Numerical study of the plastic behaviour in tension of welds in high strength steels

The influence of the mismatch between material properties and constraint on the plastic deformation behaviour of the heat affected zone of welds in high strength steels is investigated in this study, using finite element simulations. An elastoplastic implicit three-dimensional finite element code (EPIM3D) was used in the analysis. The paper presents the mechanical model of the code and the methodology used for the numerical simulation of the tensile test of welded joints. Numerical results of the tensile test of welded samples with different hypothetical widths for the Heat Affected Zone and various material mismatch levels are shown. The analysis concerns the overall strength and ductility of the joint and in relation to the plastic behaviour of the heat affected zone. The influence of the yield stress, tensile strength and constraint on the stress and plastic strain distribution in the soft heat affected zone is also discussed.http://www.sciencedirect.com/science/article/B6TWX-47G3PVT-2/1/f1caf121d3e6678da6f3259e6d795cd

Factors Influencing Performance of Cholangioscopy-Guided Lithotripsy Including Available Different Technologies: A Prospective Multicenter Study with 94 Patients

Background: Peroral cholangioscopy (POC)-guided lithotripsy is an effective treatment for difficult biliary stones. A clear definition of factors associated with the efficacy of POC-guided lithotripsy in one session and the performance of electrohydraulic lithotripsy (EHL) and laser lithotripsy (LL) have not clearly emerged. Methods: This was a non-randomized prospective multicenter study of all consecutive patients who underwent POC lithotripsy (using EHL and/or LL) for difficult biliary stones. The primary endpoint of the study was the number of sessions needed to achieve complete ductal clearance and the factors associated with this outcome. Secondary endpoints included the evaluated efficacies of LL and EHL. Results: Ninety-four patients underwent 113 procedures of EHL or LL. Complete ductal clearance was obtained in 93/94 patients (98.94%). In total, 80/94 patients (85.11%) achieved stone clearance in a single session. In the multivariate analysis, stone size was independently associated with the need for multiple sessions to achieve complete ductal clearance (odds ratio = 1.146, 95% confidence interval: 1.055-1.244; p = 0.001). Using ROC curves and the Youden index, 22 mm was found to be the optimal cutoff for stone size (95% confidence interval: 15.71-28.28; p < 0.001). The majority of the patients (62.8%) underwent LL in the first session. Six patients failed the first session with EHL after using two probes and therefore were crossed over to LL, obtaining ductal clearance in a single additional session with a single LL fiber. EHL was significantly associated with a larger number of probes (2.0 vs. 1.02) to achieve ductal clearance (p < 0.01). The mean procedural time was significantly longer for EHL than for LL [72.1 (SD 16.3 min) versus 51.1 (SD 10.5 min)] (p < 0.01). Conclusions: POC is highly effective for difficult biliary stones. Most patients achieved complete ductal clearance in one session, which was significantly more likely for stones < 22 mm. EHL was significantly associated with the need for more probes and a longer procedural time to achieve ductal clearance.info:eu-repo/semantics/publishedVersio

O conhecimento matemático dos estudantes no início da Licenciatura em Educação Básica: um projeto envolvendo três Escolas superiores de educação

O novo modelo de formação inicial (Decreto-Lei 43/2007) exige que os futuros professores do 1.º e 2.º ciclos do ensino básico e os futuros educadores de infância façam pelo menos 30 ECTS de formação em Matemática na Licenciatura em Educação Básica (LEB), mas a forma e o conteúdo desta formação é da responsabilidade de cada instituição, que define as unidades curriculares, o seu conteúdo e a forma como são lecionadas. Sabe-se que, para além do conteúdo, a forma como o professor aprende tem uma forte influência na forma como vai ensinar. Assim, todos estes aspetos precisam de ser discutidos, tendo por base a investigação já realizada em Portugal e noutros países. Partindo da assunção de que o conhecimento do professor constitui um fator decisivo na interpretação e implementação do currículo e da necessidade de uma discussão alargada de qual deverá ser o conteúdo da formação em Matemática na LEB, as Escolas Superiores de Educação de Lisboa, de Viana do Castelo e de Viseu iniciaram um projeto de investigação que tem como principal objetivo compreender de que modo a formação inicial contribui para o desenvolvimento do conhecimento do professor em Matemática e em Ensino da Matemática e como pode este ser promovido. Uma das questões que o projeto visa investigar é que conhecimento de conteúdo matemático têm os estudantes quando iniciam o curso da LEB. Para caracterizar o conhecimento matemático dos estudantes da LEB, à entrada no curso, foi elaborado um teste diagnóstico, que foi aplicado nas três Escolas Superiores de Educação, em outubro de 2011, a todos os alunos a iniciar o 1.º ano, num total de 268: 143 em Lisboa, 51 em Viseu e 74 em Viana do Castelo. Neste artigo é apresentada uma análise dos principais resultados deste teste bem como as questões e dilemas que aqueles resultados nos colocam

BioTIME: A database of biodiversity time series for the Anthropocene.

MotivationThe BioTIME database contains raw data on species identities and abundances in ecological assemblages through time. These data enable users to calculate temporal trends in biodiversity within and amongst assemblages using a broad range of metrics. BioTIME is being developed as a community-led open-source database of biodiversity time series. Our goal is to accelerate and facilitate quantitative analysis of temporal patterns of biodiversity in the Anthropocene.Main types of variables includedThe database contains 8,777,413 species abundance records, from assemblages consistently sampled for a minimum of 2 years, which need not necessarily be consecutive. In addition, the database contains metadata relating to sampling methodology and contextual information about each record.Spatial location and grainBioTIME is a global database of 547,161 unique sampling locations spanning the marine, freshwater and terrestrial realms. Grain size varies across datasets from 0.0000000158 km2 (158 cm2) to 100 km2 (1,000,000,000,000 cm2).Time period and grainBioTIME records span from 1874 to 2016. The minimal temporal grain across all datasets in BioTIME is a year.Major taxa and level of measurementBioTIME includes data from 44,440 species across the plant and animal kingdoms, ranging from plants, plankton and terrestrial invertebrates to small and large vertebrates.Software format.csv and .SQL

Monitoring Adherence to Asthma Inhalers Using the InspirerMundi App: Analysis of Real-World, Medium-Term Feasibility Studies

Background: Poor medication adherence is a major challenge in asthma and objective assessment of inhaler adherence is needed. InspirerMundi app aims to monitor inhaler adherence while turning it into a positive experience through gamification and social support. Objective: We assessed the medium-term feasibility of the InspirerMundi app to monitor inhaler adherence in real-world patients with persistent asthma (treated with daily inhaled medication). In addition, we attempted to identify the characteristics of the patients related to higher app use. Methods: Two real-world multicenter observational studies, with one initial face-to-face visit and a 4-month telephone interview, were conducted in 29 secondary care centers from Portugal. During an initial face-to-face visit, patients were invited to use the app daily to register their asthma medication intakes. A scheduled intake was considered taken when patients took a photo of the medication (inhaler, blister, or others) using the image-based medication detection tool. Medication adherence was calculated as the number of doses taken as a percentage of the number scheduled. Interacting with the app ≥30 days was used as the cut-off for higher app use. Results: A total of 114 patients {median 20 [percentile 25 to percentile 75 (P25-P75) 16-36] years, 62% adults} were invited, 107 (94%) installed the app and 83 (73%) completed the 4-month interview. Patients interacted with the app for a median of 18 [3-45] days, translated on a median use rate of 15 [3-38]%. Median inhaler adherence assessed through the app was 34 [4-73]% when considering all scheduled inhalations for the study period. Inhaler adherence assessed was not significantly correlated with self-reported estimates. Median adherence for oral and other medication was 41 [6-83]% and 43 [3-73]%, respectively. Patients with higher app use were slightly older (p = 0.012), more frequently taking medication for other health conditions (p = 0.040), and more frequently prescribed long-acting muscarinic antagonists (LAMA, p = 0.024). After 4 months, Control of Allergic Rhinitis and Asthma Test (CARAT) scores improved (p < 0.001), but no differences between patients interacting with the app for 30 days or less were seen. Conclusions: The InspirerMundi app was feasible to monitor inhaler adherence in patients with persistent asthma. The persistent use of this mHealth technology varies widely. A better understanding of characteristics related to higher app use is still needed before effectiveness studies are undertaken.info:eu-repo/semantics/publishedVersio

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Measurement of the top quark pair cross section with ATLAS in pp collisions at √s=7 TeV using final states with an electron or a muon and a hadronically decaying τ lepton

A measurement of the cross section of top quark pair production in proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 7 TeV is reported. The data sample used corresponds to an integrated luminosity of 2.05 fb -1. Events with an isolated electron or muon and a τ lepton decaying hadronically are used. In addition, a large missing transverse momentum and two or more energetic jets are required. At least one of the jets must be identified as originating from a b quark. The measured cross section, σtt-=186±13(stat.)±20(syst.)±7(lumi.) pb, is in good agreement with the Standard Model prediction