Lumped Parameter Model for Silicon Crystal Growth from Granulate Crucible

In the present paper, a lumped parameter model for the novel Silicon Granulate Crucible (SiGC) method is proposed, which is the basis for a future model-based control system for the process. The model is analytically deduced based on the hydromechanical, geometrical, and thermal conditions of the process. Experiments are conducted to identify unknown model parameters and to validate the model. The physical consistency of the model is verified using simulation studies and a prediction error of below 2% is reached. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinhei

The strength of frustration and quantum fluctuations in LiVCuO4

For the 1D-frustrated ferromagnetic J_1-J_2 model with interchain coupling added, we analyze the dynamical and static structure factor S(k,omega), the pitch angle phi of the magnetic structure, the magnetization curve of edge-shared chain cuprates, and focus on LiCuVO4 for which neither a perturbed spinon nor a spin wave approach can be applied. phi is found to be most sensitive to the interplay of frustration and quantum fluctuations. For LiVCuO4 the obtained exchange parameters J are in accord with the results for a realistic 5-band extended Hubbard model and LSDA + U predictions yielding alpha=J_2/|J_1| about 0.75 in contrast to 5.5 > alpha > 1.42 suggested in the literature. The alpha-regime of the empirical phi-values in NaCu2O2 and linarite are considered, too.Comment: 7 pages, 7 figures, (1 figure added), improved text including also the abstract (the present second version has been submitted to EPL 26.10.2011, so far with one missing first referee report

Additive Manufacturing as a Means of Gas Sensor Development for Battery Health Monitoring

Lithium-ion batteries (LIBs) still need continuous safety monitoring based on their intrinsic properties, as well as due to the increase in their sizes and device requirements. The main causes of fires and explosions in LIBs are heat leakage and the presence of highly inflammable components. Therefore, it is necessary to improve the safety of the batteries by preventing the generation of these gases and/or their early detection with sensors. The improvement of such safety sensors requires new approaches in their manufacturing. There is a growing role for research of nanostructured sensor’s durability in the field of ionizing radiation that also can induce structural changes in the LIB’s component materials, thus contributing to the elucidation of fundamental physicochemical processes; catalytic reactions or inhibitions of the chemical reactions on which the work of the sensors is based. A current method widely used in various fields, Direct Ink Writing (DIW), has been used to manufacture heterostructures of Al2O3/CuO and CuO:Fe2O3, followed by an additional ALD and thermal annealing step. The detection properties of these 3D-DIW printed heterostructures showed responses to 1,3-dioxolan (DOL), 1,2-dimethoxyethane (DME) vapors, as well as to typically used LIB electrolytes containing LiTFSI and LiNO3 salts in a mixture of DOL:DME, as well also to LiPF6 salts in a mixture of ethylene carbonate (EC) and dimethyl carbonate (DMC) at operating temperatures of 200 °C–350 °C with relatively high responses. The combination of the possibility to detect electrolyte vapors used in LIBs and size control by the 3D-DIW printing method makes these heterostructures extremely attractive in controlling the safety of batteries

Nanosensors Based on a Single ZnO:Eu Nanowire for Hydrogen Gas Sensing

Fast detection of hydrogen gas leakage or its release in different environments, especially in large electric vehicle batteries, is a major challenge for sensing applications. In this study, the morphological, structural, chemical, optical, and electronic characterizations of ZnO:Eu nanowire arrays are reported and discussed in detail. In particular, the influence of different Eu concentrations during electrochemical deposition was investigated together with the sensing properties and mechanism. Surprisingly, by using only 10 μM Eu ions during deposition, the value of the gas response increased by a factor of nearly 130 compared to an undoped ZnO nanowire and we found an H2gas response of ∼7860 for a single ZnO:Eu nanowire device. Further, the synthesized nanowire sensors were tested with ultraviolet (UV) light and a range of test gases, showing a UV responsiveness of ∼12.8 and a good selectivity to 100 ppm H2gas. A dual-mode nanosensor is shown to detect UV/H2gas simultaneously for selective detection of H2during UV irradiation and its effect on the sensing mechanism. The nanowire sensing approach here demonstrates the feasibility of using such small devices to detect hydrogen leaks in harsh, small-scale environments, for example, stacked battery packs in mobile applications. In addition, the results obtained are supported through density functional theory-based simulations, which highlight the importance of rare earth nanoparticles on the oxide surface for improved sensitivity and selectivity of gas sensors, even at room temperature, thereby allowing, for instance, lower power consumption and denser deployment

Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements