Birds are remarkably good flyers and show very special adaptations in their wings for stall delay. The pop-up of some cover feathers during starting and landing gave the idea for the present study to investigate the influence on a wall jet when inserting an array with flaps made of elastomer foil. In a wall jet with Re = 420 a flat plate and two different flap arrays (with a foil thickness of 100 and 200 µm) are measured by a time resolved 3D scanning PIV with 20 laser sheets. 2-dimensional analyses show the forming rolers between the jet flow and the surrounding fluid with a fundamental frequency of 13-14 Hz and the characteristically vortex pairing. By inserting the flap array the jet wallnormal spreading gets intensified and the vortex interaction process results in cooperative formation of larger vortices. The 3-dimensional analyses verify these results and show high 3-dimensional vortical structures which are growing when passing over a flap array. In case of the inserted flap array the vortex pairing process was delayed and accumulation of spanwise vorticity was forced to happen over the first rows of flaps, thus forming the larger structures. Already the used flap array configurations showed a significant impact influence on the jet evolution and the non-linear instabilities. Further investigations will analyze the influence of more parameters as the flap geometry or the distance to the jet flow and nozzle outlet
