Russia: Political and Institutional Determinants of Economic Reforms

The purpose of this study is to analyze the course, determinants and political economy of economic reforms in Russia conducted in the period 1985-2003. The year 1985 can be considered an important turning point in Soviet/Russian history, marked as it was by the election of Mikhail Gorbachev to the position of General Secretary of the Communist Party of Soviet Union (CPSU) and (de facto) leader of the USSR. This nomination brought an end to two decades of political consolidation of the communist regime connected with the name of General Secretary Leonid Brezhnev and his short living successors (Yurii Andropov and Konstantin Chernenko), often referred to ex post as 'the stagnation period' (vremya zastoya). Gorbachev initiated a series of important political and (to a lesser extent) economic reforms, which led eventually to the collapse of the communist regime and the disintegration of the Soviet empire in 1991. Thus, 1991 must be seen as another dramatic turning point in Russia's contemporary history. From the end of 1991 onwards political and economic reforms have been carried out by the new Russian state that emerged after the disintegration of the USSR. This paper aims to explain the political and institutional determinants of economic reforms in the Russian Federation. It has been carried out under the Global Research Project on 'Understanding Reforms' organized and financed by the Global Development Network (GDN)1 as one of 30 country studies covering a broad set of developing and transition economies. It presents the project's intermediate results and will be the subject of further discussion as well as analytical and editorial work in the near future. The case of Russia is very important and interesting from the point of view of GRP 'Understanding Reforms' goals and agenda, for many reasons. First, all transitions from communist regimes and centrally-planned economies to democratic capitalism represent a much more complex, complicated and difficult reform experience than policy reforms observed in developing countries, especially when they relate to just one or a few specific policy areas. Thus, learning the transition experience, particularly in its early phase, can provide an extremely valuable empirical input to 'understanding reform' and provide answers to the project's key questions: 'why reform?', 'what reform?', and 'how well did the reform perform?'economic reforms, transition, Russia, reform sequencing, political reforms, institutional reforms, political economy.

Fast Beam Condition Monitor for CMS: performance and upgrade

The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is beam in LHC, and its data acquisition is independent from the data acquisition of the CMS detector, hence it delivers luminosity even when CMS is not taking data. A report is given on the performance of BCM1F during LHC run I, including results of the van der Meer scan and on-line luminosity monitoring done in 2012. In order to match the requirements due to higher luminosity and 25 ns bunch spacing, several changes to the system must be implemented during the upcoming shutdown, including upgraded electronics and precise gain monitoring. First results from Run II preparation are shown.Comment: 10 pages, 8 figures. To be published in NIM A as proceedings for the 9th Hiroshima Symposium on Semiconductor Tracking Detectors (2013

Strontium isotope evidence for Pre-Islamic cotton cultivation in Arabia

With a view to understanding the dynamics of ancient trade and agrobiodiversity, archaeobotanical remains provide a means of tracing the trajectories of certain agricultural commodities. A prime example is cotton in Arabia, a plant that is non-native but has been found in raw seed and processed textile form at Hegra and Dadan, in the region of al-ʿUlā, north-western Saudi Arabia—sites of critical importance given their role in the trans-Arabian trading routes during Antiquity. Here, we demonstrate that the measurement of strontium isotopes from pre-cleaned archaeological cotton is methodologically sound and is an informative addition to the study of ancient plant/textile provenance, in this case, putting forward evidence for local production of cotton in oasis agrosystems and possible external supply. The presence of locally-grown cotton at these sites from the late 1st c. BCE–mid 6th c. CE is significant as it demonstrates that cotton cultivation in Arabia was a Pre-Islamic socio-technical feat, while imported cotton highlights the dynamism of trade at that time

Orphan crops of archaeology-based crop history research

Agrobiodiversity is central to sustainable farming worldwide. Cultivation, conservation and reintroduction of diverse plant species, including ‘forgotten’ and ‘underutilized’ crops, contribute to global agrobiodiversity, living ecosystems and sustainable food production. Such efforts benefit from traditional and historical knowledge of crop plants' evolutionary and cultural trajectories. This review is a first attempt at systematically gauging species representativeness in studies of archaeological plant remains. Results indicate that, in addition to discipline-specific methodological sources of bias, modern agricultural biases may replicate themselves in crop history research and influence understandings of ‘forgotten crops’. Recognizing these biases is an initial stride towards rectifying them and promoting agrobiodiversity in both research and practical applications. Summary: So-called ‘forgotten’ or ‘orphan’ crops are an important component of strategies aimed at preserving and promoting biodiversity. Knowledge of historical cultivation, usage, and geographic and evolutionary trajectories of plants, that is, crop history research, is important for the long-term success of such efforts. However, research biases in the crops chosen for study may present hurdles. This review attempts to systematically identify patterns in crop species representativeness within archaeology-based crop history research. A meta-analysis and synthesis of archaeobotanical evidence (and lack thereof) is presented for 268 species known to have been cultivated for food prior to 1492 CE from the Mediterranean region to South Asia. We identified 39 genera with known crop plants in this geographical and historical context that are currently absent from its archaeobotanical record, constituting ‘orphan’ crops of archaeobotany. In addition, a worldwide synthesis of crop species studied using geometric morphometric, archaeogenetic and stable isotope analyses of archaeological plant remains is presented, and biases in the species represented in these disciplines are discussed. Both disciplinary methodological biases and economic agenda-based biases affecting species representativeness in crop history research are apparent. This study also highlights the limited geographic diffusion of most crops and the potential for deeper historical perspectives on how crops become marginalized and ‘forgotten’

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Penilaian Kinerja Keuangan Koperasi di Kabupaten Pelalawan

This paper describe development and financial performance of cooperative in District Pelalawan among 2007 - 2008. Studies on primary and secondary cooperative in 12 sub-districts. Method in this stady use performance measuring of productivity, efficiency, growth, liquidity, and solvability of cooperative. Productivity of cooperative in Pelalawan was highly but efficiency still low. Profit and income were highly, even liquidity of cooperative very high, and solvability was good

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI

The ABC130 barrel module prototyping programme for the ATLAS strip tracker

For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.Comment: 82 pages, 66 figure

Search for stop and higgsino production using diphoton Higgs boson decays

Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top-quark (stop) and the Higgs boson (higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7 inverse femtobarns of proton-proton collision data at sqrt(s) = 8 TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the stop mass below 360 to 410 GeV, depending on the higgsino mass