Effects of oil and natural or synthetic vitamin E on ruminal and milk fatty acid profiles in cows receiving a high-starch diet

Among trans fatty acids, trans-10,cis-12 CLA has negative effects on cow milk fat production and can affect human health. In high-yielding dairy cows, a shift from the trans-11 to the trans-10 pathway of biohydrogenation (BH) can occur in the rumen of cows receiving high-concentrate diets, especially when the diet is supplemented with unsaturated fat sources. In some but not all experiments, vitamin E has been shown to control this shift. To ascertain the effects of vitamin E on this shift of BH pathway, 2 studies were conducted. The first study explored in vitro the effects of addition of natural (RRR-α-tocopherol acetate) and synthetic (dl-α-tocopherol acetate) vitamin E. Compared with control and synthetic vitamin E, the natural form resulted in a greater trans-10/trans-11 ratio; however, the effect was very low, suggesting that vitamin E was neither a limiting factor for rumen BH nor a modulator of the BH pathway. An in vivo study investigated the effect of natural vitamin E (RRR-α-tocopherol) on this shift and subsequent milk fat depression. Six rumenfistulated lactating Holstein cows were assigned to a 2 × 2 crossover design. Cows received 20-kg DM of a control diet based on corn silage with 22% of wheat, and after 2 wk of adaptation, the diet was supplemented with 600 g of sunflower oil for 2 more weeks. During the last week of this 4-wk experimental period, cows were divided into 2 groups: an unsupplemented control group and a group receiving 11 g of RRR-α-tocopherol acetate per day. A trans-10 shift of ruminal BH associated with milk fat depression due to oil supplementation of a high-wheat diet was observed, but vitamin E supplementation of dairy cows did not result in a reversal toward a trans-11 BH pathway, and did not restore milk fat content

A plasmonically enhanced pixel structure for uncooled microbolometer detectors

This paper introduces a method of broadband absorption enhancement that can be integrated with the conventional suspended microbolometer process with no significant additional cost. The premise of this study is that electric field can be enhanced throughout the structural layer of the microbolometer, resulting in an increase in the absorption of the infrared radiation in the long wave infrared window. A concentric double C-shaped plasmonic geometry is simulated using the FDTD method, and this geometry is fabricated on suspended pixel arrays. Simulation results and FTIR measurements are in good agreement indicating a broadband absorption enhancement in the 8 μm - 12 μm range for LWIR applications. The enhancement is attained using metallic geometries embedded in the structural layer of the suspended microbridge, where the metallic-dielectric interface increases the average absorption of a 35 μm pixel from 67.6% to 80.1%. © 2013 SPIE

An analysis for the broad-band absorption enhancement using plasmonic structures on uncooled infrared detector pixels

This paper introduces an analysis on the absorption enhancement in uncooled infrared pixels using resonant plasmon modes in metal structures, and it reports, for the first time in literature, broad-band absorption enhancement using integrated plasmonic structures in microbolometers for unpolarized long-wave IR detection. Different plasmonic structures are designed and simulated on a stack of layers, namely gold, polyimide, and silicon nitride in order to enhance absorption at the long-wave infrared. The simulated structures are fabricated, and the reflectance measurements are conducted using an FTIR Ellipsometer in the 8-12 μm wavelength range. Finite difference time domain (FDTD) simulations are compared to experimental measurement results. Computational and experimental results show similar spectral reflection trends, verifying broad-band absorption enhancement in the spectral range of interest. Moreover, this paper computationally investigates pixel-wise absorption enhancement by plasmonic structures integrated with microbolometer pixels using the FDTD method. Special attention is given during the design to be able to implement the integrated plasmonic structures with the microbolometers without a need to modify the pre-determined microbolometer process flow. The optimized structure with plasmonic layer absorbs 84 % of the unpolarized radiation in the 8-12 μm spectral range on the average, which is a 22 % increase compared to a reference structure with no plasmonic design. Further improvement may be possible by designing multiply coupled resonant structures. © 2012 SPIE

Exploring the receptor origin of vibration-induced reflexes

STUDY DESIGN: An experimental design. OBJECTIVES: The aim of this study was to determine the latencies of vibration-induced reflexes in individuals with and without spinal cord injury (SCI), and to compare these latencies to identify differences in reflex circuitries. SETTING: A tertiary rehabilitation center in Istanbul. METHODS: Seventeen individuals with chronic SCI (SCI group) and 23 participants without SCI (Control group) were included in this study. Latency of tonic vibration reflex (TVR) and whole-body vibration-induced muscular reflex (WBV-IMR) of the left soleus muscle was tested for estimating the reflex origins. The local tendon vibration was applied at six different vibration frequencies (50, 85, 140, 185, 235, and 265 Hz), each lasting for 15 s with 3-s rest intervals. The WBV was applied at six different vibration frequencies (35, 37, 39, 41, 43, and 45 Hz), each lasting for 15 s with 3-s rest intervals. RESULTS: Mean (SD) TVR latency was 39.7 (5.3) ms in the SCI group and 35.9 (2.7) ms in the Control group with a mean (95% CI) difference of -3.8 (-6.7 to -0.9) ms. Mean (SD) WBV-IMR latency was 45.8 (7.4) ms in the SCI group and 43.3 (3.0) ms in the Control group with a mean (95% CI) difference of -2.5 (-6.5 to 1.4) ms. There were significant differences between TVR latency and WBV-IMR latency in both the groups (mean (95% CI) difference; -6.2 (-9.3 to -3.0) ms, p = 0.0001 for the SCI group and -7.4 (-9.3 to -5.6) ms, p = 0.011 for Control group). CONCLUSIONS: The results suggest that the receptor of origin of TVR and WBV-IMR may be different

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30

Evidence for the Higgs-boson Yukawa coupling to tau leptons with the ATLAS detector

Results of a search for H → τ τ decays are presented, based on the full set of proton-proton collision data recorded by the ATLAS experiment at the LHC during 2011 and 2012. The data correspond to integrated luminosities of 4.5 fb−1 and 20.3 fb−1 at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV respectively. All combinations of leptonic (τ → `νν¯ with ` = e, µ) and hadronic (τ → hadrons ν) tau decays are considered. An excess of events over the expected background from other Standard Model processes is found with an observed (expected) significance of 4.5 (3.4) standard deviations. This excess provides evidence for the direct coupling of the recently discovered Higgs boson to fermions. The measured signal strength, normalised to the Standard Model expectation, of µ = 1.43 +0.43 −0.37 is consistent with the predicted Yukawa coupling strength in the Standard Model

Measurement of the top pair production cross section in 8 TeV proton-proton collisions using kinematic information in the lepton plus jets final state with ATLAS

A measurement is presented of the $t\bar{t}$ inclusive production cross-section in $pp$ collisions at a center-of-mass energy of $\sqrt{s}=8$ TeV using data collected by the ATLAS detector at the CERN Large Hadron Collider. The measurement was performed in the lepton+jets final state using a data set corresponding to an integrated luminosity of 20.3 fb$^{-1}$. The cross-section was obtained using a likelihood discriminant fit and $b$-jet identification was used to improve the signal-to-background ratio. The inclusive $t\bar{t}$ production cross-section was measured to be $260\pm 1{\textrm{(stat.)}} ^{+22}_{-23} {\textrm{(syst.)}}\pm 8{\textrm{(lumi.)}}\pm 4{\mathrm{(beam)}}$ pb assuming a top-quark mass of 172.5 GeV, in good agreement with the theoretical prediction of $253^{+13}_{-15}$ pb. The $t\bar{t}\to (e,\mu)+{\mathrm{jets}}$ production cross-section in the fiducial region determined by the detector acceptance is also reported.Comment: Published version, 19 pages plus author list (35 pages total), 3 figures, 2 tables, all figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/TOPQ-2013-06