Crystal structure and two-stage hydrolysis of dimethoxo(meso-tetra(4-methoxyphenylporphyrinato))tin(IV), Sn(tmpp)(OMe)(2)

In this work, we determine the crystal structure of dimethoxo(meso-tetra(4-methoxyphenylporphyrinato))tin(IV), Sn(tmpp)(OMe)(2) (1). Experimental results indicate that the tin atom has an octahedral geometry. The geometry around the tin center has Sn(1)-O(5) = 2.020(6), Sn(1)-O(6) = 2.003(7) Angstrom and an average Sn(1)-N = 2.10(1) Angstrom. The two methoxo groups are unidentately coordinated to the tin(IV) atom. Two-stage hydrolysis of Sn(tmpp)(OMe)(2) in CDCl3 was observed by H-1 and C-13 NMR spectroscopy. Compound (1) crystallizes in the space group P2(1)/n with a = 14.7492(1), b = 19.2022(3), c = 16.0806(2) Angstrom, beta = 94.104(1)degrees and Z = 4

Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments

Copyright 2013 ASM International. This paper was published in Metallurgical and Materials Transactions A, 44A(3), 1230 - 1253, and is made available as an electronic reprint with the permission of ASM International. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or modification of the content of this paper are prohibited.Stress corrosion cracking of Al-Zn-Mg-Cu (AA7xxx) aluminum alloys exposed to saline environments at temperatures ranging from 293 K to 353 K (20 °C to 80 °C) has been reviewed with particular attention to the influences of alloy composition and temper, and bulk and local environmental conditions. Stress corrosion crack (SCC) growth rates at room temperature for peak- and over-aged tempers in saline environments are minimized for Al-Zn-Mg-Cu alloys containing less than ~8 wt pct Zn when Zn/Mg ratios are ranging from 2 to 3, excess magnesium levels are less than 1 wt pct, and copper content is either less than ~0.2 wt pct or ranging from 1.3 to 2 wt pct. A minimum chloride ion concentration of ~0.01 M is required for crack growth rates to exceed those in distilled water, which insures that the local solution pH in crack-tip regions can be maintained at less than 4. Crack growth rates in saline solution without other additions gradually increase with bulk chloride ion concentrations up to around 0.6 M NaCl, whereas in solutions with sufficiently low dichromate (or chromate), inhibitor additions are insensitive to the bulk chloride concentration and are typically at least double those observed without the additions. DCB specimens, fatigue pre-cracked in air before immersion in a saline environment, show an initial period with no detectible crack growth, followed by crack growth at the distilled water rate, and then transition to a higher crack growth rate typical of region 2 crack growth in the saline environment. Time spent in each stage depends on the type of pre-crack (“pop-in” vs fatigue), applied stress intensity factor, alloy chemistry, bulk environment, and, if applied, the external polarization. Apparent activation energies (E a) for SCC growth in Al-Zn-Mg-Cu alloys exposed to 0.6 M NaCl over the temperatures ranging from 293 K to 353 K (20 °C to 80 °C) for under-, peak-, and over-aged low-copper-containing alloys (~0.8 wt pct), they are typically ranging from 20 to 40 kJ/mol for under- and peak-aged alloys, and based on limited data, around 85 kJ/mol for over-aged tempers. This means that crack propagation in saline environments is most likely to occur by a hydrogen-related process for low-copper-containing Al-Zn-Mg-Cu alloys in under-, peak- and over-aged tempers, and for high-copper alloys in under- and peak-aged tempers. For over-aged high-copper-containing alloys, cracking is most probably under anodic dissolution control. Future stress corrosion studies should focus on understanding the factors that control crack initiation, and insuring that the next generation of higher performance Al-Zn-Mg-Cu alloys has similar longer crack initiation times and crack propagation rates to those of the incumbent alloys in an over-aged condition where crack rates are less than 1 mm/month at a high stress intensity factor

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Jet size dependence of single jet suppression in lead-lead collisions at sqrt(s(NN)) = 2.76 TeV with the ATLAS detector at the LHC

Measurements of inclusive jet suppression in heavy ion collisions at the LHC provide direct sensitivity to the physics of jet quenching. In a sample of lead-lead collisions at sqrt(s) = 2.76 TeV corresponding to an integrated luminosity of approximately 7 inverse microbarns, ATLAS has measured jets with a calorimeter over the pseudorapidity interval |eta| < 2.1 and over the transverse momentum range 38 < pT < 210 GeV. Jets were reconstructed using the anti-kt algorithm with values for the distance parameter that determines the nominal jet radius of R = 0.2, 0.3, 0.4 and 0.5. The centrality dependence of the jet yield is characterized by the jet "central-to-peripheral ratio," Rcp. Jet production is found to be suppressed by approximately a factor of two in the 10% most central collisions relative to peripheral collisions. Rcp varies smoothly with centrality as characterized by the number of participating nucleons. The observed suppression is only weakly dependent on jet radius and transverse momentum. These results provide the first direct measurement of inclusive jet suppression in heavy ion collisions and complement previous measurements of dijet transverse energy imbalance at the LHC.Comment: 15 pages plus author list (30 pages total), 8 figures, 2 tables, submitted to Physics Letters B. All figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/HION-2011-02

Trans-ancestry genome-wide association study identifies 12 genetic loci influencing blood pressure and implicates a role for DNA methylation

We carried out a trans-ancestry genome-wide association and replication study of blood pressure phenotypes among up to 320,251 individuals of East Asian, European and South Asian ancestry. We find genetic variants at 12 new loci to be associated with blood pressure (P = 3.9 &times; 10-11 to 5.0 &times; 10-21). The sentinel blood pressure SNPs are enriched for association with DNA methylation at multiple nearby CpG sites, suggesting that, at some of the loci identified, DNA methylation may lie on the regulatory pathway linking sequence variation to blood pressure. The sentinel SNPs at the 12 new loci point to genes involved in vascular smooth muscle (IGFBP3, KCNK3, PDE3A and PRDM6) and renal (ARHGAP24, OSR1, SLC22A7 and TBX2) function. The new and known genetic variants predict increased left ventricular mass, circulating levels of NT-proBNP, and cardiovascular and all-cause mortality (P = 0.04 to 8.6 &times; 10-6). Our results provide new evidence for the role of DNA methylation in blood pressure regulation

Measurement of Branching Ratios for ηc\eta_c Hadronic Decays

In a sample of 58 million $J/\psi$ events collected with the BES II detector, the process J/$\psi\to\gamma\eta_c$ is observed in five decay channels: $\eta_c \to K^+K^-\pi^+\pi^-$, $\pi^+\pi^-\pi^+\pi^-$, $K^\pm K^0_S \pi^\mp$ (with $K^0_S\to\pi^+\pi^-$), $\phi\phi$ (with $\phi\to K^+K^-$) and $p\bar{p}$. From these signals, we determine $Br(J/\psi\to\gamma\eta_c)\times Br(\eta_c\to K^+K^-\pi^+\pi^-)$ $=(1.5\pm0.2\pm0.2)\times10^{-4}$, $Br(J/\psi\to\gamma\eta_c)\times Br(\eta_c\to \pi^+\pi^-\pi^+\pi^-)$ $=(1.3\pm0.2\pm0.4)\times10^{-4}$, $Br(J/\psi\to\gamma\eta_c)\times Br(\eta_c\to K^\pm K_{S}^{0}\pi^\mp)$ $=(2.2\pm0.3\pm0.5)\times10^{-4}$, $Br(J/\psi\to\gamma\eta_c)\times Br(\eta_c\to \phi\phi)$ $=(3.3\pm0.6\pm0.6)\times10^{-5}$ and $Br(J/\psi\to\gamma\eta_c)\times Br(\eta_c\to p\bar{p})$ $=(1.9\pm0.3\pm0.3)\times10^{-5}$.Comment: 8 pages, 1 figures and 4 table. Submitted to Phys. Lett.

Measurements of J/psi --> p \bar{p}

The process J/\psi --> p \bar{p} is studied using 57.7 X 10^6 J/\psi events collected with the BESII detector at the Beijing Electron Positron Collider. The branching ratio is determined to be Br(J/\psi --> p \bar{p})=(2.26 +- 0.01 +- 0.14) X 10^{-3}, and the angular distribution is well described by \frac{dN}{d cos\theta_p}=1+\alpha\cos^2\theta_p with \alpha = 0.676 +- 0.036 +- 0.042, where \theta_p is the angle between the proton and beam directions. The value of \alpha obtained is in good agreement with the predictions of first-order QCD.Comment: 6 pages, 2 figures, RevTex4, Submitted to Phys.Lett.

Search for K_S K_S in J/psi and psi(2S) decays

The CP violating processes J/psi-->K_S K_S and psi(2S)-->K_S K_S are searched for using samples of 58 million J/psi and 14 million psi(2S) events collected with the Beijing Spectrometer at the Beijing Electron Positron Collider. No signal is observed, and upper limits on the decay branching ratios are determined to be BR(J/psi-->K_S K_S) K_S K_S) < 4.6x10^{-6} at the 95% confidence level.Comment: 6 pages, 4 figures, submitted to Phys. Lett.

A Study of J/psi-->gamma gamma V(rho,phi) Decays with the BESII Detector

Using a sample of $58\times 10^6$ $J/\psi$ events collected with the BESII detector, radiative decays $J/\psi\to\gamma\gamma V$, where $V=\rho$ or $\phi$, are studied. A resonance around 1420 MeV/c$^2$ (X(1424)) is observed in the $\gamma\rho$ mass spectrum. Its mass and width are measured to be $1424\pm 10(stat)\pm 11(sys)$ MeV/c$^2$ and $101.0\pm 8.8 \pm 8.8$ MeV/c$^2$, respectively, and its branching ratio $B(J/\psi\to \gamma X(1424)\to \gamma \gamma \rho)$ is determined to be $(1.07\pm0.17 \pm 0.11)\times 10^{-4}$. A search for $X(1424)\to \gamma\phi$ yields a 95% C.L. upper limit $B(J/\psi\to \gamma X(1424)\to \gamma\gamma \phi) < 0.82 \times 10^{-4}$.Comment: 10 pages, 5 figures, submitted to PL