Volumetric velocimetry study in a transitional wall jet flow with passive flow control via flaps

Birds are remarkably good flyers and show very special adaptations in their wings for stall delay. The pop-up of some cover feathers during starting and landing gave the idea for the present study to investigate the influence on a wall jet when inserting an array with flaps made of elastomer foil. In a wall jet with Re = 420 a flat plate and two different flap arrays (with a foil thickness of 100 and 200 µm) are measured by a time resolved 3D scanning PIV with 20 laser sheets. 2-dimensional analyses show the forming rolers between the jet flow and the surrounding fluid with a fundamental frequency of 13-14 Hz and the characteristically vortex pairing. By inserting the flap array the jet wallnormal spreading gets intensified and the vortex interaction process results in cooperative formation of larger vortices. The 3-dimensional analyses verify these results and show high 3-dimensional vortical structures which are growing when passing over a flap array. In case of the inserted flap array the vortex pairing process was delayed and accumulation of spanwise vorticity was forced to happen over the first rows of flaps, thus forming the larger structures. Already the used flap array configurations showed a significant impact influence on the jet evolution and the non-linear instabilities. Further investigations will analyze the influence of more parameters as the flap geometry or the distance to the jet flow and nozzle outlet

Au-Ag template stripped pattern for scanning probe investigations of DNA arrays produced by Dip Pen Nanolithography

We report on DNA arrays produced by Dip Pen Nanolithography (DPN) on a novel Au-Ag micro patterned template stripped surface. DNA arrays have been investigated by atomic force microscopy (AFM) and scanning tunnelling microscopy (STM) showing that the patterned template stripped substrate enables easy retrieval of the DPN-functionalized zone with a standard optical microscope permitting a multi-instrument and multi-technique local detection and analysis. Moreover the smooth surface of the Au squares (abput 5-10 angstrom roughness) allows to be sensitive to the hybridization of the oligonucleotide array with label-free target DNA. Our Au-Ag substrates, combining the retrieving capabilities of the patterned surface with the smoothness of the template stripped technique, are candidates for the investigation of DPN nanostructures and for the development of label free detection methods for DNA nanoarrays based on the use of scanning probes.Comment: Langmuir (accepted

Palaeoclimatic Control on the Composition of Palaeozoic Shales from Southern Ghana, West Africa

The Late Ordovician to Early Cretaceous Sekondian Group of southern Ghana is made up of seven major sedimentary formations. One important feature of the Sekondian Group is the abundance of fairly fresh plagioclase in the lowest two formations, i.e., the Ajua Shale and Elmina Sandstone, and at the uppermost formation (i.e., Essikado Sandstone); but a virtual absence throughout the rest of the Group. The basal part of the Sekondian Group has been interpreted as of glacial origin whereas the upper formations are thought to have formed in a warmer stage. The abundant plagioclase in the lowest two formations could, therefore, be due to less pervasive chemical weathering rather than erosion of a distinct source. In this paper, geochemical data for fine-grained sedimentary rocks of the Ajua Shale and the Takoradi Shale (that overlie the Elmina Sandstone) formations are used to investigate the influence of palaeoweathering on the composition of the Sekondian Group.The concentrations of the transition trace metals Cr, Ni, V, and Cu, and Cr/V-, Zr/Y-, and Ba/Co-ratios are similar in the samples from both formations and suggest that they were largely derived from the granitoids that intrude the Birimian supracrastal rocks. However, the Takoradi Shale samples are enriched in Rb, Cs, Th, U, and Nb relative to the Ajua Shale samples, and this may be related to differences in the degree of weathering in the source rocks. The Takoradi Shale samples are characterized by high chemical index of alteration (CIA) values and Rb/Sr ratios (CIA > 75; Rb/Sr > 1) indicating high degrees of weathering of their source rocks. In contrast, the Ajua Shale samples have low CIA values and Rb/Sr ratios (CIA < 62; Rb/Sr < 0.5) that indicate low degrees of weathering of their source. The tectonic setting at the time of deposition of both formations was passive margin suggesting that the change in paleoclimatic conditions rather than erosion rates played a more dominant role in the observed compositional changes in these shales

Prototype ATLAS IBL Modules using the FE-I4A Front-End Readout Chip

The ATLAS Collaboration will upgrade its semiconductor pixel tracking detector with a new Insertable B-layer (IBL) between the existing pixel detector and the vacuum pipe of the Large Hadron Collider. The extreme operating conditions at this location have necessitated the development of new radiation hard pixel sensor technologies and a new front-end readout chip, called the FE-I4. Planar pixel sensors and 3D pixel sensors have been investigated to equip this new pixel layer, and prototype modules using the FE-I4A have been fabricated and characterized using 120 GeV pions at the CERN SPS and 4 GeV positrons at DESY, before and after module irradiation. Beam test results are presented, including charge collection efficiency, tracking efficiency and charge sharing.Comment: 45 pages, 30 figures, submitted to JINS

Search for the standard model Higgs boson in the H to ZZ to 2l 2nu channel in pp collisions at sqrt(s) = 7 TeV

A search for the standard model Higgs boson in the H to ZZ to 2l 2nu decay channel, where l = e or mu, in pp collisions at a center-of-mass energy of 7 TeV is presented. The data were collected at the LHC, with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. No significant excess is observed above the background expectation, and upper limits are set on the Higgs boson production cross section. The presence of the standard model Higgs boson with a mass in the 270-440 GeV range is excluded at 95% confidence level.Comment: Submitted to JHE

Combined search for the quarks of a sequential fourth generation

Results are presented from a search for a fourth generation of quarks produced singly or in pairs in a data set corresponding to an integrated luminosity of 5 inverse femtobarns recorded by the CMS experiment at the LHC in 2011. A novel strategy has been developed for a combined search for quarks of the up and down type in decay channels with at least one isolated muon or electron. Limits on the mass of the fourth-generation quarks and the relevant Cabibbo-Kobayashi-Maskawa matrix elements are derived in the context of a simple extension of the standard model with a sequential fourth generation of fermions. The existence of mass-degenerate fourth-generation quarks with masses below 685 GeV is excluded at 95% confidence level for minimal off-diagonal mixing between the third- and the fourth-generation quarks. With a mass difference of 25 GeV between the quark masses, the obtained limit on the masses of the fourth-generation quarks shifts by about +/- 20 GeV. These results significantly reduce the allowed parameter space for a fourth generation of fermions.Comment: Replaced with published version. Added journal reference and DO

A Flux-weakening Strategy for Current-Regulated Surface-mounted Permanent-magnet Machine Drives

Permanent-magnet synchronous machines fed from current-regulated converters feature nearly ideal performance at low-to-moderate speeds. However, as rotor speed increases the back emf rises which results in loss of current regulation and decreased torque. In buried-magnet machine drives, flux weakening is often used to extend the speed range. This paper sets forth a flux-weakening control specifically designed for surface-mounted permanent-magnet machines which is simple and does not require knowledge of the machine or system parameters. The proposed method is demonstrated both experimentally and through the use of computer simulatio

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns