Twisted algebra R-matrices and S-matrices for bn(1)b_n^{(1)} affine Toda solitons and their bound states

We construct new $U_q(a^{(2)}_{2n-1})$ and $U_q(e^{(2)}_6)$ invariant $R$-matrices and comment on the general construction of $R$-matrices for twisted algebras. We use the former to construct $S$-matrices for $b^{(1)}_n$ affine Toda solitons and their bound states, identifying the lowest breathers with the $b^{(1)}_n$ particles.Comment: Latex, 24 pages. Various misprints corrected. New section added clarifying relationship between R-matrices and S-matrice

Emission limit values for building materials. Environmental foundation and consequences for building materials

This report presents alternative emission limit values for inorganic components to be used in the revision of the Building Materials Decree (1999) in the Netherlands. Three key factors determine the emission limit value: (1) the environmental compartment under consideration, with its dimensions and the accounted for, (2) the desired level of environmental protection and (3) the scenario applying to the intended use of the construction material. Emission limit values have been derived here from modelled concentrations in soil, groundwater and surface water. The desired level of protection has been elaborated as a stand-still approach (based on quality target values and a risk-based approach (based on PNECs). Two exposure models were used for taking the effects of a time-dependent exposure of the soil to leached components into account, for vertical transport through the soil profile and for retardation of components in the soil profile. The PEARL model was used for binding described by equilibrium adsorption. The ORCHESTRA model was used for binding that also takes speciation into account. For surface water, a dilution factor was computed assuming a certain mixing zone, dependent on the size of the surface water. The consequences of the proposed alternative emission limit values have been estimated on the basis of information in a database containing results of leaching tests for construction materials. The alternatives proposed form the basis for a political decision-making process, where environmental protection will be balanced with other socio-economic concerns.In dit rapport worden varianten berekend die de huidige normen voor het hergebruik van bouwmaterialen - zoals vastgelegd in het Bouwstoffenbesluit 1999 - kunnen vervangen. De huidige normen vormden een belemmering voor het hergebruik van bouwmaterialen. Omdat er wel behoefte bestond aan hergebruik, zijn de mogelijkheden tot een eventuele verruiming, die wel milieuverantwoord blijft, onderzocht. Het bouwstoffenbesluit bevat normen voor de maximale uitstoot van anorganische stoffen (zoals metalen) in bouwmaterialen. Milieuhygienische belangen worden nu afgewogen tegen de wens tot ruimere mogelijkheden voor hergebruik. Het onderzoek houdt rekening met verschillende elementen bij het hergebruik van bouwmaterialen: het milieucompartiment, het gewenste beschermingsniveau en het toepassingsscenario van de bouwstof. Er zijn twee alternatieve computermodellen gebruikt, die de verschillen in de wijzen waarop vrijgekomen stoffen zich aan de bodem binden, berekenen. Daarnaast is ook de menging van vrijgekomen stoffen voor oppervlaktewater berekend. De berekende waarden zijn afgezet tegen de kwaliteitsgegevens van bouwstoffen die door verschillende bedrijfstakken zijn aangeleverd. De voorgestelde varianten maken onderdeel uit van een beleidsmatig besluitvormingsproces, waarbij ook andere socio-economische aspecten worden afgewogen

Destabilization of the thermohaline circulation by transient perturbations to the hydrological cycle

We reconsider the problem of the stability of the thermohaline circulation as described by a two-dimensional Boussinesq model with mixed boundary conditions. We determine how the stability properties of the system depend on the intensity of the hydrological cycle. We define a two-dimensional parameters' space descriptive of the hydrology of the system and determine, by considering suitable quasi-static perturbations, a bounded region where multiple equilibria of the system are realized. We then focus on how the response of the system to finite-amplitude surface freshwater forcings depends on their rate of increase. We show that it is possible to define a robust separation between slow and fast regimes of forcing. Such separation is obtained by singling out an estimate of the critical growth rate for the anomalous forcing, which can be related to the characteristic advective time scale of the system.Comment: 37 pages, 8 figures, submitted to Clim. Dy

Formation of Supermassive Black Holes

Evidence shows that massive black holes reside in most local galaxies. Studies have also established a number of relations between the MBH mass and properties of the host galaxy such as bulge mass and velocity dispersion. These results suggest that central MBHs, while much less massive than the host (~ 0.1%), are linked to the evolution of galactic structure. In hierarchical cosmologies, a single big galaxy today can be traced back to the stage when it was split up in hundreds of smaller components. Did MBH seeds form with the same efficiency in small proto-galaxies, or did their formation had to await the buildup of substantial galaxies with deeper potential wells? I briefly review here some of the physical processes that are conducive to the evolution of the massive black hole population. I will discuss black hole formation processes for `seed' black holes that are likely to place at early cosmic epochs, and possible observational tests of these scenarios.Comment: To appear in The Astronomy and Astrophysics Review. The final publication is available at http://www.springerlink.co

A second generation cervico-vaginal lavage device shows similar performance as its preceding version with respect to DNA yield and HPV DNA results

Contains fulltext : 118480.pdf (publisher's version ) (Open Access)BACKGROUND: Attendance rates of cervical screening programs can be increased by offering HPV self-sampling to non-attendees. Acceptability, DNA yield, lavage volumes and choice of hrHPV test can influence effectiveness of the self-sampling procedures and could therefore play a role in recruiting non-attendees. To increase user-friendliness, a frequently used lavage sampler was modified. In this study, we compared this second generation lavage device with the first generation device within similar birth cohorts. METHODS: Within a large self-sampling cohort-study among non-responders of the Dutch cervical screening program, a subset of 2,644 women received a second generation self-sampling lavage device, while 11,977 women, matched for age and ZIP-code, received the first generation model. The second generation device was different in shape, color, lavage volume, and packaging, in comparison to its first generation model. The Cochran's test was used to compare both devices for hrHPV positivity rate and response rate. To correct for possible heterogeneity between age and ZIP codes in both groups the Breslow-Day test of homogeneity was used. A T-test was utilized to compare DNA yields of the obtained material in both groups. RESULTS: Median DNA yields were 90.4 mug/ml (95% CI 83.2-97.5) and 91.1 mug/ml (95% CI 77.8-104.4, p= 0.726) and hrHPV positivity rates were 8.2% and 6.9% (p= 0.419) per sample self-collected by the second - and the first generation of the device (p= 0.726), respectively. In addition, response rates were comparable for the two models (35.4% versus 34.4%, p= 0.654). CONCLUSIONS: Replacing the first generation self-sampling device by an ergonomically improved, second generation device resulted in equal DNA yields, comparable hrHPV positivity rates and similar response rates. Therefore, it can be concluded that the clinical performance of the first and second generation models are similar. Moreover, participation of non-attendees in cervical cancer screening is probably not predominantly determined by the type of self-collection device

Differential branching fraction and angular analysis of Λb0→Λμ+μ−\Lambda^{0}_{b} \rightarrow \Lambda \mu^+\mu^- decays

The differential branching fraction of the rare decay $\Lambda^{0}_{b} \rightarrow \Lambda \mu^+\mu^-$ is measured as a function of $q^{2}$, the square of the dimuon invariant mass. The analysis is performed using proton-proton collision data, corresponding to an integrated luminosity of 3.0 \mbox{ fb}^{-1}, collected by the LHCb experiment. Evidence of signal is observed in the $q^2$ region below the square of the $J/\psi$ mass. Integrating over 15 < q^{2} < 20 \mbox{ GeV}^2/c^4 the branching fraction is measured as d\mathcal{B}(\Lambda^{0}_{b} \rightarrow \Lambda \mu^+\mu^-)/dq^2 = (1.18 ^{+ 0.09} _{-0.08} \pm 0.03 \pm 0.27) \times 10^{-7} ( \mbox{GeV}^{2}/c^{4})^{-1}, where the uncertainties are statistical, systematic and due to the normalisation mode, $\Lambda^{0}_{b} \rightarrow J/\psi \Lambda$, respectively. In the $q^2$ intervals where the signal is observed, angular distributions are studied and the forward-backward asymmetries in the dimuon ($A^{l}_{\rm FB}$) and hadron ($A^{h}_{\rm FB}$) systems are measured for the first time. In the range 15 < q^2 < 20 \mbox{ GeV}^2/c^4 they are found to be A^{l}_{\rm FB} = -0.05 \pm 0.09 \mbox{ (stat)} \pm 0.03 \mbox{ (syst)} and A^{h}_{\rm FB} = -0.29 \pm 0.07 \mbox{ (stat)} \pm 0.03 \mbox{ (syst)}.Comment: 27 pages, 10 figures, Erratum adde

The Formation and Evolution of the First Massive Black Holes

The first massive astrophysical black holes likely formed at high redshifts (z>10) at the centers of low mass (~10^6 Msun) dark matter concentrations. These black holes grow by mergers and gas accretion, evolve into the population of bright quasars observed at lower redshifts, and eventually leave the supermassive black hole remnants that are ubiquitous at the centers of galaxies in the nearby universe. The astrophysical processes responsible for the formation of the earliest seed black holes are poorly understood. The purpose of this review is threefold: (1) to describe theoretical expectations for the formation and growth of the earliest black holes within the general paradigm of hierarchical cold dark matter cosmologies, (2) to summarize several relevant recent observations that have implications for the formation of the earliest black holes, and (3) to look into the future and assess the power of forthcoming observations to probe the physics of the first active galactic nuclei.Comment: 39 pages, review for "Supermassive Black Holes in the Distant Universe", Ed. A. J. Barger, Kluwer Academic Publisher

Continuation for thin film hydrodynamics and related scalar problems

This chapter illustrates how to apply continuation techniques in the analysis of a particular class of nonlinear kinetic equations that describe the time evolution through transport equations for a single scalar field like a densities or interface profiles of various types. We first systematically introduce these equations as gradient dynamics combining mass-conserving and nonmass-conserving fluxes followed by a discussion of nonvariational amendmends and a brief introduction to their analysis by numerical continuation. The approach is first applied to a number of common examples of variational equations, namely, Allen-Cahn- and Cahn-Hilliard-type equations including certain thin-film equations for partially wetting liquids on homogeneous and heterogeneous substrates as well as Swift-Hohenberg and Phase-Field-Crystal equations. Second we consider nonvariational examples as the Kuramoto-Sivashinsky equation, convective Allen-Cahn and Cahn-Hilliard equations and thin-film equations describing stationary sliding drops and a transversal front instability in a dip-coating. Through the different examples we illustrate how to employ the numerical tools provided by the packages auto07p and pde2path to determine steady, stationary and time-periodic solutions in one and two dimensions and the resulting bifurcation diagrams. The incorporation of boundary conditions and integral side conditions is also discussed as well as problem-specific implementation issues

Predicting climate change using response theory: global averages and spatial patterns

The provision of accurate methods for predicting the climate response to anthropogenic and natural forcings is a key contemporary scientific challenge. Using a simplified and efficient open-source general circulation model of the atmosphere featuring O(105105) degrees of freedom, we show how it is possible to approach such a problem using nonequilibrium statistical mechanics. Response theory allows one to practically compute the time-dependent measure supported on the pullback attractor of the climate system, whose dynamics is non-autonomous as a result of time-dependent forcings. We propose a simple yet efficient method for predicting—at any lead time and in an ensemble sense—the change in climate properties resulting from increase in the concentration of CO22 using test perturbation model runs. We assess strengths and limitations of the response theory in predicting the changes in the globally averaged values of surface temperature and of the yearly total precipitation, as well as in their spatial patterns. The quality of the predictions obtained for the surface temperature fields is rather good, while in the case of precipitation a good skill is observed only for the global average. We also show how it is possible to define accurately concepts like the inertia of the climate system or to predict when climate change is detectable given a scenario of forcing. Our analysis can be extended for dealing with more complex portfolios of forcings and can be adapted to treat, in principle, any climate observable. Our conclusion is that climate change is indeed a problem that can be effectively seen through a statistical mechanical lens, and that there is great potential for optimizing the current coordinated modelling exercises run for the preparation of the subsequent reports of the Intergovernmental Panel for Climate Change

Community assessment to advance computational prediction of cancer drug combinations in a pharmacogenomic screen

The effectiveness of most cancer targeted therapies is short-lived. Tumors often develop resistance that might be overcome with drug combinations. However, the number of possible combinations is vast, necessitating data-driven approaches to find optimal patient-specific treatments. Here we report AstraZeneca's large drug combination dataset, consisting of 11,576 experiments from 910 combinations across 85 molecularly characterized cancer cell lines, and results of a DREAM Challenge to evaluate computational strategies for predicting synergistic drug pairs and biomarkers. 160 teams participated to provide a comprehensive methodological development and benchmarking. Winning methods incorporate prior knowledge of drug-target interactions. Synergy is predicted with an accuracy matching biological replicates for >60% of combinations. However, 20% of drug combinations are poorly predicted by all methods. Genomic rationale for synergy predictions are identified, including ADAM17 inhibitor antagonism when combined with PIK3CB/D inhibition contrasting to synergy when combined with other PI3K-pathway inhibitors in PIK3CA mutant cells