Rex1p Deficiency Leads to Accumulation of Precursor Initiator tRNA\u3csup\u3eMet\u3c/sup\u3e and Polyadenylation of Substrate RNAs in \u3cem\u3eSaccharomyces cerevisiae\u3c/em\u3e

A synthetic genetic array was used to identify lethal and slow-growth phenotypes produced when a mutation in TRM6, which encodes a tRNA modification enzyme subunit, was combined with the deletion of any non-essential gene in Saccharomyces cerevisiae. We found that deletion of the REX1 gene resulted in a slow-growth phenotype in the trm6-504 strain. Previously, REX1 was shown to be involved in processing the 3′ ends of 5S rRNA and the dimeric tRNAArg-tRNAAsp. In this study, we have discovered a requirement for Rex1p in processing the 3′ end of tRNAiMet precursors and show that precursor tRNAiMet accumulates in a trm6-504 rex1Δ strain. Loss of Rex1p results in polyadenylation of its substrates, including tRNAiMet, suggesting that defects in 3′ end processing can activate the nuclear surveillance pathway. Finally, purified Rex1p displays Mg2+-dependent ribonuclease activity in vitro, and the enzyme is inactivated by mutation of two highly conserved amino acids

Assessing radiative transfer models trained by numerical weather forecasts using sun-tracking radiometric measurements for satellite link characterization up to W band

Radio communications, and in particular Earth-to-satellite links, are worldwide used for delivering digital services. The bandwidth demand of such services is increasing accordingly to the advent of more advanced applications (e.g., multimedia services, deep-space explorations, etc.) thus pushing the scientific community toward the investigation of channel carriers at higher frequencies. When using carrier frequencies above X band, the main drawback is how to tackle the impact of tropospheric processes (i.e., rain, cloud, water vapor). This work assesses the joint use of weather forecast models, radiative transfer models and Sun-tracking radiometric measurements to explore their potential benefits in predicting path attenuation and sky noise temperature for slant paths at frequencies between K and W band, thus paving the way to the optimization of satellite link-budgets

Scanning Electron Microscopy Study of Particles Generated by Laser Damage of Aluminum Surfaces

A high intensity iodine laser (1.315 μm wavelength) was used to study laser-surface damage in vacuum. A 22mm diameter laser beam containing 3.9 J of energy was focused to a 1 mm spot on an aluminum plate mounted in a vacuum chamber. The laser pulse width was 7 μs (FWHM). A copper strip mounted on a quarter circle plate 3.5 cm from the laser spot was used to collect particles ejected from the surface. A scanning electron microscope (SEM) was used to measure the size and spatial distribution of the particles collected on the copper strip. It was found that aluminum droplets were ejected from the crater formed by the laser pulse. The particle sizes ranged from 0.25 to 45 μm in diameter. The peak of the particle size distribution occurred at 1 μm diameter. The maximum spatial distribution of droplets occurred at near 47° from the normal to the target surface. Measurement of the mass lost by the target plate and the volume of aluminum removed from the craters showed that most of the aluminum ejected from the craters remained on the target surface. SEM examination of the surface adjacent to the craters showed that most of the ejected aluminum was liquid splattered around the crater. The particle size and spatial distributions are considered preliminary because droplets smaller than 0.25 μm could not be detected and the copper collector strip was examined in only six areas corresponding to six emission angles

The effect of orientation of retinal configuration upon accommodation and convergence

The effect of orientation of retinal configuration upon accommodation and convergenc

Experimental evaluation of confidence interval procedures in sequential steady-state simulation

Sequential analysis of simulation output is generally accepted as the most efficient way for securing representativeness of samples of collected observations. In this scenario a simulation experiment is stopped when the relative precision of estimates, defined as the relative width of confidence intervals at an assumed confidence level, reaches the required level. This paper deals with the statistical correctness of the methods proposed for estimating confidence intervals for mean values in sequential steady-state stochastic simulation. We formulate basic rules that should be followed in proper experimental analysis of coverage of different steadystate interval estimators. Our main argument is that such analysis should be done sequentially. The numerical results of our preliminary coverage analysis of the method of Spectral Analysis (SA/HW) and Nonoverlapping Batch Means are presented, and compared with those obtained by traditional, non-sequential approaches

Nearly degenerate two-beam coupling in photorefractive crystals with two species of movable carriers

Two-beam intensity coupling is calculated for photorefractive crystals with two types of movable charge carrier in the undepleted-pump approximation. The analytical expressions are derived for the temporal evolution of the space-charge field; for weak coupling they are used for calculation of the transmitted beam intensities. The results of the calculation are compared with the experimental observations in photorefractive tin hypothiodiphosphate (Sn 2 P 2 S 6 ). All experimental data are in reasonable quantitative agreement with the calculations. © 1998 Optical Society of America [S0740-3224(98

Turbulent flow at 190 m height above London during 2006-2008: A climatology and the applicability of similarity theory

Flow and turbulence above urban terrain is more complex than above rural terrain, due to the different momentum and heat transfer characteristics that are affected by the presence of buildings (e.g. pressure variations around buildings). The applicability of similarity theory (as developed over rural terrain) is tested using observations of flow from a sonic anemometer located at 190.3 m height in London, U.K. using about 6500 h of data. Turbulence statistics—dimensionless wind speed and temperature, standard deviations and correlation coefficients for momentum and heat transfer—were analysed in three ways. First, turbulence statistics were plotted as a function only of a local stability parameter z/Λ (where Λ is the local Obukhov length and z is the height above ground); the σ_i/u_* values (i = u, v, w) for neutral conditions are 2.3, 1.85 and 1.35 respectively, similar to canonical values. Second, analysis of urban mixed-layer formulations during daytime convective conditions over London was undertaken, showing that atmospheric turbulence at high altitude over large cities might not behave dissimilarly from that over rural terrain. Third, correlation coefficients for heat and momentum were analyzed with respect to local stability. The results give confidence in using the framework of local similarity for turbulence measured over London, and perhaps other cities. However, the following caveats for our data are worth noting: (i) the terrain is reasonably flat, (ii) building heights vary little over a large area, and (iii) the sensor height is above the mean roughness sublayer depth

Modelling chemistry in the nocturnal boundary layer above tropical rainforest and a generalised effective nocturnal ozone deposition velocity for sub-ppbv NOx conditions

Measurements of atmospheric composition have been made over a remote rainforest landscape. A box model has previously been demonstrated to model the observed daytime chemistry well. However the box model is unable to explain the nocturnal measurements of relatively high [NO] and [O3], but relatively low observed [NO2]. It is shown that a one-dimensional (1-D) column model with simple O3 -NOx chemistry and a simple representation of vertical transport is able to explain the observed nocturnal concentrations and predict the likely vertical profiles of these species in the nocturnal boundary layer (NBL). Concentrations of tracers carried over from the end of the night can affect the atmospheric chemistry of the following day. To ascertain the anomaly introduced by using the box model to represent the NBL, vertically-averaged NBL concentrations at the end of the night are compared between the 1-D model and the box model. It is found that, under low to medium [NOx] conditions (NOx <1 ppbv), a simple parametrisation can be used to modify the box model deposition velocity of ozone, in order to achieve good agreement between the box and 1-D models for these end-of-night concentrations of NOx and O3. This parametrisation would could also be used in global climate-chemistry models with limited vertical resolution near the surface. Box-model results for the following day differ significantly if this effective nocturnal deposition velocity for ozone is implemented; for instance, there is a 9% increase in the following day’s peak ozone concentration. However under medium to high [NOx] conditions (NOx > 1 ppbv), the effect on the chemistry due to the vertical distribution of the species means no box model can adequately represent chemistry in the NBL without modifying reaction rate constants

Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS

The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations