Where do islands put their waste? - A material flow and carbon footprint analysis of municipal waste management in the Maltese Islands

Waste management on small islands does not hold any straightforward solutions. The numerous difficulties include limited space availability, restricted recycling and resale opportunities and impacts on the local environment that become magnified particularly when the island is small-sized, densely populated and tourist dependent. The well-documented impact on the local environment includes resource loss, damage to the marine and local environment and continuous nuisances created by littering, trucks and treatment facilities. However, waste management can leave its mark beyond the local borders. The generation and treatment of waste is in fact gaining attention in its connection with greenhouse gas emissions (GHG). Although in the past GHG emissions were mainly associated with energy generation, today it is frequently acknowledged that improved waste management can also mitigate these emissions. This research paper analysis the flows involved in the management of municipal waste (MW) from an island perspective. Focusing on the island of Malta, which consists of 316 km2 and sustains a population density of 1327 people/km2, a Material Flow Analysis together with a carbon footprint is presented for 2012. The same analysis is then made for three prospective scenarios proposed in the Waste Management Plan for the Maltese Islands 2014–2020 using projected 2018 data. With the use of STAN 2.5 (SubSTance Flow ANalysis), a tabled down analysis of the collection, treatment and disposal/export flows involved in the management of Municipal Waste in Malta is presented. The flows are then translated into a carbon footprint analysis using CO2ZW® (a carbon footprint tool for waste management). The objective is to emphasize the relationship between GHG remove GHG and replace with Greenhouse Gas emissions and existing waste management flows and how this relationship changes when different collection, treatment and disposal options are selected. The research’s ultimate aim is therefore to underline the importance of placing climate concerns in waste management policies. The results note that, in terms of carbon emissions, Malta stands to benefit from the introduction of a second Mechanical Biological Treatment plant since carbon emissions will experience an extensive reduction from the 2012 estimates. However, further reduction of carbon emissions should be accompanied by the increase of dry material recycling, separate organic collection and an analysis of the current collection system particularly route optimisation.peer-reviewe

Flexural Properties and Mean Intrinsic Flexural Strength of Old Newspaper Reinforced Polypropylene Composites

Newspapers have a limited lifespan, and therefore represent a focus of used and disposed paper. While these refuses have a considerable value and can be easily recycled, a considerable fraction ends in landfill. The authors show the possibility of adding value to used newspaper and enlarge its value chain. Old newspaper incorporates a high amount of wood fibers able to be used as reinforcement. On the other hand, this material also incorporates inks and other components inherent to newspaper production. In this work, the authors disintegrate old newspaper to recover and individualize wood fibers. A morphological analysis showed that the recovered fibers had aspect ratios higher than 10, revealing, a priori, their strengthening capabilities. Thereupon, these fibers were compounded with polypropylene at different contents, ranging from 20% to 50% w/w. It is well known that wood fibers are hydrophilic, while polyolefin are hydrophobic. This is a drawback to obtaining strong interfaces. Thus, two sets of composites were produced, with and without a coupling agent. The results showed that uncoupled composites increased the flexural strength of the matrix but reached an equilibrium point from which adding more reinforcement did not changer the flexural strength. On the other hand, the coupled composites showed a linear increase of the flexural strength against the reinforcement content. The flexural moduli of the coupled and uncoupled composites were very similar and evolved linearly with the reinforcement content.This research was funded by the University of Girona

Flexural properties and mean intrinsic flexural strength of old newspaper reinforced polypropylene composites

Newspapers have a limited lifespan, and therefore represent a focus of used and disposed paper. While these refuses have a considerable value and can be easily recycled, a considerable fraction ends in landfill. The authors show the possibility of adding value to used newspaper and enlarge its value chain. Old newspaper incorporates a high amount of wood fibers able to be used as reinforcement. On the other hand, this material also incorporates inks and other components inherent to newspaper production. In this work, the authors disintegrate old newspaper to recover and individualize wood fibers. A morphological analysis showed that the recovered fibers had aspect ratios higher than 10, revealing, a priori, their strengthening capabilities. Thereupon, these fibers were compounded with polypropylene at different contents, ranging from 20% to 50% w/w. It is well known that wood fibers are hydrophilic, while polyolefin are hydrophobic. This is a drawback to obtaining strong interfaces. Thus, two sets of composites were produced, with and without a coupling agent. The results showed that uncoupled composites increased the flexural strength of the matrix but reached an equilibrium point from which adding more reinforcement did not changer the flexural strength. On the other hand, the coupled composites showed a linear increase of the flexural strength against the reinforcement content. The flexural moduli of the coupled and uncoupled composites were very similar and evolved linearly with the reinforcement content.Peer ReviewedPostprint (published version

CARB-ES-19 Multicenter Study of Carbapenemase-Producing Klebsiella pneumoniae and Escherichia coli From All Spanish Provinces Reveals Interregional Spread of High-Risk Clones Such as ST307/OXA-48 and ST512/KPC-3.

CARB-ES-19 is a comprehensive, multicenter, nationwide study integrating whole-genome sequencing (WGS) in the surveillance of carbapenemase-producing K. pneumoniae (CP-Kpn) and E. coli (CP-Eco) to determine their incidence, geographical distribution, phylogeny, and resistance mechanisms in Spain. Methods: In total, 71 hospitals, representing all 50 Spanish provinces, collected the first 10 isolates per hospital (February to May 2019); CPE isolates were first identified according to EUCAST (meropenem MIC > 0.12 mg/L with immunochromatography, colorimetric tests, carbapenem inactivation, or carbapenem hydrolysis with MALDI-TOF). Prevalence and incidence were calculated according to population denominators. Antibiotic susceptibility testing was performed using the microdilution method (EUCAST). All 403 isolates collected were sequenced for high-resolution single-nucleotide polymorphism (SNP) typing, core genome multilocus sequence typing (cgMLST), and resistome analysis. Results: In total, 377 (93.5%) CP-Kpn and 26 (6.5%) CP-Eco isolates were collected from 62 (87.3%) hospitals in 46 (92%) provinces. CP-Kpn was more prevalent in the blood (5.8%, 50/853) than in the urine (1.4%, 201/14,464). The cumulative incidence for both CP-Kpn and CP-Eco was 0.05 per 100 admitted patients. The main carbapenemase genes identified in CP-Kpn were bla OXA-48 (263/377), bla KPC-3 (62/377), bla VIM-1 (28/377), and bla NDM-1 (12/377). All isolates were susceptible to at least two antibiotics. Interregional dissemination of eight high-risk CP-Kpn clones was detected, mainly ST307/OXA-48 (16.4%), ST11/OXA-48 (16.4%), and ST512-ST258/KPC (13.8%). ST512/KPC and ST15/OXA-48 were the most frequent bacteremia-causative clones. The average number of acquired resistance genes was higher in CP-Kpn (7.9) than in CP-Eco (5.5). Conclusion: This study serves as a first step toward WGS integration in the surveillance of carbapenemase-producing Enterobacterales in Spain. We detected important epidemiological changes, including increased CP-Kpn and CP-Eco prevalence and incidence compared to previous studies, wide interregional dissemination, and increased dissemination of high-risk clones, such as ST307/OXA-48 and ST512/KPC-3

Table_4_CARB-ES-19 Multicenter Study of Carbapenemase-Producing Klebsiella pneumoniae and Escherichia coli From All Spanish Provinces Reveals Interregional Spread of High-Risk Clones Such as ST307/OXA-48 and ST512/KPC-3.pdf

[Objectives] CARB-ES-19 is a comprehensive, multicenter, nationwide study integrating whole-genome sequencing (WGS) in the surveillance of carbapenemase-producing K. pneumoniae (CP-Kpn) and E. coli (CP-Eco) to determine their incidence, geographical distribution, phylogeny, and resistance mechanisms in Spain.[Methods] In total, 71 hospitals, representing all 50 Spanish provinces, collected the first 10 isolates per hospital (February to May 2019); CPE isolates were first identified according to EUCAST (meropenem MIC > 0.12 mg/L with immunochromatography, colorimetric tests, carbapenem inactivation, or carbapenem hydrolysis with MALDI-TOF). Prevalence and incidence were calculated according to population denominators. Antibiotic susceptibility testing was performed using the microdilution method (EUCAST). All 403 isolates collected were sequenced for high-resolution single-nucleotide polymorphism (SNP) typing, core genome multilocus sequence typing (cgMLST), and resistome analysis.[Results] In total, 377 (93.5%) CP-Kpn and 26 (6.5%) CP-Eco isolates were collected from 62 (87.3%) hospitals in 46 (92%) provinces. CP-Kpn was more prevalent in the blood (5.8%, 50/853) than in the urine (1.4%, 201/14,464). The cumulative incidence for both CP-Kpn and CP-Eco was 0.05 per 100 admitted patients. The main carbapenemase genes identified in CP-Kpn were blaOXA–48 (263/377), blaKPC–3 (62/377), blaVIM–1 (28/377), and blaNDM–1 (12/377). All isolates were susceptible to at least two antibiotics. Interregional dissemination of eight high-risk CP-Kpn clones was detected, mainly ST307/OXA-48 (16.4%), ST11/OXA-48 (16.4%), and ST512-ST258/KPC (13.8%). ST512/KPC and ST15/OXA-48 were the most frequent bacteremia-causative clones. The average number of acquired resistance genes was higher in CP-Kpn (7.9) than in CP-Eco (5.5).[Conclusion] This study serves as a first step toward WGS integration in the surveillance of carbapenemase-producing Enterobacterales in Spain. We detected important epidemiological changes, including increased CP-Kpn and CP-Eco prevalence and incidence compared to previous studies, wide interregional dissemination, and increased dissemination of high-risk clones, such as ST307/OXA-48 and ST512/KPC-3.Peer reviewe

Penilaian Kinerja Keuangan Koperasi di Kabupaten Pelalawan

This paper describe development and financial performance of cooperative in District Pelalawan among 2007 - 2008. Studies on primary and secondary cooperative in 12 sub-districts. Method in this stady use performance measuring of productivity, efficiency, growth, liquidity, and solvability of cooperative. Productivity of cooperative in Pelalawan was highly but efficiency still low. Profit and income were highly, even liquidity of cooperative very high, and solvability was good

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI

Search for stop and higgsino production using diphoton Higgs boson decays

Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top-quark (stop) and the Higgs boson (higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7 inverse femtobarns of proton-proton collision data at sqrt(s) = 8 TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the stop mass below 360 to 410 GeV, depending on the higgsino mass

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio