Microgeographic adaptation and the effect of pollen flow on the adaptive potential of a temperate tree species

Recent interest for microgeographic adaptation, i.e. adaptation at spatial scales compatible with substantial amount of gene dispersal, offers to reconsider the scale at which evolution occurs (Richardson et al. 2014). Whether gene flow is constraining or facilitating local adaptation at this fine spatial scale remains an unresolved question. Too important gene flow would overwhelm the effects of natural selection and decrease local adaptation along environmental gradients. Conversely, gene flow, and particularly long-distance dispersal events, could play a major role in resupplying the genetic variation of populations and favouring the spread of beneficial alleles (Kremer et al. 2012). Hence, the high dispersal capacities of trees are often assumed to be the main process maintaining the large levels of genetic variation measured in their natural populations. However, evidences for microgeographic adaptation and the quantitative assessment of the impact of gene flow on adaptive genetic variation are still limited in most temperate trees. Here, we sampled 60 open-pollinated families of European beech (Fagus sylvatica L.) from three natural plots, spreading along a short elevation gradient (∼1.5 km) at the warm margin of this species distribution. We analysed the phenotypic and genotypic data of ∼2,300 seedlings grown in a common garden. We focused on 11 potentially adaptive traits with significant heritabilities (Gauzere et al. 2016) and tested for signature of local selection on quantitative trait differentiation. We then identified the offspring likely originating from local or distant pollen immigration events and quantified the role of gene flow in increasing locally the additive variance of traits under selection. We found a significant signal of adaptive differentiation among plots separated by less than one kilometre, with local selection acting on growth and phenological traits. We found that trees in the plots at high elevation, experiencing the lowest temperature conditions, flushed earlier and had a higher height and diameter growth in our common garden than trees from the plot at low elevation. Beech populations originating from higher longitude or elevation have also been shown to be genetically earlier in provenance tests, suggesting that these populations evolved phenological traits promoting a longer vegetation period. At this southern margin of the species, the reduced allocation to stem growth at the low elevation plot is likely an adaptive response to drought, which has previously been described by comparing marginal vs central beech populations. Consistently with theoretical expectations, our results suggest a beneficial effect of pollen dispersal by increasing the genetic diversity for these locally differentiated traits. These effects were quantitatively high, with more than twice higher genetic variance for immigrant than local offspring, although with large standard errors around estimates. Our results highlight that local selection is an important evolutionary force in natural tree populations, and provide a strong evidence that adaptive genetic differentiation can occur despite high gene flow. For the two genetically differentiated traits, our analyses suggested a beneficial effect of pollen dispersal by increasing genetic diversity after one episode of reproduction. The findings suggest that conservation and management interventions to facilitate movement of gametes along short ecological gradients would boost genetic diversity of individual tree populations, and thereby enhance their adaptive potential

Assortative mating and differential male mating success in an ash hybrid zone population

BACKGROUND: The structure and evolution of hybrid zones depend mainly on the relative importance of dispersal and local adaptation, and on the strength of assortative mating. Here, we study the influence of dispersal, temporal isolation, variability in phenotypic traits and parasite attacks on the male mating success of two parental species and hybrids by real-time pollen flow analysis. We focus on a hybrid zone population between the two closely related ash species Fraxinus excelsior L. (common ash) and F. angustifolia Vahl (narrow-leaved ash), which is composed of individuals of the two species and several hybrid types. This population is structured by flowering time: the F. excelsior individuals flower later than the F. angustifolia individuals, and the hybrid types flower in-between. Hybrids are scattered throughout the population, suggesting favorable conditions for their local adaptation. We estimate jointly the best-fitting dispersal kernel, the differences in male fecundity due to variation in phenotypic traits and level of parasite attack, and the strength of assortative mating due to differences in flowering phenology. In addition, we assess the effect of accounting for genotyping error on these estimations. RESULTS: We detected a very high pollen immigration rate and a fat-tailed dispersal kernel, counter-balanced by slight phenological assortative mating and short-distance pollen dispersal. Early intermediate flowering hybrids, which had the highest male mating success, showed optimal sex allocation and increased selfing rates. We detected asymmetry of gene flow, with early flowering trees participating more as pollen donors than late flowering trees. CONCLUSION: This study provides striking evidence that long-distance gene flow alone is not sufficient to counter-act the effects of assortative mating and selfing. Phenological assortative mating and short-distance dispersal can create temporal and spatial structuring that appears to maintain this hybrid population. The asymmetry of gene flow, with higher fertility and increased selfing, can potentially confer a selective advantage to early flowering hybrids in the zone. In the event of climate change, hybridization may provide a means for F. angustifolia to further extend its range at the expense of F. excelsior

Polarized Atomic Hydrogen Beam Tests in the Michigan Ultra‐Cold Jet Target

Progress on the Michigan ultra‐cold proton‐spin‐polarized atomic hydrogen Jet target is presented. We describe the present status of the Jet and some beam test results. © 2003 American Institute of PhysicsPeer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87681/2/872_1.pd

White-light phosphorescence emission from a single molecule: application to OLED

A simple mononuclear cyclometallated iridium(III) complex exhibits white photo- and electro- luminescence in the wavelength range from 440 to 800 nm, which originates from a single emitting excited state of mixed character.Bolink Henk, [email protected] ; Coronado Miralles, Eugenio, [email protected]

Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS

The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Measurement of the flavour composition of dijet events in pp collisions at root s=7 TeV with the ATLAS detector

This paper describes a measurement of the flavour composition of dijet events produced in pp collisions at √s=7 TeV using the ATLAS detector. The measurement uses the full 2010 data sample, corresponding to an integrated luminosity of 39 pb−1. Six possible combinations of light, charm and bottom jets are identified in the dijet events, where the jet flavour is defined by the presence of bottom, charm or solely light flavour hadrons in the jet. Kinematic variables, based on the properties of displaced decay vertices and optimised for jet flavour identification, are used in a multidimensional template fit to measure the fractions of these dijet flavour states as functions of the leading jet transverse momentum in the range 40 GeV to 500 GeV and jet rapidity |y|<2.1. The fit results agree with the predictions of leading- and next-to-leading-order calculations, with the exception of the dijet fraction composed of bottom and light flavour jets, which is underestimated by all models at large transverse jet momenta. The ability to identify jets containing two b-hadrons, originating from e.g. gluon splitting, is demonstrated. The difference between bottom jet production rates in leading and subleading jets is consistent with the next-to-leading-order predictions

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011