1,446 research outputs found

    Diplomado de profundización CISCO.

    Get PDF
    Luego del estudio de los capítulos de la plataforma de cisco y la realización de las actividades requeridas durante el desarrollo de la asignatura, realizando la ejecución del plan de pruebas para la configuración y comunicación de los diferentes elementos que compongan la topología de cada escenario procedemos a crear el presente documento, que se realiza con el fin de presentar el desarrollo de los ejercicios de la prueba final de habilidades, para dar solución a estos escenarios se requirió aplicar los conceptos y habilidades adquiridos durante el desarrollo de los diferentes capítulos y actividades vistos, mediante los cuales se obtuvo la información sobre los diferentes elementos que conforman una red, protocolos de enrutamiento, parámetros de seguridad y acceso en diferentes dispositivos en la red, además de las configuraciones OSPF, EIGRP, implementación DHCP, NAT, verificación de ACL. Estos escenarios se diseñaron y configuraron según la topología y requerimientos básicos dados, en la aplicación Packet Tracer que permite construir y ejecutar topologías de red. En el escenario 1 se monta y desarrolla un red que requiere de la aplicación de los conocimientos en cuanto a configuración de los hosts necesarios y en una tabla la cual contiene el direccionamiento de cada uno de ellos, así como los servicios ACL, EIGRP, enlaces troncales y la implementación de las configuraciónes. En cuanto al escenario 2, se requerirá la aplicación de conocimientos y competencias en la implementación del enrutamiento VLAN, OSPF, Servicio DHCP y configuración de NAT estáticos y de sobrecarga, adicionalmente administrar los accesos a través de una lista de control de accesoAfter studying the chapters of the cisco platform and carrying out the activities required during the development of the subject, carrying out the test plan for the configuration and communication of the different elements that make up the topology of each scenario we proceed to To create this document, which is carried out in order to present the development of the final skills test exercises, to solve these scenarios, it was required to apply the concepts and skills acquired during the development of the different chapters and activities seen, through which information was obtained on the different elements that make up a network, routing protocols, security parameters and access on different devices in the network, in addition to the OSPF, EIGRP, DHCP implementation, NAT, ACL verification settings. These scenarios were designed and configured according to the topology and basic requirements given, in the Packet Tracer application that allows the construction and execution of network topologies. In scenario 1, a network is developed and developed that requires the application of knowledge in terms of configuration of the necessary hosts and in a table which contains the address of each of them, as well as the ACL, EIGRP services, links Trunks and the implementation of the configurations. As for scenario 2, the application of knowledge and skills in the implementation of VLAN routing, OSPF, DHCP service and static and overload NAT configuration will be required, additionally managing access through an access control lis

    High-throughput biointerfaces for direct, label-free, and multiplexed metaplasmonic biosensing

    Get PDF
    In recent years, metaplasmonic biosensors have emerged as a novel counterpart of well-established plasmonic biosensors based on thin metallic layers. Metaplasmonic biosensors offer high potential for sensor miniaturiza-tion, extreme sensitivity biosensing, and high multiplexing capabilities with detection methods free of coupling optical elements. These capabilities make metaplasmonic biosensors highly attractive for Point-of-Care and handled/portable devices or novel On-Chip devices; as a result, it has increased the number of prototypes and potential applications that emerged during the last years. One of the main challenges to achieving fully operative devices is the achievement of high-throughput biointerfaces for sensitive and selective biodetection in complex media. Despite the superior surface sensitivity achieved by metaplasmonic sensors compared to conventional plasmonic sensors based on metallic thin films, the main limitations to achieving high-throughput and multiplexed biosensing usually are associated with the sensitivity and selectivity of the bioin-terface and, as a consequence, their application to the direct analysis of real complex samples. This graphical review discusses the potential challenges and capabilities of different biofunctionalization strategies, biorecog-nition elements, and antifouling strategies to achieve scalable and high-throughput metaplasmonic biosensing for Point-of-Care devices and bioengineering applications like Organs-On-Chip

    A continuous method for arsenic removal from groundwater using hybrid biopolymer-iron-nanoaggregates: improvement through factorial designs

    Get PDF
    BACKGROUND: Due to a variety of toxicological problems, the presence of As(V) in aquifers is a significant concern. Sorption using chitosan doped with iron nanoaggregates results in a green and cheap methodology for its elimination. RESULTS: The hybrid sorbent was characterized by SEM, EDS, TGA, XRD, and FTIR spectroscopy. Its stability against pH and time was determined by ICP-MS, while conventional analytical techniques verified its Fe content. The sum of an individual As(V) removal capacity by chitosan and iron nanoaggregates was smaller than that of the hybrid sorbent, indicating the existence of synergy. CONCLUSION: This study demonstrates the great capacity of the hybrid sorbent to eliminate As(V) working with a continuous system (columns). The additional use of a factorial design allows for determining of optimal operating values to optimize two responses. In other words, in this multi-response system, column service time (tb) was minimized and, at the same time, it maximized the volumes of purified water obtained ([As(V)] <0.05 m L−1) using desirability function.Fil: Batistelli, Marianela. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario. Instituto de Química Rosario. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas. Instituto de Química Rosario; ArgentinaFil: Perez Mora, Barbara Edith. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario. Instituto de Química Rosario. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas. Instituto de Química Rosario; Argentina. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmaceuticas. Departamento de Química y Física; ArgentinaFil: Mangiameli, María Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario. Instituto de Física de Rosario. Universidad Nacional de Rosario. Instituto de Física de Rosario; Argentina. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmaceuticas. Departamento de Química y Física; ArgentinaFil: Mamana, Nadia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario. Instituto de Física de Rosario. Universidad Nacional de Rosario. Instituto de Física de Rosario; Argentina. Universidad Nacional de Rosario. Facultad de Ciencias Exactas, Ingeniería y Agrimensura. Laboratorio de Materiales Cerámicos; ArgentinaFil: Lopez, Gerardo. NANOTEK S.A. Parque Tecnológico Litoral Centro; ArgentinaFil: Goddio, María F.. NANOTEK S.A. Parque Tecnológico Litoral Centro; ArgentinaFil: Bellú, Sebastián Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario. Instituto de Química Rosario. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas. Instituto de Química Rosario; Argentina. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmaceuticas. Departamento de Química y Física; ArgentinaFil: González, Juan Carlos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario. Instituto de Química Rosario. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas. Instituto de Química Rosario; Argentina. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmaceuticas. Departamento de Química y Física; Argentin

    Characterization of the Flash-LED Lamp: EBNeuro Used to Acquired Visual Evoked Potentials in Rats

    Get PDF
    El propósito de esta investigación fue caracterizar espacialmente la intensidad luminosa promedio de la lámpara Flash LED (marca EBNeuro-Italia) para evaluar si es apta como fuente de estimulación visual para la adquisición de PEVs en un modelo murino.La señal de la amplitud en análisis de Potenciales Evocados Visuales (PEVs) es una variable que depende del tipo de los electrodos, de la fuente luminosa, del estímulo visual y por consecuente, de la intensidad luminosa por lo que es fundamental reportarla para cada diseño experimental y así, garantizar su reproducibilidad. El objetivo de este trabajo es caracterizar una lámpara con 96 LEDs para la adquisición de PEVs en ratas. Se midió la iluminancia y la intensidad luminosa promedio en un sistema espacial XYZ de 8 cm3 aplicable a un sistema estereotáxico para la fijación de ratas. Se realizaron desplazamientos cada 2 cm en cada plano. Se observó que debido a la distribución geométrica de los LEDs la distribución de la iluminancia no sigue la ley del inverso cuadrado, ya que aumenta conforme la lámpara se aleja. Finalmente, se seleccionó una coordenada para la colocación del ojo de la rata empleando una intensidad luminosa promedio para la adquisición del PEV de 1.043 cd e iluminancia de 128.77 luxes a una distancia ojo-lámpara de 9 cm. Una vez caracterizada la intensidad luminosa y de acuerdo con los PEVs obtenidos, esta lámpara puede utilizarse para estudios PEV en ratas en investigaciones posteriores.UAEMex INNN Se agradece a la SIEA-UAEMex por el apoyo recibido mediante el proyecto 4348/2017/CI. Así como al CONACYT a través del proyecto CB-2011-01-169558 y a la beca de doctorado otorgada a la alumna con número de CVU: 473019

    An expanded chronic care management approach to multiple chronic conditions in Hispanics using community health workers as community extenders in the Rio Grande Valley of Texas

    Get PDF
    Introduction The synergistic negative effects of type 2 diabetes (T2DM) and hypertension increases all-cause mortality and the medical complexity of management, which disproportionately impact Hispanics who face barriers to healthcare access. The Salud y Vida intervention was delivered to Hispanic adults living along the Texas-Mexico Border with comorbid poorly controlled T2DM and hypertension. The Salud y Vida multicomponent intervention incorporated community health workers (CHWs) into an expanded chronic care management model to deliver home-based follow-up visits and provided community-based diabetes self-management education. Methods We conducted multivariable longitudinal analysis to examine the longitudinal intervention effect on reducing systolic and diastolic blood pressure among 3806 participants enrolled between 2013 and 2019. Participants were compared according to their program participation as either higher (≥ 10 combined educational classes and CHW visits) or lower engagement (\u3c10 \u3eencounters). Data was collected between 2013 and 2020. Results Baseline mean systolic and diastolic blood pressure were 138 and 81 mmHg respectively. There were overall improvements in systolic (−6.49; 95% CI = [−7.13, −5.85]; p \u3c 0.001) and diastolic blood pressure (−3.97; 95% CI = [−4.37, −3.56]; p \u3c 0.001). The higher engagement group had greater systolic blood pressure reduction at 3 months (adjusted mean difference = −1.8 mmHg; 95% CI = [−3.2, −0.3]; p = 0.016) and at 15 month follow-up (adjusted mean difference = −2.3 mmHg; 95% CI = [−4.2, −0.39]; p = 0.0225) compared to the lower engagement group. Conclusion This intervention, tested and delivered in a real-world setting, provides an example of how CHW integration into an expanded chronic care model can improve blood pressure outcomes for individuals with co-morbidities

    Elliptic and hyperelliptic magnetohydrodynamic equilibria

    Full text link
    The present study is a continuation of a previous one on "hyperelliptic" axisymmetric equilibria started in [Tasso and Throumoulopoulos, Phys. Plasmas 5, 2378 (1998)]. Specifically, some equilibria with incompressible flow nonaligned with the magnetic field and restricted by appropriate side conditions like "isothermal" magnetic surfaces, "isodynamicity" or P + B^2/2 constant on magnetic surfaces are found to be reducible to elliptic integrals. The third class recovers recent equilibria found in [Schief, Phys. Plasmas 10, 2677 (2003)]. In contrast to field aligned flows, all solutions found here have nonzero toroidal magnetic field on and elliptic surfaces near the magnetic axis.Comment: 9 page

    Outcomes of elective liver surgery worldwide: a global, prospective, multicenter, cross-sectional study

    Get PDF
    Background: The outcomes of liver surgery worldwide remain unknown. The true population-based outcomes are likely different to those vastly reported that reflect the activity of highly specialized academic centers. The aim of this study was to measure the true worldwide practice of liver surgery and associated outcomes by recruiting from centers across the globe. The geographic distribution of liver surgery activity and complexity was also evaluated to further understand variations in outcomes. Methods: LiverGroup.org was an international, prospective, multicenter, cross-sectional study following the Global Surgery Collaborative Snapshot Research approach with a 3-month prospective, consecutive patient enrollment within January–December 2019. Each patient was followed up for 90 days postoperatively. All patients undergoing liver surgery at their respective centers were eligible for study inclusion. Basic demographics, patient and operation characteristics were collected. Morbidity was recorded according to the Clavien–Dindo Classification of Surgical Complications. Country-based and hospital-based data were collected, including the Human Development Index (HDI). (NCT03768141). Results: A total of 2159 patients were included from six continents. Surgery was performed for cancer in 1785 (83%) patients. Of all patients, 912 (42%) experienced a postoperative complication of any severity, while the major complication rate was 16% (341/2159). The overall 90-day mortality rate after liver surgery was 3.8% (82/2,159). The overall failure to rescue rate was 11% (82/ 722) ranging from 5 to 35% among the higher and lower HDI groups, respectively. Conclusions: This is the first to our knowledge global surgery study specifically designed and conducted for specialized liver surgery. The authors identified failure to rescue as a significant potentially modifiable factor for mortality after liver surgery, mostly related to lower Human Development Index countries. Members of the LiverGroup.org network could now work together to develop quality improvement collaboratives

    Genome Sequence of the Pea Aphid Acyrthosiphon pisum

    Get PDF
    Aphids are important agricultural pests and also biological models for studies of insect-plant interactions, symbiosis, virus vectoring, and the developmental causes of extreme phenotypic plasticity. Here we present the 464 Mb draft genome assembly of the pea aphid Acyrthosiphon pisum. This first published whole genome sequence of a basal hemimetabolous insect provides an outgroup to the multiple published genomes of holometabolous insects. Pea aphids are host-plant specialists, they can reproduce both sexually and asexually, and they have coevolved with an obligate bacterial symbiont. Here we highlight findings from whole genome analysis that may be related to these unusual biological features. These findings include discovery of extensive gene duplication in more than 2000 gene families as well as loss of evolutionarily conserved genes. Gene family expansions relative to other published genomes include genes involved in chromatin modification, miRNA synthesis, and sugar transport. Gene losses include genes central to the IMD immune pathway, selenoprotein utilization, purine salvage, and the entire urea cycle. The pea aphid genome reveals that only a limited number of genes have been acquired from bacteria; thus the reduced gene count of Buchnera does not reflect gene transfer to the host genome. The inventory of metabolic genes in the pea aphid genome suggests that there is extensive metabolite exchange between the aphid and Buchnera, including sharing of amino acid biosynthesis between the aphid and Buchnera. The pea aphid genome provides a foundation for post-genomic studies of fundamental biological questions and applied agricultural problems

    A Roadmap for HEP Software and Computing R&D for the 2020s

    Get PDF
    Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.Peer reviewe
    corecore