the focused attention on the sutra

A comparison between yellow-green and green cultivars of four vegetable species in pigments, ascorbate, photosynthesis, energy dissipation, and photoinhibition

Yellow-green foliage cultivars of four vegetables grown outdoors, i.e., Chinese mustard (Brassica rapa), Chinese kale (Brassica oleracea var. alboglabra), sweet potato (Ipomoea batatas) and Chinese amaranth (Amaranthus tricolor), had lower chlorophyll (Chl) (a+b) (29-36% of green cultivars of the same species), total carotenoids (46-62%) and ascorbate (72-90%) contents per leaf area. Furthermore, yellow-green cultivars had smaller photosystem II (PSII) antenna size (65-70%) and lower photosynthetic capacity (52-63%), but higher Chl a/b (107-156%) and from low (60%) to high (129%) ratios of de-epoxidized xanthophyll cycle pigments per Chl a content. Potential quantum efficiency of PSII (F(v)/F(m)) of all overnight dark-adapted leaves was ca. 0.8, with no significant difference between yellow-green and green cultivars of the same species. However, yellow-green cultivars displayed a higher degree of photoinhibition (lower F(v)/F(m) after illumination) when they were exposed to high irradiance. Although vegetables used in this study are of either temperate or tropical origin and include both C(3) and C(4) plants, data from all cultivars combined revealed that F(v)/F(m) after illumination still showed a significant positive linear regression with xanthophyll cycle-dependent energy quenching (q(E)) and a negative linear regression with photoinhibitory quenching (q(I)). F(v)/F(m) was, however, not correlated with nonphotochemical quenching (NPQ). Yet, a higher degree of photoinhibition in yellow-green cultivars could recover during the night darkness period, suggesting that the repair of PSII in yellow-green cultivars would allow them to grow normally in the field

Analytical Simulations for Shaking Table Tests of a Full Scale Buckling Restrained Braced Frame

AbstractThe seismic response tests of a full-scale five-story passively-controlled steel building have been conducted on the EDefense shaking table in Japan in March 2009. Before the tests, a blind prediction contest was held to allow researchers and practitioners from all over the world to construct numerical model and predict the dynamic responses of the building frame equipped with buckling restrained braces or viscous dampers. This paper presents the response predictions made before the tests of the buckling restrained braced frame (BRBF). A three-dimensional shell finite element subassembly model was constructed to investigate the stiffness of the buckling-restrained brace end joint. The dynamic test results of the sample steel dampers provided by the organizer were used to calibrate the BRB strength in the numerical model. The details of the numerical model for the composite beam, hollow structural section column, and the beam-to-column panel zone are described. Base on the numerical and test analyses, effective numerical models are presented and the recommended nonlinear modeling techniques for BRBF are provided

Platform success in the international marketplace: reconfiguring digital resources for marketing agility

PurposeThis paper explores how platforms reconfigure versatile digital resources to achieve marketing agility in international markets. Design/methodology/approachWe draw on a case study of a Chinese digital platform to explore the processes and mechanisms of reconfiguring during marketing agility development. Data from different sources are collected, including interviews, informal dialogue and archival data. FindingsVersatile digital resources create productive applications for previously less amendable marketing and nonmarketing resources to be malleable, editable and reconfigurable in marketing agility development. This study identifies and clarifies three versatile digital resource-enabled reconfiguration activities in marketing agility building: recombining digital artifacts, repurposing human capital and cross-pollinating markets. Research limitations/implicationsSince our study adopts a case study method, future research can extend our insights by using quantitative methods to test and verify our theoretical framework. Practical implicationsFirst, we provide insights into how organizations can reconfigure versatile digital resources to achieve the benefits of marketing agility in international markets. Second, while recruiting new employees during internationalization is vital, we suggest that assisted by digital artifacts, firms can repurpose the existing workforce, such as via multitasking, swift task-switching and flexible job redirecting to satisfy dynamic international business requirements with lower adjustment costs. Third, we offer two localization approaches in which firms can use digital artifacts as the enabler to remix sociocultural elements with local adaptations to develop glocal content and decentralize content production to generate inclusive local content. Originality/valueWe provide a process model that specifies how platforms reconfigure versatile digital resources to achieve marketing agility in international markets. Furthermore, we provide novel insights into the literature on marketing agility in international markets and localization

On the Effect of Nb on the Microstructure and Properties of Next Generation Polycrystalline Powder Metallurgy Ni-Based Superalloys

Abstract The effect of Nb on the properties and microstructure of two novel powder metallurgy (P/M) Ni-based superalloys was evaluated, and the results critically compared with the Rolls-Royce alloy RR1000. The Nb-containing alloy was found to exhibit improved tensile and creep properties as well as superior oxidation resistance compared with both RR1000 and the Nb-free variant tested. The beneficial effect of Nb on the tensile and creep properties was due to the microstructures obtained following the post-solution heat treatments, which led to a higher γ′ volume fraction and a finer tertiary γ′ distribution. In addition, an increase in the anti-phase-boundary energy of the γ′ phase is also expected with the addition of Nb, further contributing to the strength of the material. However, these modifications in the γ′ distribution detrimentally affect the dwell fatigue crack-growth behavior of the material, although this behavior can be improved through modified heat treatments. The oxidation resistance of the Nb-containing alloy was also enhanced as Nb is believed to accelerate the formation of a defect-free Cr2O3 scale. Overall, both developmental alloys, with and without the addition of Nb, were found to exhibit superior properties than RR1000.This work was supported by the Rolls-Royce/EPSRC Strategic Partnership under EP/H022309/1, EP/H500375/1 and EP/ M005607/1

Defining a Minimum Set of Standardized Patient-centered Outcome Measures for Macular Degeneration

Purpose To define a minimum set of outcome measures for tracking, comparing, and improving macular degeneration care. Design Recommendations from a working group of international experts in macular degeneration outcomes registry development and patient advocates, facilitated by the International Consortium for Health Outcomes Measurement (ICHOM). Methods Modified Delphi technique, supported by structured teleconferences, followed by online surveys to drive consensus decisions. Potential outcomes were identified through literature review of outcomes collected in existing registries and reported in major clinical trials. Outcomes were refined by the working group and selected based on impact on patients, relationship to good clinical care, and feasibility of measurement in routine clinical practice. Results Standardized measurement of the following outcomes is recommended: visual functioning and quality of life (distance visual acuity, mobility and independence, emotional well-being, reading and accessing information); number of treatments; complications of treatment; and disease control. Proposed data collection sources include administrative data, clinical data during routine clinical visits, and patient-reported sources annually. Recording the following clinical characteristics is recommended to enable risk adjustment: age; sex; ethnicity; smoking status; baseline visual acuity in both eyes; type of macular degeneration; presence of geographic atrophy, subretinal fibrosis, or pigment epithelial detachment; previous macular degeneration treatment; ocular comorbidities. Conclusions The recommended minimum outcomes and pragmatic reporting standards should enable standardized, meaningful assessments and comparisons of macular degeneration treatment outcomes. Adoption could accelerate global improvements in standardized data gathering and reporting of patient-centered outcomes. This can facilitate informed decisions by patients and health care providers, plus allow long-term monitoring of aggregate data, ultimately improving understanding of disease progression and treatment responses

Lipid levels and major adverse cardiovascular events in patients initiated on statins for primary prevention: an international population-based cohort study protocol

Background Clinical guidelines recommend specific targets for low-density lipoprotein cholesterol (LDL-C) and non-high-density lipoprotein cholesterol (non-HDL-C) for primary prevention of cardiovascular disease (CVD). Furthermore, individual variability in lipid response to statin therapy requires assessment of the association in diverse populations.Aim To assess whether lower concentrations of LDL-C and non-HDL-C are associated with a reduced risk of major adverse cardiovascular events (MACE) in primary prevention of CVD.Design & setting An international, new-user, cohort study will be undertaken. It will use data from three electronic health record databases from three global regions: Clinical Practice Research Datalink, UK; PREDICT-CVD, New Zealand (NZ); and the Clinical Data and Analysis Reporting System, Hong Kong (HK).Method New statin users without a history of atherosclerotic CVD, heart failure, or chronic kidney disease, with baseline and follow-up lipid levels will be eligible for inclusion. Patients will be classified according to LDL-C ([less than]1.4, 1.4–1.7, 1.8–2.5, and ≥2.6 mmol/l) and non-HDL-C ([less than] 2.2, 2.2–2.5, 2.6–3.3, and ≥3.4 mmol/l) concentrations 24 months after initiating statin therapy. The primary outcome of interest is MACE, defined as the first occurrence of coronary heart disease, stroke, or cardiovascular death. Secondary outcomes include all-cause mortality and the individual components of MACE. Sensitivity analyses will be conducted using lipid levels at 3 and 12 months after starting statin therapy.Conclusion Results will inform clinicians about the benefits of achieving guideline recommended concentrations of LDL-C for primary prevention of CVD

Search for H→γγ produced in association with top quarks and constraints on the Yukawa coupling between the top quark and the Higgs boson using data taken at 7 TeV and 8 TeV with the ATLAS detector

A search is performed for Higgs bosons produced in association with top quarks using the diphoton decay mode of the Higgs boson. Selection requirements are optimized separately for leptonic and fully hadronic final states from the top quark decays. The dataset used corresponds to an integrated luminosity of 4.5 fb−14.5 fb−1 of proton–proton collisions at a center-of-mass energy of 7 TeV and 20.3 fb−1 at 8 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. No significant excess over the background prediction is observed and upper limits are set on the tt¯H production cross section. The observed exclusion upper limit at 95% confidence level is 6.7 times the predicted Standard Model cross section value. In addition, limits are set on the strength of the Yukawa coupling between the top quark and the Higgs boson, taking into account the dependence of the tt¯H and tH cross sections as well as the H→γγ branching fraction on the Yukawa coupling. Lower and upper limits at 95% confidence level are set at −1.3 and +8.0 times the Yukawa coupling strength in the Standard Model

Search for vectorlike B quarks in events with one isolated lepton, missing transverse momentum, and jets at √s = 8 TeV with the ATLAS detector

A search has been performed for pair production of heavy vectorlike down-type (B) quarks. The analysis explores the lepton-plus-jets final state, characterized by events with one isolated charged lepton (electron or muon), significant missing transverse momentum, and multiple jets. One or more jets are required to be tagged as arising from b quarks, and at least one pair of jets must be tagged as arising from the hadronic decay of an electroweak boson. The analysis uses the full data sample of pp collisions recorded in 2012 by the ATLAS detector at the LHC, operating at a center-of-mass energy of 8 TeV, corresponding to an integrated luminosity of 20.3 fb −1 . No significant excess of events is observed above the expected background. Limits are set on vectorlike B production, as a function of the B branching ratios, assuming the allowable decay modes are B → Wt/Zb/Hb. In the chiral limit with a branching ratio of 100% for the decay B → Wt, the observed (expected) 95% C.L. lower limit on the vectorlike B mass is 810 GeV (760 GeV). In the case where the vectorlike B quark has branching ratio values corresponding to those of an SU(2) singlet state, the observed (expected) 95% C.L. lower limit on the vectorlike B mass is 640 GeV (505 GeV). The same analysis, when used to investigate pair production of a colored, charge 5/3 exotic fermion T 5/3 , with subsequent decay T 5/3 → Wt, sets an observed (expected) 95% C.L. lower limit on the T 5/3 mass of 840 GeV (780 GeV)

Fiducial and differential cross sections of Higgs boson production measured in the four-lepton decay channel in pp collisions at √s = 8 TeV with the ATLAS detector

Measurements of fiducial and differential cross sections of Higgs boson production in the H→ZZ∗ → 4ℓ decay channel are presented. The cross sections are determined within a fiducial phase space and corrected for detection efficiency and resolution effects. They are based on 20.3 fb−¹ of pp collision data, produced at √s = 8 TeV centre-of-mass energy at the LHC and recorded by the ATLAS detector. The differential measurements are performed in bins of transverse momentum and rapidity of the four-lepton system, the invariant mass of the subleading lepton pair and the decay angle of the leading lepton pair with respect to the beam line in the four-lepton rest frame, as well as the number of jets and the transverse momentum of the leading jet. The measured cross sections are compared to selected theoretical calculations of the Standard Model expectations. No significant deviation from any of the tested predictions is found