The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating

This paper investigates the effect of substrate surface finish and deposition conditions of PVD multilayer Inconel 625/Cr coatings on their ability to act as a corrosion-barrier. The corrosion-barrier performance of the coatings was characterized by potentiodynamic testing and salt-spray testing followed by image analysis of the exposed surface; further coating properties were investigated through XRD, SEM, EDX and scratch testing. The results show that multilayering produced the expected improvement in scratch resistance however it did not affect corrosion behaviour. Interrupting the deposition process did not decrease the defect density. Defect density was observed to reduce with decreasing substrate surface finish. The corrosion barrier performance of the multilayer Inconel 625/Cr coating (bp100 nm) was greatly improved for coatings deposited on a polished substrate. For the multilayer Inconel 625/Cr coating system used in this work multilayering and process interruption did not prevent defects from limiting the corrosion barrier effectiveness of the coatings. Corrosion barrier performance was successfully enhanced by the use of low roughness substrates to minimise the defect density

Characterization of steel billet scales generated during the continuous casting process in SIDERPERU steel plant

AbstractTons of waste is produced during iron steel’s industrial production, creating environmental pollution. This work aims to characterize the steel scale formed on the billet surface during the last step of steel production in the SIDERPERU steel plant. Scanning Electron Microscopy (SEM) shows stacked layers one above the other on steel billets scales surface. Energy Dispersive X-ray (EDX) and X-ray Fluorescence (XRF) reveal the high content of Fe and O, with Ca, Si, Mn, and Cr as minority elemental compounds. X-ray Diffraction (XRD) shows FeO, α-Fe2O3 and Fe3O4 as crystallographic phases. Magnetometry reveals Verwey transition and paramagnetic signals that screen the Morin transition. Mössbauer Spectroscopy at room temperature displays magnetic and non-magnetic parts. The non-magnetic part has the hyperfine parameters corresponding to predominant nonstoichiometric wustite. Octahedral (Fe+2/Fe3+) and tetrahedral Fe+3 hyperfine fields of 46.0 and 49.4 T values respectively are associated to nonstoichiometric magnetite and another sextet with a hyperfine field of 52.0 T is related to hematite.</jats:p

Characterization of steel billet scales generated during the continuous casting process in SIDERPERU steel plant

AbstractTons of waste is produced during iron steel’s industrial production, creating environmental pollution. This work aims to characterize the steel scale formed on the billet surface during the last step of steel production in the SIDERPERU steel plant. Scanning Electron Microscopy (SEM) shows stacked layers one above the other on steel billets scales surface. Energy Dispersive X-ray (EDX) and X-ray Fluorescence (XRF) reveal the high content of Fe and O, with Ca, Si, Mn, and Cr as minority elemental compounds. X-ray Diffraction (XRD) shows FeO, α-Fe2O3 and Fe3O4 as crystallographic phases. Magnetometry reveals Verwey transition and paramagnetic signals that screen the Morin transition. Mössbauer Spectroscopy at room temperature displays magnetic and non-magnetic parts. The non-magnetic part has the hyperfine parameters corresponding to predominant nonstoichiometric wustite. Octahedral (Fe+2/Fe3+) and tetrahedral Fe+3 hyperfine fields of 46.0 and 49.4 T values respectively are associated to nonstoichiometric magnetite and another sextet with a hyperfine field of 52.0 T is related to hematite.</jats:p

Isolation and characterization of the TIGA genes, whose transcripts are induced by growth arrest

We report here the isolation of 44 genes that are upregulated after serum starvation and/or contact inhibition. These genes have been termed TIGA, after Transcript Induced by Growth Arrest. We found that there are two kinds of G0 phases caused by serum starvation, namely, the shallow G0 (or G0/G1) and the deep G0 phases. The shallow G0 is induced by only a few hours of serum starvation, while deep G0 is generated after 3 days of serum starvation. We propose that mammalian cells enter deep G0 through a G0 gate, which is only opened on the third day of serum starvation. TIGA1, one of the uncharacterized TIGA genes, encodes a homolog of cyanate permease of bacteria and localizes in mitochondria. This suggests that Tiga1 is involved in the inorganic ion transport and metabolism needed to maintain the deep G0 phase. Ectopic expression of TIGA1 inhibited not only tumor cell proliferation but also anchorage-independent growth of cancer cell lines. A microsatellite marker, ENDL-1, allowed us to detect loss of heterozygosity around the TIGA1 gene region (5q21–22). Further analysis of the TIGA genes we have identified here may help us to better understand the mechanisms that regulate the G0 phase

Intensifying chitin hydrolysis by adjunct treatments – an overview

Chitin is, after cellulose, the most abundant organic natural polysaccharide on Earth, being synthesized as a dominant component in the exoskeletons of crustaceans, among other sources. In the processing of seafood for human consumption, between 40 and 50% of the total raw material mass is wasted, causing a significant problem for the environment due to its slow degradation. Efforts to find uses for chitin derivatives, particularly their oligomers, have intensified since these chemicals are highly functional and offer a wide range of applications, especially as antimicrobial agent. As a consequence, some adjunct treatments, either chemical or physical in nature, have been employed to assist acid and enzymatic hydrolysis. This work provides a detailed review of the methods employed to intensify the formation of chitin oligomers, particularly focusing on the adjunct treatments used (microwave, ultrasonication, steam explosion and gamma irradiation), and evaluate the yield and characteristics of the oligomers formed. Adjunct treatments are more suitable for enzymatic hydrolysis since these treatments modify the chitin structure, and enhance the hydrolysis rate and yield of the oligomers, under milder reaction conditions. For future research, it would be worth trying pre-treatments like the application of high-pressure to chitin in order to lower its crystallinity

Resting Regulatory CD4 T Cells: A Site of HIV Persistence in Patients on Long-Term Effective Antiretroviral Therapy

BACKGROUND: In HIV-infected patients on long-term HAART, virus persistence in resting long-lived CD4 T cells is a major barrier to curing the infection. Cell quiescence, by favouring HIV latency, reduces the risk of recognition and cell destruction by cytotoxic lymphocytes. Several cell-activation-based approaches have been proposed to disrupt cell quiescence and then virus latency, but these approaches have not eradicated the virus. CD4+CD25+ regulatory T cells (Tregs) are a CD4+ T-cell subset with particular activation properties. We investigated the role of these cells in virus persistence in patients on long-term HAART. METHODOLOGY/PRINCIPAL FINDINGS: We found evidence of infection of resting Tregs (HLADR(-)CD69(-)CD25(hi)FoxP3+CD4+ T cells) purified from patients on prolonged HAART. HIV DNA harbouring cells appear more abundant in the Treg subset than in non-Tregs. The half-life of the Treg reservoir was estimated at 20 months. Since Tregs from patients on prolonged HAART showed hyporesponsiveness to cell activation and inhibition of HIV-specific cytotoxic T lymphocyte-related functions upon activation, therapeutics targeting cell quiescence to induce virus expression may not be appropriate for purging the Treg reservoir. CONCLUSIONS: Our results identify Tregs as a particular compartment within the latent reservoir that may require a specific approach for its purging

Chitosan in Plant Protection

Chitin and chitosan are naturally-occurring compounds that have potential in agriculture with regard to controlling plant diseases. These molecules were shown to display toxicity and inhibit fungal growth and development. They were reported to be active against viruses, bacteria and other pests. Fragments from chitin and chitosan are known to have eliciting activities leading to a variety of defense responses in host plants in response to microbial infections, including the accumulation of phytoalexins, pathogen-related (PR) proteins and proteinase inhibitors, lignin synthesis, and callose formation. Based on these and other proprieties that help strengthen host plant defenses, interest has been growing in using them in agricultural systems to reduce the negative impact of diseases on yield and quality of crops. This review recapitulates the properties and uses of chitin, chitosan, and their derivatives, and will focus on their applications and mechanisms of action during plant-pathogen interactions

Magnetic Iron Oxide Nanoparticles: Synthesis and Surface Functionalization Strategies

Surface functionalized magnetic iron oxide nanoparticles (NPs) are a kind of novel functional materials, which have been widely used in the biotechnology and catalysis. This review focuses on the recent development and various strategies in preparation, structure, and magnetic properties of naked and surface functionalized iron oxide NPs and their corresponding application briefly. In order to implement the practical application, the particles must have combined properties of high magnetic saturation, stability, biocompatibility, and interactive functions at the surface. Moreover, the surface of iron oxide NPs could be modified by organic materials or inorganic materials, such as polymers, biomolecules, silica, metals, etc. The problems and major challenges, along with the directions for the synthesis and surface functionalization of iron oxide NPs, are considered. Finally, some future trends and prospective in these research areas are also discussed

Properties of eco-friendly cement mortar contained recycled materials from different sources

Building materials such as sand, cement, bricks, and steel are usually the main components of the construction sector. All these materials are produced from existing natural resources and they will cause substantial damage to the environment as a result of their continuous depletion. Moreover, during the manufacture of various building materials, especially cement, a high concentration of carbon dioxide is constantly emitted into the atmosphere. Therefore, to reduce this environmental damage as well as to save natural resources, this study was performed to recycle the wastes of some of building materials such as marble, granite and porcelain tiles and clay brick through using them as cement and aggregate replacement materials in cement mortar. Sixteen mixtures were cast for this study. In addition to the control, the mortar mixes were divided into five groups, three mixes in each group. In four of the five groups, cement was replaced in three proportions (5%, 10%, 15% by weight) with each of marble, granite, porcelain and clay brick waste powders (passing through 150-μm sieve). The fifth group included 100% replacing (by weight) of the natural sand with the marble, granite and porcelain tiles wastes (with a comparable gradation). The influence of these wastes on flow rate, compressive strength, flexural strength, bulk density, ultrasonic pulse velocity (UPV) and water absorption tests were observed. Results showed that it is possible to produce an eco-friendly mortar made with 100% recycled marble or porcelain aggregate with a significant improvement in the mechanical and durability properties in comparison with natural aggregate mortar