Creation of Structural Polymer Composite Materials for Functional Application Using Physicochemical Modification

The various aspects of physico-chemical modification of the components of structural materials of functional application based on classical composites and nanocomposites are analyzed. Potential applications of such materials are briefly described. Ultrasonic cavitation treatment is considered as a basic method of physical modification when obtaining the indicated classes of composites. The influence of ultrasonic treatment modes on the technological and operational properties of reactoplastic polymers, as well as on the hardening of reinforced composites based on them, is investigated. Technical means of ultrasonic cavitation processing of liquid binders and polymer composites based on them are briefly described. An effective spectrum of interrelated structural and technological parameters of ultrasonic treatment has been characterized, which is established by calculation and experimentally-statistically. The design issues of the technological processes of obtaining polymer composites of functional application are analyzed. The efficiency of creating carbon fiber composite materials, as well as the prospects for creating of these materials based on reinforcing fabric with nanomodified fillers is described. The methods of obtaining functional nanomodified carbon-composites with improved physicomechanical and operational properties, in particular with increased strength and electrical conductivity, are characterized. The effectiveness of the ultrasonic treatment and production of nanomodified thermoplastic composite materials by extrusion method is considered. Some issues of forming products from intelligent polymer composites are analyzed. The results of the survey can be used in the design of advanced technologies for the creation of functional polymer composites of functional application

Use of Physicochemical Modification Methods for Producing Traditional and Nanomodified Polymeric Composites with Improved Operational Properties

Various aspects of the methods of physical and physicochemical modification of components of filled thermo-plastic composite materials are analyzed, aimed at improving the surface properties of the fillers and the technological properties of the polymer matrix during their interaction. It is noted that the improvement of the interfacial interaction of the components of polymer reactoplastic composites, including adhesive strength, is a key factor for improving the reliability of the cured filled composite. As a promising area of research, a modification of the surface of the reinforcing fibrous filler and the technological characteristics of the liquid polymer binder, aimed at increasing their contact properties in the composite was chosen. The effectiveness of the physical method of modifying the components of composites in the form of low-frequency ultrasonic processing is described. The peculiarities of cluster formation and physicochemical modification of epoxy polymers filled with dispersed fillers are analyzed. Attention is focused on the effectiveness of ultrasonic processing in cavitation mode for deagglomeration and uniform distribution of nanoparticles in a liquid medium during the creation of nanocomposites. Experimentally confirmed the improvement of the technological properties of liquid epoxy polymers, modified by ultrasound, used for the impregnation of oriented fibrous fillers, as well as the improvement of the physicomechanical properties of the sonicated epoxy matrices

An embedding technique to determine ττ backgrounds in proton-proton collision data

An embedding technique is presented to estimate standard model tau tau backgrounds from data with minimal simulation input. In the data, the muons are removed from reconstructed mu mu events and replaced with simulated tau leptons with the same kinematic properties. In this way, a set of hybrid events is obtained that does not rely on simulation except for the decay of the tau leptons. The challenges in describing the underlying event or the production of associated jets in the simulation are avoided. The technique described in this paper was developed for CMS. Its validation and the inherent uncertainties are also discussed. The demonstration of the performance of the technique is based on a sample of proton-proton collisions collected by CMS in 2017 at root s = 13 TeV corresponding to an integrated luminosity of 41.5 fb(-1).Peer reviewe

Bose-Einstein correlations of charged hadrons in proton-proton collisions at s\sqrt s = 13 TeV

Bose-Einstein correlations of charged hadrons are measured over a broad multiplicity range, from a few particles up to about 250 reconstructed charged hadrons in proton-proton collisions at $\sqrt{s}$ = 13 TeV. The results are based on data collected using the CMS detector at the LHC during runs with a special low-pileup configuration. Three analysis techniques with different degrees of dependence on simulations are used to remove the non-Bose-Einstein background from the correlation functions. All three methods give consistent results. The measured lengths of homogeneity are studied as functions of particle multiplicity as well as average pair transverse momentum and mass. The results are compared with data from both CMS and ATLAS at $\sqrt{s}$ = 7 TeV, as well as with theoretical predictions.[graphic not available: see fulltext]Bose-Einstein correlations of charged hadrons are measured over a broad multiplicity range, from a few particles up to about 250 reconstructed charged hadrons in proton-proton collisions at $\sqrt{s} =$ 13 TeV. The results are based on data collected using the CMS detector at the LHC during runs with a special low-pileup configuration. Three analysis techniques with different degrees of dependence on simulations are used to remove the non-Bose-Einstein background from the correlation functions. All three methods give consistent results. The measured lengths of homogeneity are studied as functions of particle multiplicity as well as average pair transverse momentum and mass. The results are compared with data from both CMS and ATLAS at $\sqrt{s} =$ 7 TeV, as well as with theoretical predictions

Measurement of t(t)over-bar normalised multi-differential cross sections in pp collisions at root s=13 TeV, and simultaneous determination of the strong coupling strength, top quark pole mass, and parton distribution functions

Peer reviewe

Search for dark matter in events with a leptoquark and missing transverse momentum in proton-proton collisions at 13 TeV

A search is presented for dark matter in proton-proton collisions at a center-of-mass energy of root s= 13 TeV using events with at least one high transverse momentum (p(T)) muon, at least one high-p(T) jet, and large missing transverse momentum. The data were collected with the CMS detector at the CERN LHC in 2016 and 2017, and correspond to an integrated luminosity of 77.4 fb(-1). In the examined scenario, a pair of scalar leptoquarks is assumed to be produced. One leptoquark decays to a muon and a jet while the other decays to dark matter and low-p(T) standard model particles. The signature for signal events would be significant missing transverse momentum from the dark matter in conjunction with a peak at the leptoquark mass in the invariant mass distribution of the highest p(T) muon and jet. The data are observed to be consistent with the background predicted by the standard model. For the first benchmark scenario considered, dark matter masses up to 500 GeV are excluded for leptoquark masses m(LQ) approximate to 1400 GeV, and up to 300 GeV for m(LQ) approximate to 1500 GeV. For the second benchmark scenario, dark matter masses up to 600 GeV are excluded for m(LQ) approximate to 1400 GeV. (C) 2019 The Author(s). Published by Elsevier B.V.Peer reviewe

Search for an L-mu - L-tau gauge boson using Z -> 4 mu events in proton-proton collisions at root s=13 TeV

A search for a narrow Z' gauge boson with a mass between 5 and 70 GeV resulting from an L-mu - L-tau U (1) local gauge symmetry is reported. Theories that predict such a particle have been proposed as an explanation of various experimental discrepancies, including the lack of a dark matter signal in direct-detection experiments, tension in the measurement of the anomalous magnetic moment of the muon, and reports of possible lepton flavor universality violation in B meson decays. A data sample of proton-proton collisions at a center-of-mass energy of 13 TeV is used, corresponding to an integrated luminosity of 77.3 fb(-1) recorded in 2016 and 2017 by the CMS detector at the LHC. Events containing four muons with an invariant mass near the standard model Z boson mass are analyzed, and the selection is further optimized to be sensitive to the events that may contain Z -> Z'mu mu -> 4 mu decays. The event yields are consistent with the standard model predictions. Upper limits of 10(-8)-10(-7) at 95% confidence level are set on the product of branching fractions B(Z -> Z'mu mu)B(Z' -> mu mu), depending on the Z' mass, which excludes a Z' boson coupling strength to muons above 0.004-0.3. These are the first dedicated limits on L-mu - L-tau models at the LHC and result in a significant increase in the excluded model parameter space. The results of this search may also be used to constrain the coupling strength of any light Z' gauge boson to muons. (C) 2019 The Author(s). Published by Elsevier B.V.Peer reviewe

Measurement of electroweak WZ boson production and search for new physics in WZ + two jets events in pp collisions at √s=13TeV

A measurement of WZ electroweak (EW) vector boson scattering is presented. The measurement is performed in the leptonic decay modes WZ→ℓνℓ′ℓ′, where ℓ,ℓ′=e,μ. The analysis is based on a data sample of proton-proton collisions at √s=13 TeV at the LHC collected with the CMS detector and corresponding to an integrated luminosity of 35.9 fb−1. The WZ plus two jet production cross section is measured in fiducial regions with enhanced contributions from EW production and found to be consistent with standard model predictions. The EW WZ production in association with two jets is measured with an observed (expected) significance of 2.2 (2.5) standard deviations. Constraints on charged Higgs boson production and on anomalous quartic gauge couplings in terms of dimension-eight effective field theory operators are also presented