The absorption of gold cyanide onto activated carbon. III. Factors influencing the rate of loading and the equilibrium capacity

The results are reported of experiments on the influence of a number of variables on the rate of loading of gold cyanide onto activated carbon and the equilibrium capacity of the carbon. These variables include the concentrations of gold and free cyanide in solution, the pH value and ionic strength of the solution, the concentration of organic compounds in the solution, the temperature, the particle size of the carbon, and the mixing efficiency. The experiments were carried out under approximately steady-state conditions to simulate the conditions in a countercurrent carbon-in-pulp absorption plant. In addition, the results are reported of experiments to establish whether the absorption of gold cyanide onto activated carbon is a reversible process

The absorption of gold cyanide onto activated carbon. I. The kinetics of absorption from pulps

An account is given of the development of a relatively simple model that describes the kinetics of the absorption of gold cyanide on activated carbon. The model is based on the treatment of the carbon-solution interface as a homogeneous boundary across which gold is transported at a rate determined by the rate of mass transport to and from the interface. Rate equations derived from this model describe the results of various kinetic experiments under continuous or batch conditions in the laboratory and on operating pilot and full-scale plants

The absorption of gold cyanide onto activated carbon. II. Application of the kinetic model to multistage absorption circuits

A relatively simple rate equation for the kinetics of the absorption of gold from cyanide solutions onto activated carbon was used as the basis in the development of a model for multistage carbon-in-pulp and carbon-in-leach absorption circuits. The model was used in the prediction of both the steady-state and the transient behaviour of the absorption process, and the results were found to be in reasonable agreement with those observed in an extended pilot-plant campaign. A number of practical implications of the model are discussed, and an assessment is made of the economic consequences of the various process options available for the design of a carbon-in-pulp plant

Exogenous NG-hydroxy-l-arginine causes nitrite production in vascular smooth muscle cells in the absence of nitric oxide synthase activity

AbstractNitric oxide (NO) production from exogenous NG-hydroxy-l-arginine (OH-l-Arg) was investigated in rat aortic smooth muscle cells in culture by measuring nitrite accumulation in the culture medium. As well, the interaction between OH-l-Arg and l-arginine uptake via the y+ cationic amino acid transporter was studied. In cells without NO-synthase activity, OH-l-Arg (1–1000 μM) induced a dose-dependent nitrite production with a half-maximal effective concentration (EC50) of 18.0 ± 1.5 μM (n = 4–7). This nitrite accumulation was not inhibited by the NO-synthase inhibitor NG-nitro-l-arginine methyl ester, l-NAME (300 μM). In contrast, it was abolished by miconazole (100 μM), an inhibitor of cytochrome P450. Incubation of vascular smooth muscle cells with LPS (10 μgml) induced an l-name inhibited nitrite accumulation, but did not enhance the OH-l-Arg induced nitrite production. OH-l-Arg and other cationic amino acids, L-lysine and l-ornithine, competitively inhibited [3H]-l-arginine uptake m rat aortic smooth muscle cells, with inhibition constants of 195 ± 23 μM(n = 12), 260 ± 40 μM(n= 5) and 330 ± 10 μM(n = 5), respectively. These results show that OH-l-Arg is recognized by the cationic l-amino acid carrier present in vascular smooth muscle cells and can be oxidized to NO and nitrite in these cells in the absence of NO-synthase, probably by cytochrome P450 or by a reaction involving a cytochrome P450 byproduct

Impacts of local human activities on the Antarctic environment

We review the scientific literature, especially from the past decade, on the impacts of human activities on the Antarctic environment. A range of impacts has been identified at a variety of spatial and temporal scales. Chemical contamination and sewage disposal on the continent have been found to be long-lived. Contemporary sewage management practices at many coastal stations are insufficient to prevent local contamination but no introduction of non-indigenous organisms through this route has yet been demonstrated. Human activities, particularly construction and transport, have led to disturbances of flora and fauna. A small number of non-indigenous plant and animal species has become established, mostly on the northern Antarctic Peninsula and southern archipelagos of the Scotia Arc. There is little indication of recovery of overexploited fish stocks, and ramifications of fishing activity oil bycatch species and the ecosystem could also be far-reaching. The Antarctic Treaty System and its instruments, in particular the Convention for the Conservation of Antarctic Marine Living Resources and the Environmental Protocol, provide a framework within which management of human activities take place. In the face of the continuing expansion of human activities in Antarctica, a more effective implementation of a wide range of measures is essential, in order to ensure comprehensive protection of the Antarctic environment, including its intrinsic, wilderness and scientific values which remains a fundamental principle of the Antarctic Treaty System. These measures include effective environmental impact assessments, long-term monitoring, mitigation measures for non-indigenous species, ecosystem-based management of living resources, and increased regulation of National Antarctic Programmes and tourism activities

Processing of ultrafine-size particulate metal matrix composites by advanced shear technology

Copyright @ 2009 ASM International. This paper was published in Metallurgical & Materials Transactions A 40A(3) and is made available as an electronic reprint with the permission of ASM International. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or modification of the content of this paper are prohibited.Lack of efficient mixing technology to achieve a uniform distribution of fine-size reinforcement within the matrix and the high cost of producing components have hindered the widespread adaptation of particulate metal matrix composites (PMMCs) for engineering applications. A new rheo-processing method, the melt-conditioning high-pressure die-cast (MC-HPDC) process, has been developed for manufacturing near-net-shape components of high integrity. The MC-HPDC process adapts the well-established high shear dispersive mixing action of a twin-screw mechanism to the task of overcoming the cohesive force of the agglomerates under a high shear rate and high intensity of turbulence. This is followed by direct shaping of the slurry into near-net-shape components using an existing cold-chamber die-casting process. The results indicate that the MC-HPDC samples have a uniform distribution of ultrafine-sized SiC particles throughout the entire sample in the as-cast condition. Compared to those produced by conventional high-pressure die casting (HPDC), MC-HPDC samples have a much improved tensile strength and ductility.EP-SR

Prioritising research areas for antibiotic stewardship programmes in hospitals: a behavioural perspective consensus paper

SCOPE: Antibiotic stewardship programmes (ASPs) are necessary in hospitals to improve the judicious use of antibiotics. While ASPs require complex change of key behaviours on individual, team, organisation and policy levels, evidence from the behavioural sciences is underutilised in antibiotic stewardship studies across the world, including high-income countries (HICs). A consensus procedure was performed to propose research priority areas for optimising effective implementation of ASPs in hospital settings, using a behavioural perspective. METHODS: A workgroup for behavioural approaches to ASPs was convened in response to the fourth call for leading expert network proposals by the Joint Programming Initiative on Antimicrobial Resistance (JPIAMR). Eighteen clinical and academic specialists in antibiotic stewardship, implementation science and behaviour change from four high-income countries with publicly-funded health care systems (that is Canada, Germany, Norway and the UK), met face-to-face to agree on broad research priority areas using a structured consensus method. QUESTION ADDRESSED AND RECOMMENDATIONS: The consensus process on the 10 identified research priority areas resulted in recommendations that need urgent scientific interest and funding to optimise effective implementation of antibiotic stewardship programmes for hospital inpatients in HICs with publicly-funded health care systems. We suggest and detail, behavioural science evidence-guided research efforts in the following areas: 1) Comprehensively identifying barriers and facilitators to implementing antibiotic stewardship programmes and clinical recommendations intended to optimise antibiotic prescribing; 2) Identifying actors ('who') and actions ('what needs to be done') of antibiotic stewardship programmes and clinical teams; 3) Synthesising available evidence to support future research and planning for antibiotic stewardship programmes; 4) Specifying the activities in current antibiotic stewardship programmes with the purpose of defining a 'control group' for comparison with new initiatives; 5) Defining a balanced set of outcomes and measures to evaluate the effects of interventions focused on reducing unnecessary exposure to antibiotics; 6) Conducting robust evaluations of antibiotic stewardship programmes with built-in process evaluations and fidelity assessments; 7) Defining and designing antibiotic stewardship programmes; 8) Establishing the evidence base for impact of antibiotic stewardship programmes on resistance; 9) Investigating the role and impact of government and policy contexts on antibiotic stewardship programmes; and 10) Understanding what matters to patients in antibiotic stewardship programmes in hospitals. Assessment, revisions and updates of our priority-setting exercise should be considered, at intervals of 2 years. To propose research priority areas in low- and medium income countries (LIMCs), the methodology reported here could be applied

The contribution of qualitative behavioural assessment to appraisal of livestock welfare

Animal welfare is increasingly important for the Australian livestock industries, to maintain social licence to practice as well as ensuring market share overseas. Improvement of animal welfare in the livestock industries requires several important key steps. Paramount among these, objective measures are needed for welfare assessment that will enable comparison and contrast of welfare implications of husbandry procedures or housing options. Such measures need to be versatile (can be applied under a wide range of on- and off-farm situations), relevant (reveal aspects of the animal’s affective or physiological state that is relevant to their welfare), reliable (can be repeated with confidence in the results), relatively economic to apply, and they need to have broad acceptance by all stakeholders. Qualitative Behavioural Assessment (QBA) is an integrated measure that characterises behaviour as a dynamic, expressive body language. QBA is a versatile tool requiring little specialist equipment suiting application to in situ assessments that enables comparative, hypothesis-driven evaluation of various industry-relevant practices. QBA is being increasingly used as part of animal welfare assessments in Europe, and although most other welfare assessment methods record ‘problems’ (e.g. lameness, injury scores, and so on), QBA can capture positive aspects of animal welfare (e.g. positively engaged with their environment, playfulness). In this viewpoint, we review the outcomes of recent QBA studies and discuss the potential application of QBA, in combination with other methods, as a welfare assessment tool for the Australian livestock industries

Heavy quarkonium: progress, puzzles, and opportunities

A golden age for heavy quarkonium physics dawned a decade ago, initiated by the confluence of exciting advances in quantum chromodynamics (QCD) and an explosion of related experimental activity. The early years of this period were chronicled in the Quarkonium Working Group (QWG) CERN Yellow Report (YR) in 2004, which presented a comprehensive review of the status of the field at that time and provided specific recommendations for further progress. However, the broad spectrum of subsequent breakthroughs, surprises, and continuing puzzles could only be partially anticipated. Since the release of the YR, the BESII program concluded only to give birth to BESIII; the $B$-factories and CLEO-c flourished; quarkonium production and polarization measurements at HERA and the Tevatron matured; and heavy-ion collisions at RHIC have opened a window on the deconfinement regime. All these experiments leave legacies of quality, precision, and unsolved mysteries for quarkonium physics, and therefore beg for continuing investigations. The plethora of newly-found quarkonium-like states unleashed a flood of theoretical investigations into new forms of matter such as quark-gluon hybrids, mesonic molecules, and tetraquarks. Measurements of the spectroscopy, decays, production, and in-medium behavior of c\bar{c}, b\bar{b}, and b\bar{c} bound states have been shown to validate some theoretical approaches to QCD and highlight lack of quantitative success for others. The intriguing details of quarkonium suppression in heavy-ion collisions that have emerged from RHIC have elevated the importance of separating hot- and cold-nuclear-matter effects in quark-gluon plasma studies. This review systematically addresses all these matters and concludes by prioritizing directions for ongoing and future efforts.Comment: 182 pages, 112 figures. Editors: N. Brambilla, S. Eidelman, B. K. Heltsley, R. Vogt. Section Coordinators: G. T. Bodwin, E. Eichten, A. D. Frawley, A. B. Meyer, R. E. Mitchell, V. Papadimitriou, P. Petreczky, A. A. Petrov, P. Robbe, A. Vair

AD51B in Familial Breast Cancer

Common variation on 14q24.1, close to RAD51B, has been associated with breast cancer: rs999737 and rs2588809 with the risk of female breast cancer and rs1314913 with the risk of male breast cancer. The aim of this study was to investigate the role of RAD51B variants in breast cancer predisposition, particularly in the context of familial breast cancer in Finland. We sequenced the coding region of RAD51B in 168 Finnish breast cancer patients from the Helsinki region for identification of possible recurrent founder mutations. In addition, we studied the known rs999737, rs2588809, and rs1314913 SNPs and RAD51B haplotypes in 44,791 breast cancer cases and 43,583 controls from 40 studies participating in the Breast Cancer Association Consortium (BCAC) that were genotyped on a custom chip (iCOGS). We identified one putatively pathogenic missense mutation c.541C>T among the Finnish cancer patients and subsequently genotyped the mutation in additional breast cancer cases (n = 5259) and population controls (n = 3586) from Finland and Belarus. No significant association with breast cancer risk was seen in the meta-analysis of the Finnish datasets or in the large BCAC dataset. The association with previously identified risk variants rs999737, rs2588809, and rs1314913 was replicated among all breast cancer cases and also among familial cases in the BCAC dataset. The most significant association was observed for the haplotype carrying the risk-alleles of all the three SNPs both among all cases (odds ratio (OR): 1.15, 95% confidence interval (CI): 1.11–1.19, P = 8.88 x 10−16) and among familial cases (OR: 1.24, 95% CI: 1.16–1.32, P = 6.19 x 10−11), compared to the haplotype with the respective protective alleles. Our results suggest that loss-of-function mutations in RAD51B are rare, but common variation at the RAD51B region is significantly associated with familial breast cancer risk